diff --git a/phones/yealink/t19-t31/asterprov/templates/yealink-t19-t31-tmpl.cfg b/phones/yealink/t19-t31/asterprov/templates/yealink-t19-t31-tmpl.cfg new file mode 100644 index 0000000..42bb96a --- /dev/null +++ b/phones/yealink/t19-t31/asterprov/templates/yealink-t19-t31-tmpl.cfg @@ -0,0 +1,25 @@ +#!version:1.0.0.1 + +### This file is the exported MAC-all.cfg. + +account.1.auth_name = ${USERNAME} +account.1.display_name = ${USERNAME} +account.1.enable = 1 +account.1.label = ${USERNAME} +account.1.sip_server.1.address = ${SERVER} +account.1.sip_server.1.port = ${SERVER_PORT} +account.1.sip_server.1.expires = 360 +account.1.user_name = ${USERNAME} +account.1.password = ${SECRET} +lang.gui = Russian +lang.wui = Russian +local_time.ntp_server1 = ru.pool.ntp.org +local_time.ntp_server2 = cn.pool.ntp.org +### Static Configuration ### +static.auto_provision.power_on = 1 +static.auto_provision.server.url = http://${SERVER}:8088/phoneprov +static.auto_provision.repeat.enable = 1 +static.auto_provision.repeat.minutes = 720 +### Remote Phonebook ### +#remote_phonebook.data.1.url = http://${SERVER}/ats_sip.xml +#remote_phonebook.data.1.name = Телефонная книга \ No newline at end of file diff --git a/phones/yealink/t19-t31/orig/t19.cfg b/phones/yealink/t19-t31/orig/t19.cfg new file mode 100644 index 0000000..98763ba --- /dev/null +++ b/phones/yealink/t19-t31/orig/t19.cfg @@ -0,0 +1,56 @@ +#!version:1.0.0.1 +account.1.enable = 1 +account.1.label = 150 +account.1.display_name = 150 +account.1.user_name = 150 +account.1.auth_name = 150 +account.1.enable_user_equal_phone = 1 +account.1.dtmf.type = 0 +account.1.dtmf.dtmf_payload = 96 +account.1.nat.udp_update_enable = 0 +account.1.sip_server.1.address = 10.16.73.90 +account.1.sip_server.1.expires = 360 +voice.tone.country = Russia +phone_setting.ring_type = Ring7.wav +phone_setting.custom_forward_type = 256 +forward.no_answer.target = 89028744795 +phone_setting.contrast = 8 +voice.group_listening.spk_vol = 15 +features.ldap.input_type = 123 +phone_setting.redial_user_name = Обухова Людмила +phone_setting.redial_number = 440 +phone_setting.redial_server = 10.16.73.90 +phone_setting.call_return_user_name = 150 +phone_setting.call_return_number = 133 +phone_setting.call_return_server = 10.16.73.90 +features.remote_phonebook.enable = 1 +phone_setting.custom_headset_mode_status = 1 +network.internet_port.ip = 192.168.0.202 +network.internet_port.mask = 255.255.255.0 +network.internet_port.gateway = 192.168.0.10 +network.primary_dns = 192.168.0.1 +sip.nat_stun.server = mangosip.ru +local_time.time_zone = -3 +local_time.time_zone_name = None +local_time.dhcp_time = 1 +programablekey.3.type = 22 +programablekey.3.line = %NULL% +programablekey.3.value = %NULL% +programablekey.3.label = %NULL% +programablekey.3.extension = %NULL% +programablekey.3.xml_phonebook = 0 +programablekey.3.pickup_value = %NULL% +programablekey.7.type = 0 +programablekey.7.line = 0 +programablekey.7.value = %NULL% +programablekey.7.label = %NULL% +programablekey.7.extension = %NULL% +programablekey.7.xml_phonebook = %NULL% +programablekey.7.pickup_value = %NULL% +programablekey.8.type = 0 +programablekey.8.line = 0 +programablekey.8.value = %NULL% +programablekey.8.label = %NULL% +programablekey.8.extension = %NULL% +programablekey.8.xml_phonebook = %NULL% +programablekey.8.pickup_value = %NULL% diff --git a/phones/yealink/t19-t31/orig/t21.cfg b/phones/yealink/t19-t31/orig/t21.cfg new file mode 100644 index 0000000..5523a71 --- /dev/null +++ b/phones/yealink/t19-t31/orig/t21.cfg @@ -0,0 +1,90 @@ +#!version:1.0.0.1 + +### This file is the exported MAC-all.cfg. + +### For security, the following parameters with password haven't been display in this file. +###account.1.password = +###account.2.password = +account.1.always_fwd.target = 9122437782 +account.1.auth_name = 199 +account.1.display_name = 199 +account.1.dtmf.info_type = 0 +account.1.enable = 1 +account.1.label = 199 +account.1.sip_server.1.address = 10.16.73.90 +account.1.sip_server.1.expires = 180 +account.1.transfer_refer_to_contact_header.enable = 1 +account.1.user_name = 199 +account.17.codec.ilbc.payload_type = iLBC +account.17.dtmf.info_type = 0 +account.17.transfer_refer_to_contact_header.enable = 1 +account.2.always_fwd.target = 9122437782 +account.2.auth_name = 143 +account.2.dialoginfo_callpickup = 1 +account.2.display_name = 143 +account.2.dtmf.info_type = 0 +account.2.enable = 1 +account.2.label = 143 +account.2.sip_server.1.address = 10.16.73.90 +account.2.sip_server.1.expires = 180 +account.2.transfer_refer_to_contact_header.enable = 1 +account.2.user_name = 143 +bw.feature_key_sync = 0 +default_input_method.advanced_setting_password = 123 +directory.search_default_input_method = ABC +features.call_num_filter = ,- +features.csta.enable = 1 +features.fwd_mode = 1 +features.pickup.blf_audio_enable = 1 +features.pickup.blf_visual_enable = 1 +features.pickup.group_pickup_enable = 1 +features.redial_via_local_sip_server.enable = 0 +features.remote_phonebook.enable = 1 +features.resume_after_exit_transfer.enable = 0 +features.rfc5168.enable = 1 +features.show_default_account = 0 +features.voice_mail_alert.enable = 1 +forward.always.enable = 1 +forward.always.target = 9122437782 +forward.no_answer.target = 9122437782 +linekey.1.line = 2 +linekey.2.label = 199 +linekey.2.line = 1 +linekey.3.line = 3 +linekey.3.type = 15 +local_time.time_zone = +5 +local_time.time_zone_name = None +multicast.receive_priority.priority = 10 +packet_capture.max_file_counts = 5 +phone_setting.called_party_info_display.enable = 1 +programablekey.1.history_type = 0 +programablekey.1.line = 1 +programablekey.2.line = 1 +programablekey.2.type = 22 +programablekey.2.xml_phonebook = 0 +programablekey.5.history_type = 0 +programablekey.5.line = 1 +sip.listen_port = 52456 +sip.tcp_port_random_mode = 0 +sip.tls_listen_port = 52457 +sip.use_out_bound_in_dialog = 1 +super_search.recent_call = 0 +voice.handfree.spk_vol = 10 +voice.ring_vol = 3 +### Static Configuration ### +static.auto_provision.local_log.backup.append = 1 +static.auto_provision.local_log.backup.append.limit_mode = 1 +static.auto_provision.local_log.backup.append.max_file_size = 512 +static.features.default_account = 2 +static.network.attempt_expired_time = 5 +static.network.cdp.enable = 0 +static.network.dns.query_timeout = 8 +static.network.dns.ttl_enable = 0 +static.network.wifi.internet_port.type = 0 +static.network.wifi.ip_address_mode = 0 +static.network.wifi.ipv6_icmp_v6.enable = 1 +static.network.wifi.ipv6_internet_port.type = 0 +static.network.wifi.ipv6_prefix = 64 +static.network.wifi.ipv6_static_dns_enable = 0 +static.network.wifi.preference = 0 +static.network.wifi.static_dns_enable = 0 diff --git a/phones/yealink/t19-t31/orig/t31.cfg b/phones/yealink/t19-t31/orig/t31.cfg new file mode 100644 index 0000000..5053a92 --- /dev/null +++ b/phones/yealink/t19-t31/orig/t31.cfg @@ -0,0 +1,13 @@ +#!version:1.0.0.1 + +### This file is the exported MAC-all.cfg. + +### For security, the following parameters with password haven't been display in this file. +###account.1.password = +account.1.auth_name = 148 +account.1.display_name = 148 +account.1.enable = 1 +account.1.label = 148 +account.1.sip_server.1.address = 10.16.73.90 +account.1.user_name = 148 +voice.handset.spk_vol = 11 diff --git a/phones/yealink/t41-t46/orig/full-config-tmpl.cfg b/phones/yealink/t41-t46/orig/full-config-tmpl.cfg new file mode 100644 index 0000000..f9fd1c1 --- /dev/null +++ b/phones/yealink/t41-t46/orig/full-config-tmpl.cfg @@ -0,0 +1,1464 @@ +#!version:1.0.0.1 + +##File header "#!version:1.0.0.1" can not be edited or deleted, and must be placed in the first line.## +##This template file is applicable to SIP-T28P/T26P/T22P/T20P/T21P/T19P/T46G/T42G/T41P IP phones running firmware version 72 or later.## +##For more information on configuration parameters, refer to Yealink_SIP-T2_Series_T19P_T4_Series_IP_Phones_Auto_Provisioning_Guide.## + +####################################################################################### +## Hostname ## +####################################################################################### +network.dhcp_host_name = + +####################################################################################### +## PPPoE(Except T41P/T42G Models) ## +####################################################################################### +network.pppoe.user = +network.pppoe.password = + + +####################################################################################### +## Network Advanced ## +####################################################################################### +##It enables or disables the PC port.0-Disabled,1-Auto Negotiation. +##The default value is 1.It takes effect after a reboot. +network.pc_port.enable = + +##It configures the transmission mode and speed of the Internet (WAN) port. +##0-Auto negotiate +##1-Full duplex 10Mbps +##2-Full duplex 100Mbps +##3-Half duplex 10Mbps +##4-Half duplex 100Mbps +##5-Full duplex 1000Mbps (only applicable to SIP-T42G and SIP-T46G IP phones) +##The default value is 0.It takes effect after a reboot. +network.internet_port.speed_duplex = + +##It configures the transmission mode and speed of the PC (LAN) port. +##0-Auto negotiate +##1-Full duplex 10Mbps +##2-Full duplex 100Mbps +##3-Half duplex 10Mbps +##4-Half duplex 100Mbps +##5-Full duplex 1000Mbps (only applicable to SIP-T42G and SIP-T46G IP phones) +##The default value is 0.It takes effect after a reboot. +network.pc_port.speed_duplex = + +##It enables or disables the phone to use manually configured static IPv4 DNS when Internet (WAN) port type for IPv4 is configured as DHCP. +##0-Disabled (use the IPv4 DNS obtained by DHCP) 1-Enabled +##The default value is 0.It takes effect after a reboot. +network.static_dns_enable = + +network.ipv6_static_dns_enable = + +###Only T41P/T42G/T46G Models support this parameter +network.vlan.pc_port_mode = +##It enable or disable to use A record of TTL +##The defalue value is 1;0-Disable 1-Enable + +network.dns.ttl_enable = +##It configures the LAN MTU (Except T21D/T19D) +##The default value is 1500,.Integer from 128 to 1500.It takes effect after a reboot. +network.mtu_value = + + +####################################################################################### +## VLAN ## +####################################################################################### +network.vlan.internet_port_enable = +network.vlan.internet_port_vid = +network.vlan.internet_port_priority = +network.vlan.pc_port_enable = +network.vlan.pc_port_vid = +network.vlan.pc_port_priority = +network.vlan.dhcp_enable = +network.vlan.dhcp_option = +##It configures LLDP or manually VLAN can't obtain IP, whether to switch to other methods of VLAN or closed VLAN to get IP +##(Except T19P/T21P Models) 0-Disable 1-Enable +network.vlan.vlan_change.enable = + +####################################################################################### +## WEB Port ## +####################################################################################### +##It configures the HTTP port for web server access. +##The default value is 80.It takes effect after a reboot. +network.port.http = + +##It configures the HTTPS port for web server access. +##The default value is 443.It takes effect after a reboot. +network.port.https = + +wui.https_enable = +wui.http_enable = + +####################################################################################### +## QoS ## +####################################################################################### +##It configures the voice QoS. +##The default value is 46.It takes effect after a reboot.Integer from 0 to 63 +network.qos.rtptos = + +##It configures the SIP QoS. +##The default value is 26.It takes effect after a reboot.Integer from 0 to 63 +network.qos.signaltos = + +####################################################################################### +## 802.1X ## +####################################################################################### +network.802_1x.mode = +network.802_1x.identity = +network.802_1x.md5_password = +network.802_1x.root_cert_url = +network.802_1x.client_cert_url = + +##It configure the mouth of the PC 802.1 x - logoff function.It takes effect after a reboot. +##The default value is 0-Dsable , 1-Enable +network.802_1x.proxy_eap_logoff.enable = +####################################################################################### +## OpenVPN(Except T19P Model) ## +####################################################################################### +network.vpn_enable = +openvpn.url = + +####################################################################################### +## LLDP ## +####################################################################################### +network.lldp.enable = +network.lldp.packet_interval = + +####################################################################################### +## CDP ## +####################################################################################### +network.cdp.enable = +network.cdp.packet_interval = + +####################################################################################### +## Span to PC ## +####################################################################################### +network.span_to_pc_port = + +####################################################################################### +## RTP Port ## +####################################################################################### +##It configures the maximum local RTP port. +##The default value is 11800.It takes effect after a reboot.Integer from 1024 to 65535 +network.port.max_rtpport = + +##It configures the maximum local RTP port. +##The default value is 11780.It takes effect after a reboot.Integer from 1024 to 65535 +network.port.min_rtpport = + +####################################################################################### +## Syslog ## +####################################################################################### +syslog.mode = + +##It configures the IP address or domain name of the syslog server when exporting log to the syslog server. +##It takes effect only if the parameter syslog.mode is configured as Server. +##The default value is blank.It takes effect after a reboot. +syslog.server = + +##It configures the detail level of syslog information to be exported.0 means nothing and 6 means all. +##The default value is 3.It takes effect after a reboot.Integer from 0 to 6 +syslog.log_level = + +####################################################################################### +## TR069(Except T41P/T42G Models) ## +####################################################################################### +managementserver.enable = +managementserver.username = +managementserver.password = +managementserver.url = +managementserver.connection_request_username = +managementserver.connection_request_password = +managementserver.periodic_inform_enable = +managementserver.periodic_inform_interval = + +####################################################################################### +## Autoprovision ## ## +####################################################################################### +### It enables or disables the phone to synchronize personalized configuration settings with the auto provisioning server. +### If it is set to 1 (Enabled), personalized configuration settings via web/phone user interface are saved in the MAC-local.cfg file on the phone, +### and then the phone will upload the MAC-local.cfg file to the provisioning server. During auto provisioning, the phone requests to download the MAC-local.cfg file on the provisioning server. +### 0-Disabled, 1-Enabled. The default value is 0. +auto_provision.custom.sync = + +### It enables or disables the phone to protect personalized configuration settings even after auto provisioning. +### If it is set to 1 (Enabled), personalized configuration settings via web/phone user interface will be protected and remained after auto provisioning. +### 0-Disabled, 1-Enabled. The default value is 0. +auto_provision.custom.protect = + +auto_provision.custom.upload_method= + +####################################################################################### +## Autop Mode ## +####################################################################################### +auto_provision.power_on = + +####################################################################################### +## Autop PNP ## +####################################################################################### +auto_provision.pnp_enable = + +####################################################################################### +## Autop DHCP ## +####################################################################################### +auto_provision.dhcp_option.enable = +auto_provision.dhcp_option.list_user_options = + +####################################################################################### +## Autop Repeat ## +####################################################################################### +auto_provision.repeat.enable = +auto_provision.repeat.minutes = + +####################################################################################### +## Autop Weekly ## +####################################################################################### +auto_provision.weekly.enable = +auto_provision.weekly.dayofweek = +auto_provision.weekly.begin_time = +auto_provision.weekly.end_time = + +####################################################################################### +## Autop URL ## +####################################################################################### +auto_provision.server.url = +auto_provision.server.username = +auto_provision.server.password = + +####################################################################################### +## Autop AES Key ## +####################################################################################### +##It configures the AES key for decrypting the Common CFG file. The valid characters contain: 0 ~ 9, A ~ Z, a ~ z. +##The default value is blank. +auto_provision.aes_key_16.com = + +##It configures the AES key for decrypting the MAC-Oriented CFG file. The valid characters contain: 0 ~ 9, A ~ Z, a ~ z. +##The default value is blank. +auto_provision.aes_key_16.mac = + +auto_provision.aes_key_in_file = + +##It configures the access URL of the custom MAC-Oriented CFG file. +##The default value is blank. +custom_mac_cfg.url = + +##It configures the value (vendor name of the device) of DHCP option 60. +##The default value is yealink. +auto_provision.dhcp_option.option60_value = + + + +####################################################################################### +## Autop wildcard ## +####################################################################################### + +auto_provision.url_wildcard.pn = + +####################################################################################### +## Autop Code ## +####################################################################################### +##It configures the name of the code for triggering auto provisioning. +##The default value is blank.It takes effect after a reboot. +autoprovision.1.name = + +##It configures the code for triggering auto provisioning. +##Valid characters are digits, # and *.Example:autoprovision.1.code = *99The default value is blank. +##It takes effect after a reboot. +autoprovision.1.code = + +##It configures the access URL of auto provisioning server.The default value is blank. +##It takes effect after a reboot. +autoprovision.1.url = + +##It configures the user name for authentication during auto provisioning. +##The default value is blank.It takes effect after a reboot. +autoprovision.1.user = + +##It configures the password for authentication during auto provisioning. +##The default value is blank.It takes effect after a reboot. +autoprovision.1.password = + +##It configures the AES key for decrypting the Common CFG file. +##The default value is blank.It takes effect after a reboot. +autoprovision.1.com_aes = + +##It configures the AES key for decrypting the MAC-Oriented CFG file. +##The default value is blank.It takes effect after a reboot. +autoprovision.1.mac_aes = + +####################################################################################### +## Watch Dog ## +####################################################################################### +watch_dog.enable = + +####################################################################################### +## SIP Advanced ## +####################################################################################### +sip.use_23_as_pound = +sip.rfc2543_hold = +sip.use_out_bound_in_dialog = +sip.reg_surge_prevention = +sip.send_response_by_request = +sip.notify_reboot_enable = +sip.disp_incall_to_info = +sip.limit_server_name = +sip.limit_server_reason = +sip.listen_port = +sip.tls_listen_port = +sip.trust_ctrl = +sip.nat_stun.enable = +sip.nat_stun.server = +sip.nat_stun.port = +sip.timer_t1 = +sip.timer_t2 = +sip.timer_t4 = +custom.features.redial_via_local_sip_server.enable = + + +##It is XSI authentication mode.0-Disable 1-Enable (Except T19P/T21P Models) +sip.authentication_for_xsi = +##It is DSS KEY to call park type, whether the trigger BLF function.It takes effect after a reboot. +##The default value is 0-Disable(DSS KEY to call park type,triggering BLF function) 1-Enable +sip.call_park_without_blf = +##It is ASCII conversion into corresponding symbols. +##The defalult value is blank. 0-Disable 1-Enable +sip.escape_characters.enable = +##The default value is 0 ( said according to the transmission mode configured to listen on port),1- +##1-said at the same time to monitor TCP and UDP +##2-said to monitor TCP and UDP at the same time, and from the BLF - the LIST to subscribe to the contact with a transport = TCP parameters +sip.listen_mode = +##The default value is 0-Disable, 1-Enable.It takes effect after a reboot. +##0-registered according to the uri of the tectonic refer - by domain +##1-according to refer the from header fields to construct refer - by domain + +sip.refer_by_header_auto_build = +##The default is blank.The Valid characters are digits - _.! ~ * # '() & Q462 = + R452 $,;?/ \ 0 +##It is username needs to be preserved in a special notation. +sip.reserve_characters = +##The default value is 0.(contracting out the random contact, via port to carry fixed port).It takes effect after a reboot. +##1-the out-contracting port random contact, via port to carry +##2-the out-contracting ports fixed contact, via carry fix +sip.tcp_port_random_mode = + + +####################################################################################### +## Echo Cancellation ## +####################################################################################### +voice.vad = +voice.cng = +voice.echo_cancellation = +voice.call_preview_mode = + +####################################################################################### +## Jitter Buffer ## +####################################################################################### +voice.jib.adaptive = +voice.jib.min = +voice.jib.max = +voice.jib.normal = + +####################################################################################### +## Tones ## +####################################################################################### +voice.tone.country = +voice.tone.dial = +voice.tone.ring = +voice.tone.busy = +voice.tone.congestion = +voice.tone.callwaiting = +voice.tone.dialrecall = +voice.tone.info = +voice.tone.stutter = +voice.tone.autoanswer = +voice.tone.message = + +####################################################################################### +## Volume ## +####################################################################################### +voice.handfree.spk_vol = +voice.handfree.tone_vol = +voice.handset.spk_vol = +voice.handset.tone_vol = +voice.headset.spk_vol = +voice.headset.tone_vol = +voice.ring_vol= +voice.group_spk_vol = + +### Only T28P/T26P/T22P/T20P Models support the three parameters +voice.handfree_send = +voice.handset_send = +voice.headset_send = + +####################################################################################### +## Transfer ## +####################################################################################### +##It enables or disables the transferee partys phone to prompt a missed call on the LCD screen before displaying +##the caller ID when performing a semi-attended transfer.0-Enabled,1-Disabled +##The default value is 1. +transfer.semi_attend_tran_enable = + +##It enables or disables the phone to complete the blind transfer through on-hook.0-Disabled,1-Enabled . +##The default value is 1. +transfer.blind_tran_on_hook_enable = + +##It enables or disables the phone to transfer call to the two parties after a local conference call hangs up. +##0-Disabled,1-Enabled. +##The default value is 0. +transfer.tran_others_after_conf_enable = + +##It enables or disables the phone to complete the attended transfer through on-hook. +##0-Disabled,1-Enabled. +##The default value is 1. +transfer.on_hook_trans_enable = + +##It configures the DSS key behavior during an active call when user presses the DSS +##key and the DSS key is configured as a speed dial, transfer or BLF/BLF list key. +##0-New Call,1-Attended Transfer,2-Blind Transfer. +##The default value is 2. +transfer.dsskey_deal_type = + +###Except T20P/T41P/T42G/T46G Models +##It enables or disables the phone to enter Transfer to menu during multiple calls when pressing the transfer soft key or TRAN key. +##0-Disabled,1-Enabled. +##The default value is 1. +transfer.multi_call_trans_enable = + +####################################################################################### +## Language Settings ## +####################################################################################### +##It configures the language of the web user interface. +##Chinese_S is only applicable to SIP-T19P, SIP-T21P and SIP-T46G IP phones. +##Chinese_T is only applicable to SIP-T46G IP phones. +##French, Portuguese and Spanish are not applicable to SIP-T19P and SIP-T21P IP phones. +lang.wui = + +##It configures the language of the phone user interface. +##Chinese_S and Chinese_T are only applicable to SIP-T19P, SIP-T21P and SIP-T46G IP phones. +##The default value is English. +lang.gui = + +gui_lang.url = +gui_lang.delete = +##Except T19P/T21P Models +wui_lang.url = +wui_lang_note.url = +wui_lang.delete = + +####################################################################################### +## Auto Redial ## +####################################################################################### +auto_redial.enable = +auto_redial.interval = +auto_redial.times = + +####################################################################################### +## Zero Touch ## +####################################################################################### +zero_touch.enable = +zero_touch.wait_time = +zero_touch.network_fail_wait_times = +zero_touch.network_fail_delay_times = + +####################################################################################### +## Push XML ## +####################################################################################### +push_xml.server = +push_xml.block_in_calling= +push_xml.sip_notify= + +####################################################################################### +## Dial Plan ## +####################################################################################### +dialplan.area_code.code = +dialplan.area_code.min_len = +dialplan.area_code.max_len = +dialplan.area_code.line_id = + +### X ranges from 1 to 10 +###dialplan.block_out.number.x = +###dialplan.block_out.line_id.x = + +dialplan.block_out.number.1 = +dialplan.block_out.line_id.1 = + +###X ranges from 1 to 100 +###dialplan.dialnow.rule.X = +###dialplan.dialnow.line_id.X = + +dialplan.dialnow.rule.1 = +dialplan.dialnow.line_id.1 = + +###X ranges from 1 to 100 +###dialplan.replace.prefix.X = +###dialplan.replace.replace.X = +###dialplan.replace.line_id.X = + +dialplan.replace.prefix.1 = +dialplan.replace.replace.1 = +dialplan.replace.line_id.1 = + +dialplan_dialnow.url = +phone_setting.dialnow_delay = +dialplan_replace_rule.url = + + +####################################################################################### +## Remote Phonebook(Except T20P Model) ## +####################################################################################### +###X ranges from 1 to 5 +###remote_phonebook.data.X.url = +###remote_phonebook.data.X.name = + +remote_phonebook.data.1.url = +remote_phonebook.data.1.name = + +###Except T41P/T42G Models +remote_phonebook.display_name = + +###It enables or disables the phone to update the data of the remote phone book at a time when accessing the remote phone book. +###0-Disabled, 1-Enabled. The default value is 0.(Except T19P/T21P Models) +features.remote_phonebook.enter_update_enable = + +##It enables or disables the phone to perform a remote phone book search when receiving an incoming call. +##0-Disabled,1-Enabled. +##The default value is 0. +features.remote_phonebook.enable = + +##It configures the interval (in seconds) for the phone to update the data of the remote phone book from the remote phone book server. +##The value 0 means the phone will not regularly update the data of the remote phone book from the remote phone book server. +##The default value is 21600.Integer from 3600 to 2592000,and 0. +features.remote_phonebook.flash_time = + +####################################################################################### +## LDAP(Except T19P/T20P Models) ## +####################################################################################### +##It enables or disables LDAP feature.0-Disabled,1-Enabled. +##The default value is 0. +ldap.enable = + +##It configures the criteria for searching the contact name attributes. +##Example:ldap.name_filter = (|(cn=%)(sn=%)). +##The default value is blank. +ldap.name_filter = + +##It configures the criteria for searching the contact number attributes. +##Example:ldap.number_filter = (|(telephoneNumber=%)(mobile=%)(ipPhone=%)) +##The default value is blank. +ldap.number_filter = + +##It configures the IP address or domain name of the LDAP server. +##The default value is blank. +ldap.host = + +##It configures the port of the LDAP server. +##The default value is 389.Integer from 1 to 65535. +ldap.port = + +##It configures the LDAP search base which corresponds to the location of the LDAP phonebook. +##Example:ldap.base = dc=yealink,dc=cn. +##The default value is blank. +ldap.base = + +##It configures the user name for accessing the LDAP server. +##The default value is blank. +ldap.user = + +##It configures the password for accessing the LDAP server. +##The default value is blank. +ldap.password = + +##It configures the maximum of the search results returned by the LDAP server to be displayed. +##The default value is 50.Integer from 1 to 32000. +ldap.max_hits = + +##It configures the name attributes of each record to be returned by the LDAP server. +##Multiple attributes are separated by spaces.Example:ldap.name_attr =sn cn. +##The default value is blank. +ldap.name_attr = + +##It configures the number attributes of each record to be returned by the LDAP server. +##Multiple attributes are separated by spaces.Example:ldap.numb_attr = Mobile ipPhone. +##The default value is blank. +ldap.numb_attr = + +##It configures the display name of the contact record displayed on the LCD screen. The value of this parameter must start with % symbol. +##Example:ldap.display_name = %cn +##The default value is blank. +ldap.display_name = + +##It configures the LDAP version. +##The default value is 3. +ldap.version = + +##It enables or disables the phone to perform an LDAP search when receiving an incoming call. +##0-Disabled,1-Enabled. +##The default value is 0. +ldap.call_in_lookup = + +##It enables or disables the phone to sort the search results in alphabetical order or numerical order. +##0-Disabled,1-Enabled. +##The default value is 0. +ldap.ldap_sort = +##It is the electricity + start, automatic search + 00 the beginning and the beginning of the numbe +##The default value is 0.(0-Disable,1-Enable )(Except T19P/T21P Models) +ldap.incoming_call_special_search.enable = +##The default value is 0,value of 0 to 2, respectively the ldap, ldap + StarTLS and ldaps +ldap.tls_mode = +ldap.call_out_lookup = + +####################################################################################### +## Features ## +####################################################################################### +features.normal_refuse_code = +features.auto_answer_delay = +features.allow_mute = +features.group_listen_in_talking_enable = +features.call_completion_enable = +features.call_num_filter = +features.direct_ip_call_enable = +features.relog_offtime = +features.ringer_device.is_use_headset = +features.factory_pwd_enable = +features.anonymous_response_code = +features.export_cfg_erase_pwd = +features.show_action_uri_option = +features.reset_by_long_press_enable = +features.show_anywhere_remote_office_enable = +features.upload_server = +features.call_log_show_num = +features.ldap.input_type = +features.call_invite_format = +action_url.show_msgbox = +phone_setting.logon_wizard_forever_wait = +features.call_invite_format = +features.transfer_type = +features.caller_name_type_on_dialing = +phone_setting.unregister_account_block_out.enable= +gui_input_method.delete = +features.off_hook_answer.enable = + + + +##Only for T46G Models support this parameter +features.block_linekey_in_menu.enable = + +features.shorten_linekey_label.enable = +features.dsskey_blind_tran = +features.special_auto_answer_tone = +features.blf_pickup_only_send_code = +features.display_method_on_dialing = + + +##It is configured in the middle of the screen shows the current default at the bottom of the account name. +##The default is 0.CNT version 1. +features.show_default_account= + +## Except T4X Models support this +features.reboot_in_talk_enable = + +## Except T19P/T21P Models support this +features.barge_in_via_username.enable = + +features.flash_url_dsskey_led.enable = +features.default_account = +features.forward_call_popup.enable = +features.linekey_call_with_default_account = +features.missed_call_popup.enable = +features.text_message_popup.enable = +features.voice_mail_popup.enable = +features.hide_feature_access_codes.enable = + +## Except T19P/T21P/T4X Models support this +features.hide_caller_id.enable = + +## Only for T4X Models support this parameter +features.hide_zero_touch_url.enable = + +## Only T46G Models support this parameter +features.config_dsskey_length = + + + +####################################################################################### +## Features Forward ## +####################################################################################### + +###Except T19P Model +features.fwd_mode = + +features.fwd_diversion_enable = + +####################################################################################### +## Features DND ## +####################################################################################### + +###Except T19P Model +features.dnd_mode = + +features.dnd.enable = +features.dnd.on_code = +features.dnd.off_code = +features.dnd_refuse_code = +features.dnd.emergency_enable = +features.dnd.emergency_authorized_number = + +####################################################################################### +## Features Bluetooth(Only for T46G model) ## +####################################################################################### +features.bluetooth_enable = + +####################################################################################### +## Features BLF ## +####################################################################################### +##It configures BLF LED mode and provides four kinds of definition for the BLF/BLF list key LED status. +##For more information, refer to BLF LED Mode on page 218. +##The default value is 0. +features.blf_led_mode = + +##It enables or disables the phone to deal with the Version header in the BLF NOTIFY message sent by the server. +##0-Disabled,1-Enabled. +##The default value is 0.It takes effect after a reboot. +features.blf_list_version = + +####################################################################################### +## Features Intercom ## +####################################################################################### +features.intercom.allow = +features.intercom.mute = +features.intercom.tone = +features.intercom.barge = + +####################################################################################### +## Features Hotline ## +####################################################################################### +##It configures the hotline number. +##The default value is blank. +features.hotline_number = + +##It configures the delay time (in seconds) for the phone to dial out the hotline number automatically. +##The default value of delay time is 4.Integer from 0 to 10 +features.hotline_delay = + +####################################################################################### +## Features DTMF ## +####################################################################################### +features.dtmf.hide = + +###Except T20P Model +features.dtmf.hide_delay = + +features.dtmf.repetition = +features.dtmf.transfer = +features.dtmf.replace_tran = +features.dtmf.duration = +features.dtmf.volume = + +####################################################################################### +## Features Audio Settings ## +####################################################################################### +features.headset_prior = + +###Except T19P/T21P Models +features.headset_training = +features.alert_info_tone = +features.busy_tone_delay = +features.send_pound_key = +features.key_as_send = +features.send_key_tone = +features.key_tone = +features.play_hold_tone.enable = +features.play_hold_tone.delay = +features.redial_tone = +features.partition_tone = + +####################################################################################### +## Features Action URI ## +####################################################################################### +features.action_uri_limit_ip = + + +####################################################################################### +## Features Prefix ## +####################################################################################### +features.password_dial.enable = +features.password_dial.prefix = +features.password_dial.length = + +####################################################################################### +## Features History ## +####################################################################################### +features.save_call_history = + +####################################################################################### +## Notification Popups ## +####################################################################################### +features.voice_mail_popup.enable= +features.missed_call_popup.enable= +features.forward_call_popup.enable= +features.text_message_popup.enable= + +####################################################################################### +## Ringtone ## +####################################################################################### +ringtone.url = +ringtone.delete = + +####################################################################################### +## Phone Settings ## +####################################################################################### +phone_setting.inter_digit_time = +phone_setting.ring_type = + +phone_setting.ring_for_tranfailed = +phone_setting.is_deal180 = +phone_setting.show_code403 = +phone_setting.label_scroll_interval_time = + + +###Only T41P/T42G/T46G Models support this parameter +phone_setting.page_tip = + +phone_setting.predial_autodial = +phone_setting.headsetkey_mode = +features.voice_mail_tone_enable = +##Except T19P/T21P Models support this parameter +phone_setting.reserve_certs_enable = +phone_setting.called_party_info_display.enable = + +phone_setting.call_info_display_method = +## Only for T4X Models support this parameter + + + +####################################################################################### +## Power Led Settings ## +####################################################################################### +phone_setting.common_power_led_enable = +phone_setting.talk_and_dial_power_led_enable = +phone_setting.mail_power_led_flash_enable = +phone_setting.ring_power_led_flash_enable = +phone_setting.mute_power_led_flash_enable= +phone_setting.hold_and_held_power_led_flash_enable = + +##It configures the level of the active backlight intensity. +##For SIP-T28P IP phones and the connected EXP39: +##The default value is 2. +##For SIP-T46G IP phones and the connected EXP40: +##The default value is 8. +phone_setting.active_backlight_level = + +##It configures the phone to go out or reduce intensity of the backlight on the LCD screen after a period of inactivity. +##0-Off,1-Low. +##The default value is 1. +phone_setting.inactive_backlight_level = + +####################################################################################### +## Phone Setting Display ## +####################################################################################### + +###Except T20P/T19P/T21P Models +##It configures the backlight time (in seconds).0, 1, 15, 30, 60, 120, 300, 600 or 1800. +phone_setting.backlight_time = + +###Except T20P/T22P/T41P/T42G Models +###It configures the contrast of the LCD screen. +###For SIP-T19P and SIP-T21P IP phones, it configures the LCDs contrast of the phone only. +###For SIP-T26P IP phones, it configures the LCDs contrast of the connected EXP39 only. +###For SIP-T28P IP phones, it configures the LCDs contrast of the IP phone and the connected EXP39. +###For SIP-T46G IP phones, it configures the LCDs contrast of the connected EXP40 only. +###The default value is 6. +phone_setting.contrast = + +###Except T46G Model +##It configures the logo mode of the LCD screen (except for SIP-T20P IP phones). +##For SIP-T19P/T21P/T22P/T26P/T41P/T42G IP phones: +##0-Disabled 1-System logo 2-Custom logo +##The default value is 0. +##For SIP-T28P IP phones: +##1-System logo 2-Custom logo +##The default value is 1. +##It enables or disables a text logo (for SIP-T20P IP phones). +##0-Disabled 1-Enabled +##The default value is 0. +phone_setting.lcd_logo.mode = + +###Only T20P Model supports this parameter +##It configures a text logo. +##The default value is Yealink. +phone_setting.lcd_logo.text = + +###Except T20P/T46G Models +lcd_logo.url = +lcd_logo.delete = + +###Only T46G Model supports the two parameters +###It configures the wallpaper displayed on the phone. +###Example:To configure a phone built-in picture (e.g., 1.png) to be wallpaper, the value format is: +###phone_setting.backgrounds = Resource:1.png +###To configure a custom picture (e.g., custom1.png) to be wallpaper, the value format is: Config:custom1.png +###The default value is Resource:Default.jpg. +phone_setting.backgrounds = + +wallpaper_upload.url = + +####################################################################################### +## Phone Setting BLF ## +####################################################################################### +###It enables or disables the phone to automatically configure the BLF list keys in order. +###0-Disabled,1-Enabled. +###The default value is 1. + +phone_setting.auto_blf_list_enable = + +###Only T26P/T28P/T46G Models support the parameter +###It configures the order of BLF list keys assigned automatically. +###0-Line Keys->Memory Keys->Extension Keys +###1-Extension Keys->Memory Keys->Line Keys +###Memory keys are not applicable to SIP-T46G IP phones. +###The default value is 0. +phone_setting.blf_list_sequence_type = + +####################################################################################### +## Key Lock ## +####################################################################################### +##Except T41P/T42G/T46G Models +phone_setting.lock = + +###Only T41P/T42G/T46G Models support the two parameters +###It enables or disables keypad lock feature. +###0-Disabled,1-Enabled. +###The default value is 0. +phone_setting.phone_lock.enable = + +###It configures the keypad lock type. +###0-All Keys,1-Function Keys,2-Menu Key. +###The default value is 0. +phone_setting.phone_lock.lock_key_type = + +###It configures the password for unlocking the keypad. +###The default value is 123. +phone_setting.phone_lock.unlock_pin = + +###It configures the interval (in seconds) to automatically lock the keypad. +###The default value is 0 (the keypad is locked only by long pressing the pound key or pressing the keypad lock key) +phone_setting.phone_lock.lock_time_out = +phone_setting.emergency.number = + +####################################################################################### +## Multicast ## +####################################################################################### + +###Except T19P Model +multicast.codec = + +multicast.receive_priority.enable = +multicast.receive_priority.priority = + +###X ranges from 1 to 10 +###multicast.listen_address.X.label = +###multicast.listen_address.X.ip_address = + +multicast.listen_address.X.label = +multicast.listen_address.X.ip_address = +###Except T19P/T21P Models support this parameter (X:1-10) + +multicast.paging_address.X.ip_address = +multicast.paging_address.X.label = +####################################################################################### +## Super Search(Except T20P Model) ## +####################################################################################### +super_search.recent_call = +super_search.url = + +####################################################################################### +## Security ## +####################################################################################### +###Define the login username and password of the user, var and administrator. +###If you change the username of the administrator from "admin" to "admin1", your new administrator's username should be configured as: security.user_name.admin = admin1. +###If you change the password of the administrator from "admin" to "admin1pwd", your new administrator's password should be configured as: security.user_password = admin1:admin1pwd. + +###The following examples change the user's username to "user23" and the user's password to "user23pwd". +###security.user_name.user = user23 +###security.user_password = user23:user23pwd +###The following examples change the var's username to "var55" and the var's password to "var55pwd". +###security.user_name.var = var55 +###security.user_password = var55:var55pwd +security.user_name.user = +security.user_name.admin = +security.user_name.var = +security.user_password = + +###It enables or disables the phone to only accept the certificates in the Trusted Certificates list. +###0-Disabled,1-Enabled. +###The default value is 1.It takes effect after a reboot. +security.trust_certificates = + +###It configures the source certificates for the phone to authenticate for TLS connection. +###0-Default certificates,1-Custom certificates,2-All certificates. +###The default value is 0.It takes effect after a reboot. +security.ca_cert = + +###It configures the device certificates for the phone to send for TLS authentication. +###0-Default certificates,1-Custom certificates. +###The default value is 0.It takes effect after a reboot. +security.dev_cert = + +###It enables or disables the phone to mandatorily validate the CommonName or SubjectAltName of the certificate received from the connecting server. +###0-Disabled,1-Enabled. +###The default value is 0.It takes effect after a reboot. +security.cn_validation = + +security.trust_custom_certificates = + +####################################################################################### +## User Mode ## +####################################################################################### +###It enables or disables the 3-level permissions (admin, user, var). +###0-Disabled,1-Enabled. +###The default value is 0.It takes effect after a reboot. +security.var_enable = + +web_item_level.url = + +####################################################################################### +## Trusted Certificates ## +####################################################################################### +trusted_certificates.url = +trusted_certificates.delete = + +####################################################################################### +## Server Certificates ## +####################################################################################### +server_certificates.url = +server_certificates.delete = + +####################################################################################### +## Memory Key(Only for T26P/T28P Models) ## +####################################################################################### +###T26P/T28P X ranges from 1 to 10 + +#memorykey.X.type--Customize the Memorykey type. +#The valid types are: + +#0-NA 1-Conference 2-Forward 3-Transfer 4-Hold 5-DND 7-Call Return 8-SMS 9-Directed Pickup 10-Call Park 11-DTMF 12-Voice Mail 13-Speed Dial 14-Intercom +#15-Line 16-BLF 17-URL 18-Group Listening 20-Private Hold 22-XML Group 23-Group Pickup 24-Multicast Paging 25-Record 27-XML Browser +#34-Hot Desking 35-URL Record 38-LDAP 39-BLF List 40-Prefix 41-Zero Touch 42-ACD 45-Local Group 46-Network Group 49-Custom Button +#50-Keypad Lock 55-Meet-Me Conference 56-Retrieve Park 57-Hoteling 58-ACD Grace 59-Sisp Code 60-Emergency 61-Directory + +###memorykey.X.line = +###memorykey.X.value = +###memorykey.X.pickup_value = +###memorykey.X.type = +###memorykey.X.xml_phonebook = + +###It configures the desired line to apply the key feature. +###The default value is 1.Integer from 1 to 6 +memorykey.1.line = + +###It configures the value of the memory key feature. +###For example, when set the key feature to BLF, it configures the number of the monitored user. +###The default value is blank. +memorykey.1.value = + +###It configures the pickup code for BLF feature or conference ID followed by the # sign for Meet-Me conference feature. +###It only applies to BLF and Meet-Me conference features. +###The default value is blank. +memorykey.1.pickup_value = + +###It configures the desired feature for memory key X. +###The default value is 0. +memorykey.1.type = + +###It configures the desired local group/XML group/network group for the memory key X. +###It only applies to the Local Group, XML Group and Network Group features. +###The default value is 0. +memorykey.1.xml_phonebook = + +####################################################################################### +## Line Key ## +####################################################################################### +###Except T19D Model +###T21D/T20P X ranges from 1 to 2 +###T22P/T26P X ranges from 1 to 3 +###T28P X ranges from 1 to 6 +###T41P/T42G X ranges from 1 to 15 +###T46G X ranges from 1 to 27 + +#linekey.X.type--Customize the linekey type. +#The valid types are: + +#0-NA 1-Conference 2-Forward 3-Transfer 4-Hold 5-DND 7-Call Return 8-SMS 9-Directed Pickup 10-Call Park 11-DTMF 12-Voice Mail 13-Speed Dial +#14-Intercom 15-Line 16-BLF 17-URL 18-Group Listening 20-Private Hold 22-XML Group 23-Group Pickup 24-Multicast Paging 25-Record 27-XML Browser +#34-Hot Desking 35-URL Record 38-LDAP 39-BLF List 40-Prefix 41-Zero Touch 42-ACD 45-Local Group 46-Network Group 49-Custom Button 50-Keypad Lock +#55-Meet-Me Conference 56-Retrieve Park 57-Hoteling 58-ACD Grace 59-Sisp Code 60-Emergency 61-Directory + +#0-NA Only for T41/T42/T46) +#22-XML Group (Not support T20) +#38-LDAP (Not support T20) +#46-Network Group (Not support T20) +#8-SMS (Only support T21/T46/T22/T26/T28) +#17-URL (Only support T41/T42/T46) +#49-Custom Button (Only support T20/T22/T26/T28) + +###linekey.X.line = +###linekey.X.value = +###linekey.X.pickup_value = +###linekey.X.type = +###linekey.X.xml_phonebook = +###linekey.X.label = + +###It configures the desired line to apply the key feature.Integer from 1 to 6 +linekey.1.line = + +###It configures the value of the line key feature. +###For example, when setting the key feature to BLF, it configures the number of the monitored user. +###The default value is blank. +linekey.1.value = + +###It configures the pickup code for BLF feature or conference ID followed by the # sign for Meet-Me conference feature. +###It only applies to BLF and Meet-Me conference features. +###The default value is blank. +linekey.1.pickup_value = + +###It configures the key feature for the line key X. +linekey.1.type = + +###It configures the desired local group/XML group/network group for the line key X. +###It only applies to the Local Group, XML Group and Network Group features. +###XML Group and Network Group features are not applicable to SIP-T20P IP phones. +linekey.1.xml_phonebook = + +###It configures the label displayed on the LCD screen for each line key. +###The default value is blank. +linekey.1.label = + +####################################################################################### +## Programable Key ## +####################################################################################### +###T20P X ranges from 1 to 9 +###T28P/T26P X ranges from 1 to 14 +###T41P/T42G/T19P/T21P X ranges from 1 to 11 +###T46G/T22P X ranges from 1 to 13 + +#programablekey.x.type--Customize the programmable key type. +#The valid types are: +#0-NA 2-Forward 5-DND 7-Call Return 8-SMS 9-Directed Pickup 13-Speed Dial +#22-XML Group 23-Group Pickup 27-XML Browser 28-History 30-Menu 31-Switch Account 32-New SMS +#33-Status 34-Hot Desking 38-LDAP 40-Prefix 41-Zero Touch 43-Local Directory 44-Network Directory 45-Local Group +#46-Network Group 47-XML Directory 50-Keypad Lock 51-Switch Account Up 52-Switch Account Down 55-Meet-Me Conference 61-Directory + +#40-Prefix (Not support T20) +#22-XML Group (Not support T20) +#31-Switch Account (Not support T19/T41/T42/T46) +#38-LDAP (Not support T19/T20) +#46-Network Group (Not support T20) +#8-SMS (Not support T41/T42/T20) +#32-New SMS (Not support T41/T42/T20) +#47-XML Directory (Not support T20) +#44-Network Directory (Not support T20) +#41-Zero Touch (Not support T41/T42/T46) +#34-Hot Desking (Only support T19/T46 +#51-Switch Account Up (Only support T41/T42/T46) +#52-Switch Account Down (Only support T41/T42/T46) + +###programablekey.X.type = +###programablekey.X.line = +###programablekey.X.value = +###programablekey.X.xml_phonebook = +###programablekey.X.history_type = +###programablekey.X.label = +###programablekey.X.pickup_value = + +###It configures the key feature for the programmable key X. +programablekey.1.type = + +###It configures the desired line to apply the programmable key feature. +programablekey.1.line = + +###It configures the value of the programmable key feature. +###For example, when configuring the key feature to be Speed Dial, it configures the number. +###The default value is blank. +programablekey.1.value = + +###It configures the desired local group/XML group/network group for the programmable key. +###It only applies to the Local Group, XML Group and Network Group features. +###XML Group and Network Group features are not applicable to SIP-T20P IP phones. +programablekey.1.xml_phonebook = + +###It configures the history type of programmable key. +###0-Local History,1-Network History. +###The default value is 0. +programablekey.1.history_type = + +###It configures the label displayed on the LCD screen for each soft key. +###The default value is blank. +programablekey.1.label = + +###It configures conference ID followed by the # sign for Meet-Me conference feature. +###It only applies to Meet-Me conference feature. +###The default value is blank. +programablekey.1.pickup_value = + +####################################################################################### +## Expansion Key(Only for T26P/T28P/T46G Models) ## +####################################################################################### +###T46G/T28P/T26P X ranges from 1 to 6, Y ranges from 1 to 40 + +###expansion_module.X.key.Y.type = +###expansion_module.X.key.Y.line = +###expansion_module.X.key.Y.value = +###expansion_module.X.key.Y.pickup_value = +###expansion_module.X.key.Y.label = +###expansion_module.X.key.Y.xml_phonebook = + +###It configures the key feature of the expansion module X key Y. +expansion_module.1.key.1.type = + +###It configures the desired line to apply the expansion module key feature.Integer from 1 to 6 +expansion_module.1.key.1.line = + +###It configures the value of the expansion module key feature. +###The default value is blank. +expansion_module.1.key.1.value = + +###It configures the pickup code for BLF feature or conference ID followed by the # sign for Meet-Me conference feature. +###It only applies to BLF and Meet-Me conference features. +###The default value is blank. +expansion_module.1.key.1.pickup_value = + +###It configures the label displayed on the LCD screen of the expansion module for each key. +###The default value is blank. +expansion_module.1.key.1.label = + +###It only applies to the Local Group, XML Group and Network Group features.Integer from 0 to 48. +expansion_module.1.key.1.xml_phonebook = + +####################################################################################### +## Forward Always ## +####################################################################################### +forward.always.enable = +forward.always.target = +forward.always.on_code = +forward.always.off_code = + +####################################################################################### +## Forward Busy ## +####################################################################################### +forward.busy.enable = +forward.busy.target = +forward.busy.on_code = +forward.busy.off_code = + +####################################################################################### +## Forward No Answer ## +####################################################################################### +forward.no_answer.enable = +forward.no_answer.target = +forward.no_answer.timeout = +forward.no_answer.on_code = +forward.no_answer.off_code = + +####################################################################################### +## Forward International ## +####################################################################################### +###It enables or disables the phone to forward incoming calls to international numbers. +###0-Disabled,1-Enabled. +###The default value is 1. +forward.international.enable = + +####################################################################################### +## ACD ## +####################################################################################### +acd.auto_available = +acd.auto_available_timer = + +####################################################################################### +## Hotdesking Startup ## +####################################################################################### +phone_setting.logon_wizard = +##The default value is 1.Except T19P/T21P +features.auto_exit_logon_wizard.enable = +############## +hotdesking.startup_register_name_enable = +hotdesking.startup_username_enable = +hotdesking.startup_password_enable = +hotdesking.startup_sip_server_enable = +hotdesking.startup_outbound_enable = + +####################################################################################### +## Hotdesking Dsskey ## +####################################################################################### +hotdesking.dsskey_register_name_enable = +hotdesking.dsskey_username_enable = +hotdesking.dsskey_password_enable = +hotdesking.dsskey_sip_server_enable = +hotdesking.dsskey_outbound_enable = + +####################################################################################### +## Alert Info ## +####################################################################################### +###X ranges from 1 to 100 +###distinctive_ring_tones.alert_info.x.text = +###distinctive_ring_tones.alert_info.x.ringer = + +###It configures the internal ringer text for distinctive ringtone. +###Example: distinctive_ring_tones.alert_info.1.text = Family +###The default value is blank. +distinctive_ring_tones.alert_info.1.text = + +###It configures the desired ring tones for each text. +###The value ranges from 1 to 8, the digit stands for the appropriate ringtone. +###Ring tones 6-8 are only applicable to SIP-T46G IP phones. +###The default value is 1. +distinctive_ring_tones.alert_info.1.ringer = + +####################################################################################### +## Call Waiting ## +####################################################################################### +call_waiting.enable = +call_waiting.tone = +call_waiting.on_code = +call_waiting.off_code = + +####################################################################################### +## Action URL ## +####################################################################################### +action_url.setup_completed = +action_url.registered = +action_url.unregistered = +action_url.register_failed = +action_url.off_hook = +action_url.on_hook = +action_url.incoming_call = +action_url.outgoing_call = +action_url.call_established = +action_url.dnd_on = +action_url.dnd_off = +action_url.always_fwd_on = +action_url.always_fwd_off = +action_url.busy_fwd_on = +action_url.busy_fwd_off = +action_url.no_answer_fwd_on = +action_url.no_answer_fwd_off = +action_url.transfer_call = +action_url.blind_transfer_call = +action_url.attended_transfer_call = +action_url.hold = +action_url.unhold = +action_url.mute = +action_url.unmute = +action_url.missed_call = +action_url.call_terminated = +action_url.busy_to_idle = +action_url.idle_to_busy = +action_url.ip_change = +action_url.forward_incoming_call = +action_url.reject_incoming_call = +action_url.answer_new_incoming_call = +action_url.transfer_finished = +action_url.transfer_failed = +action_url.setup_autop_finish = +action_url.held = +action_url.unheld = + + + +####################################################################################### +## Contact ## +####################################################################################### +local_contact.data.url = +###(Only T48G Model supports the parameter) +local_contact.image.url = +local_contact.icon.url = + +###(Only T46G Model supports the parameter) +local_contact.data_photo_tar.url = + +###(Except T20P Model) +directory_setting.url = +## Except T19P/T21P Model supports the parameter +directory.edit_default_input_method = +directory.search_default_input_method = +phone_setting.dsskey_directory_auto.enable = + +####################################################################################### +## Custom Factory Configuration ## +####################################################################################### +custom_factory_configuration.url = +features.custom_factory_config.enable = + +####################################################################################### +## Custom Configuration ## +####################################################################################### +configuration.url = + +####################################################################################### +## Custom Softkey(Except T20P Model) ## +####################################################################################### +phone_setting.custom_softkey_enable = +custom_softkey_call_failed.url = +custom_softkey_call_in.url = +custom_softkey_connecting.url = +custom_softkey_dialing.url = +custom_softkey_ring_back.url = +custom_softkey_talking.url = + +####################################################################################### +## Custom Input Method ## +####################################################################################### +gui_input_method.url = + +####################################################################################### +## Configure the access URL of firmware ## +####################################################################################### +###It configures the access URL of the firmware file. +###The default value is blank.It takes effect after a reboot. +firmware.url = + +####################################################################################### +## RTCP ## +####################################################################################### +###(Except T23 Model) +phone_setting.rtcp_xr_report.enable = +phone_setting.vq_rtcpxr.interval_report.enable = +phone_setting.vq_rtcpxr.session_report.enable = +phone_setting.vq_rtcpxr.states_show_on_gui.enable = +phone_setting.vq_rtcpxr.states_show_on_web.enable = +phone_setting.vq_rtcpxr_delay_threshold_critical = +phone_setting.vq_rtcpxr_delay_threshold_warming = +phone_setting.vq_rtcpxr_display_jitter.enable = +phone_setting.vq_rtcpxr_display_jitter_buffer_max.enable = +phone_setting.vq_rtcpxr_display_local_call_id.enable = +phone_setting.vq_rtcpxr_display_local_codec.enable = +phone_setting.vq_rtcpxr_display_moscq.enable = +phone_setting.vq_rtcpxr_display_moslq.enable = +phone_setting.vq_rtcpxr_display_packets_lost.enable = +phone_setting.vq_rtcpxr_display_remote_call_id.enable = +phone_setting.vq_rtcpxr_display_remote_codec.enable = +phone_setting.vq_rtcpxr_display_round_trip_delay.enable = +phone_setting.vq_rtcpxr_display_start_time.enable = +phone_setting.vq_rtcpxr_display_stop_time.enable = +phone_setting.vq_rtcpxr_display_symm_oneway_delay.enable = +phone_setting.vq_rtcpxr_interval_period = +phone_setting.vq_rtcpxr_moslq_threshold_critical = +phone_setting.vq_rtcpxr_moslq_threshold_warming = +####################################################################################### +## Reboot ## +####################################################################################### +auto_provision.reboot_force.enable = + +####################################################################################### +## Call Display ## +####################################################################################### +phone_setting.called_party_info_display.enable = +phone_setting.call_info_display_method = +##(Except T23 Model) +phone_setting.contact_photo_display.enable = + + + + + + + diff --git a/phones/yealink/v80/orig/AutoDST/AutoDST.xml b/phones/yealink/v80/orig/AutoDST/AutoDST.xml new file mode 100644 index 0000000..74a5e5b --- /dev/null +++ b/phones/yealink/v80/orig/AutoDST/AutoDST.xml @@ -0,0 +1,116 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/phones/yealink/v80/orig/Common.cfg b/phones/yealink/v80/orig/Common.cfg new file mode 100644 index 0000000..f9fd1c1 --- /dev/null +++ b/phones/yealink/v80/orig/Common.cfg @@ -0,0 +1,1464 @@ +#!version:1.0.0.1 + +##File header "#!version:1.0.0.1" can not be edited or deleted, and must be placed in the first line.## +##This template file is applicable to SIP-T28P/T26P/T22P/T20P/T21P/T19P/T46G/T42G/T41P IP phones running firmware version 72 or later.## +##For more information on configuration parameters, refer to Yealink_SIP-T2_Series_T19P_T4_Series_IP_Phones_Auto_Provisioning_Guide.## + +####################################################################################### +## Hostname ## +####################################################################################### +network.dhcp_host_name = + +####################################################################################### +## PPPoE(Except T41P/T42G Models) ## +####################################################################################### +network.pppoe.user = +network.pppoe.password = + + +####################################################################################### +## Network Advanced ## +####################################################################################### +##It enables or disables the PC port.0-Disabled,1-Auto Negotiation. +##The default value is 1.It takes effect after a reboot. +network.pc_port.enable = + +##It configures the transmission mode and speed of the Internet (WAN) port. +##0-Auto negotiate +##1-Full duplex 10Mbps +##2-Full duplex 100Mbps +##3-Half duplex 10Mbps +##4-Half duplex 100Mbps +##5-Full duplex 1000Mbps (only applicable to SIP-T42G and SIP-T46G IP phones) +##The default value is 0.It takes effect after a reboot. +network.internet_port.speed_duplex = + +##It configures the transmission mode and speed of the PC (LAN) port. +##0-Auto negotiate +##1-Full duplex 10Mbps +##2-Full duplex 100Mbps +##3-Half duplex 10Mbps +##4-Half duplex 100Mbps +##5-Full duplex 1000Mbps (only applicable to SIP-T42G and SIP-T46G IP phones) +##The default value is 0.It takes effect after a reboot. +network.pc_port.speed_duplex = + +##It enables or disables the phone to use manually configured static IPv4 DNS when Internet (WAN) port type for IPv4 is configured as DHCP. +##0-Disabled (use the IPv4 DNS obtained by DHCP) 1-Enabled +##The default value is 0.It takes effect after a reboot. +network.static_dns_enable = + +network.ipv6_static_dns_enable = + +###Only T41P/T42G/T46G Models support this parameter +network.vlan.pc_port_mode = +##It enable or disable to use A record of TTL +##The defalue value is 1;0-Disable 1-Enable + +network.dns.ttl_enable = +##It configures the LAN MTU (Except T21D/T19D) +##The default value is 1500,.Integer from 128 to 1500.It takes effect after a reboot. +network.mtu_value = + + +####################################################################################### +## VLAN ## +####################################################################################### +network.vlan.internet_port_enable = +network.vlan.internet_port_vid = +network.vlan.internet_port_priority = +network.vlan.pc_port_enable = +network.vlan.pc_port_vid = +network.vlan.pc_port_priority = +network.vlan.dhcp_enable = +network.vlan.dhcp_option = +##It configures LLDP or manually VLAN can't obtain IP, whether to switch to other methods of VLAN or closed VLAN to get IP +##(Except T19P/T21P Models) 0-Disable 1-Enable +network.vlan.vlan_change.enable = + +####################################################################################### +## WEB Port ## +####################################################################################### +##It configures the HTTP port for web server access. +##The default value is 80.It takes effect after a reboot. +network.port.http = + +##It configures the HTTPS port for web server access. +##The default value is 443.It takes effect after a reboot. +network.port.https = + +wui.https_enable = +wui.http_enable = + +####################################################################################### +## QoS ## +####################################################################################### +##It configures the voice QoS. +##The default value is 46.It takes effect after a reboot.Integer from 0 to 63 +network.qos.rtptos = + +##It configures the SIP QoS. +##The default value is 26.It takes effect after a reboot.Integer from 0 to 63 +network.qos.signaltos = + +####################################################################################### +## 802.1X ## +####################################################################################### +network.802_1x.mode = +network.802_1x.identity = +network.802_1x.md5_password = +network.802_1x.root_cert_url = +network.802_1x.client_cert_url = + +##It configure the mouth of the PC 802.1 x - logoff function.It takes effect after a reboot. +##The default value is 0-Dsable , 1-Enable +network.802_1x.proxy_eap_logoff.enable = +####################################################################################### +## OpenVPN(Except T19P Model) ## +####################################################################################### +network.vpn_enable = +openvpn.url = + +####################################################################################### +## LLDP ## +####################################################################################### +network.lldp.enable = +network.lldp.packet_interval = + +####################################################################################### +## CDP ## +####################################################################################### +network.cdp.enable = +network.cdp.packet_interval = + +####################################################################################### +## Span to PC ## +####################################################################################### +network.span_to_pc_port = + +####################################################################################### +## RTP Port ## +####################################################################################### +##It configures the maximum local RTP port. +##The default value is 11800.It takes effect after a reboot.Integer from 1024 to 65535 +network.port.max_rtpport = + +##It configures the maximum local RTP port. +##The default value is 11780.It takes effect after a reboot.Integer from 1024 to 65535 +network.port.min_rtpport = + +####################################################################################### +## Syslog ## +####################################################################################### +syslog.mode = + +##It configures the IP address or domain name of the syslog server when exporting log to the syslog server. +##It takes effect only if the parameter syslog.mode is configured as Server. +##The default value is blank.It takes effect after a reboot. +syslog.server = + +##It configures the detail level of syslog information to be exported.0 means nothing and 6 means all. +##The default value is 3.It takes effect after a reboot.Integer from 0 to 6 +syslog.log_level = + +####################################################################################### +## TR069(Except T41P/T42G Models) ## +####################################################################################### +managementserver.enable = +managementserver.username = +managementserver.password = +managementserver.url = +managementserver.connection_request_username = +managementserver.connection_request_password = +managementserver.periodic_inform_enable = +managementserver.periodic_inform_interval = + +####################################################################################### +## Autoprovision ## ## +####################################################################################### +### It enables or disables the phone to synchronize personalized configuration settings with the auto provisioning server. +### If it is set to 1 (Enabled), personalized configuration settings via web/phone user interface are saved in the MAC-local.cfg file on the phone, +### and then the phone will upload the MAC-local.cfg file to the provisioning server. During auto provisioning, the phone requests to download the MAC-local.cfg file on the provisioning server. +### 0-Disabled, 1-Enabled. The default value is 0. +auto_provision.custom.sync = + +### It enables or disables the phone to protect personalized configuration settings even after auto provisioning. +### If it is set to 1 (Enabled), personalized configuration settings via web/phone user interface will be protected and remained after auto provisioning. +### 0-Disabled, 1-Enabled. The default value is 0. +auto_provision.custom.protect = + +auto_provision.custom.upload_method= + +####################################################################################### +## Autop Mode ## +####################################################################################### +auto_provision.power_on = + +####################################################################################### +## Autop PNP ## +####################################################################################### +auto_provision.pnp_enable = + +####################################################################################### +## Autop DHCP ## +####################################################################################### +auto_provision.dhcp_option.enable = +auto_provision.dhcp_option.list_user_options = + +####################################################################################### +## Autop Repeat ## +####################################################################################### +auto_provision.repeat.enable = +auto_provision.repeat.minutes = + +####################################################################################### +## Autop Weekly ## +####################################################################################### +auto_provision.weekly.enable = +auto_provision.weekly.dayofweek = +auto_provision.weekly.begin_time = +auto_provision.weekly.end_time = + +####################################################################################### +## Autop URL ## +####################################################################################### +auto_provision.server.url = +auto_provision.server.username = +auto_provision.server.password = + +####################################################################################### +## Autop AES Key ## +####################################################################################### +##It configures the AES key for decrypting the Common CFG file. The valid characters contain: 0 ~ 9, A ~ Z, a ~ z. +##The default value is blank. +auto_provision.aes_key_16.com = + +##It configures the AES key for decrypting the MAC-Oriented CFG file. The valid characters contain: 0 ~ 9, A ~ Z, a ~ z. +##The default value is blank. +auto_provision.aes_key_16.mac = + +auto_provision.aes_key_in_file = + +##It configures the access URL of the custom MAC-Oriented CFG file. +##The default value is blank. +custom_mac_cfg.url = + +##It configures the value (vendor name of the device) of DHCP option 60. +##The default value is yealink. +auto_provision.dhcp_option.option60_value = + + + +####################################################################################### +## Autop wildcard ## +####################################################################################### + +auto_provision.url_wildcard.pn = + +####################################################################################### +## Autop Code ## +####################################################################################### +##It configures the name of the code for triggering auto provisioning. +##The default value is blank.It takes effect after a reboot. +autoprovision.1.name = + +##It configures the code for triggering auto provisioning. +##Valid characters are digits, # and *.Example:autoprovision.1.code = *99The default value is blank. +##It takes effect after a reboot. +autoprovision.1.code = + +##It configures the access URL of auto provisioning server.The default value is blank. +##It takes effect after a reboot. +autoprovision.1.url = + +##It configures the user name for authentication during auto provisioning. +##The default value is blank.It takes effect after a reboot. +autoprovision.1.user = + +##It configures the password for authentication during auto provisioning. +##The default value is blank.It takes effect after a reboot. +autoprovision.1.password = + +##It configures the AES key for decrypting the Common CFG file. +##The default value is blank.It takes effect after a reboot. +autoprovision.1.com_aes = + +##It configures the AES key for decrypting the MAC-Oriented CFG file. +##The default value is blank.It takes effect after a reboot. +autoprovision.1.mac_aes = + +####################################################################################### +## Watch Dog ## +####################################################################################### +watch_dog.enable = + +####################################################################################### +## SIP Advanced ## +####################################################################################### +sip.use_23_as_pound = +sip.rfc2543_hold = +sip.use_out_bound_in_dialog = +sip.reg_surge_prevention = +sip.send_response_by_request = +sip.notify_reboot_enable = +sip.disp_incall_to_info = +sip.limit_server_name = +sip.limit_server_reason = +sip.listen_port = +sip.tls_listen_port = +sip.trust_ctrl = +sip.nat_stun.enable = +sip.nat_stun.server = +sip.nat_stun.port = +sip.timer_t1 = +sip.timer_t2 = +sip.timer_t4 = +custom.features.redial_via_local_sip_server.enable = + + +##It is XSI authentication mode.0-Disable 1-Enable (Except T19P/T21P Models) +sip.authentication_for_xsi = +##It is DSS KEY to call park type, whether the trigger BLF function.It takes effect after a reboot. +##The default value is 0-Disable(DSS KEY to call park type,triggering BLF function) 1-Enable +sip.call_park_without_blf = +##It is ASCII conversion into corresponding symbols. +##The defalult value is blank. 0-Disable 1-Enable +sip.escape_characters.enable = +##The default value is 0 ( said according to the transmission mode configured to listen on port),1- +##1-said at the same time to monitor TCP and UDP +##2-said to monitor TCP and UDP at the same time, and from the BLF - the LIST to subscribe to the contact with a transport = TCP parameters +sip.listen_mode = +##The default value is 0-Disable, 1-Enable.It takes effect after a reboot. +##0-registered according to the uri of the tectonic refer - by domain +##1-according to refer the from header fields to construct refer - by domain + +sip.refer_by_header_auto_build = +##The default is blank.The Valid characters are digits - _.! ~ * # '() & Q462 = + R452 $,;?/ \ 0 +##It is username needs to be preserved in a special notation. +sip.reserve_characters = +##The default value is 0.(contracting out the random contact, via port to carry fixed port).It takes effect after a reboot. +##1-the out-contracting port random contact, via port to carry +##2-the out-contracting ports fixed contact, via carry fix +sip.tcp_port_random_mode = + + +####################################################################################### +## Echo Cancellation ## +####################################################################################### +voice.vad = +voice.cng = +voice.echo_cancellation = +voice.call_preview_mode = + +####################################################################################### +## Jitter Buffer ## +####################################################################################### +voice.jib.adaptive = +voice.jib.min = +voice.jib.max = +voice.jib.normal = + +####################################################################################### +## Tones ## +####################################################################################### +voice.tone.country = +voice.tone.dial = +voice.tone.ring = +voice.tone.busy = +voice.tone.congestion = +voice.tone.callwaiting = +voice.tone.dialrecall = +voice.tone.info = +voice.tone.stutter = +voice.tone.autoanswer = +voice.tone.message = + +####################################################################################### +## Volume ## +####################################################################################### +voice.handfree.spk_vol = +voice.handfree.tone_vol = +voice.handset.spk_vol = +voice.handset.tone_vol = +voice.headset.spk_vol = +voice.headset.tone_vol = +voice.ring_vol= +voice.group_spk_vol = + +### Only T28P/T26P/T22P/T20P Models support the three parameters +voice.handfree_send = +voice.handset_send = +voice.headset_send = + +####################################################################################### +## Transfer ## +####################################################################################### +##It enables or disables the transferee partys phone to prompt a missed call on the LCD screen before displaying +##the caller ID when performing a semi-attended transfer.0-Enabled,1-Disabled +##The default value is 1. +transfer.semi_attend_tran_enable = + +##It enables or disables the phone to complete the blind transfer through on-hook.0-Disabled,1-Enabled . +##The default value is 1. +transfer.blind_tran_on_hook_enable = + +##It enables or disables the phone to transfer call to the two parties after a local conference call hangs up. +##0-Disabled,1-Enabled. +##The default value is 0. +transfer.tran_others_after_conf_enable = + +##It enables or disables the phone to complete the attended transfer through on-hook. +##0-Disabled,1-Enabled. +##The default value is 1. +transfer.on_hook_trans_enable = + +##It configures the DSS key behavior during an active call when user presses the DSS +##key and the DSS key is configured as a speed dial, transfer or BLF/BLF list key. +##0-New Call,1-Attended Transfer,2-Blind Transfer. +##The default value is 2. +transfer.dsskey_deal_type = + +###Except T20P/T41P/T42G/T46G Models +##It enables or disables the phone to enter Transfer to menu during multiple calls when pressing the transfer soft key or TRAN key. +##0-Disabled,1-Enabled. +##The default value is 1. +transfer.multi_call_trans_enable = + +####################################################################################### +## Language Settings ## +####################################################################################### +##It configures the language of the web user interface. +##Chinese_S is only applicable to SIP-T19P, SIP-T21P and SIP-T46G IP phones. +##Chinese_T is only applicable to SIP-T46G IP phones. +##French, Portuguese and Spanish are not applicable to SIP-T19P and SIP-T21P IP phones. +lang.wui = + +##It configures the language of the phone user interface. +##Chinese_S and Chinese_T are only applicable to SIP-T19P, SIP-T21P and SIP-T46G IP phones. +##The default value is English. +lang.gui = + +gui_lang.url = +gui_lang.delete = +##Except T19P/T21P Models +wui_lang.url = +wui_lang_note.url = +wui_lang.delete = + +####################################################################################### +## Auto Redial ## +####################################################################################### +auto_redial.enable = +auto_redial.interval = +auto_redial.times = + +####################################################################################### +## Zero Touch ## +####################################################################################### +zero_touch.enable = +zero_touch.wait_time = +zero_touch.network_fail_wait_times = +zero_touch.network_fail_delay_times = + +####################################################################################### +## Push XML ## +####################################################################################### +push_xml.server = +push_xml.block_in_calling= +push_xml.sip_notify= + +####################################################################################### +## Dial Plan ## +####################################################################################### +dialplan.area_code.code = +dialplan.area_code.min_len = +dialplan.area_code.max_len = +dialplan.area_code.line_id = + +### X ranges from 1 to 10 +###dialplan.block_out.number.x = +###dialplan.block_out.line_id.x = + +dialplan.block_out.number.1 = +dialplan.block_out.line_id.1 = + +###X ranges from 1 to 100 +###dialplan.dialnow.rule.X = +###dialplan.dialnow.line_id.X = + +dialplan.dialnow.rule.1 = +dialplan.dialnow.line_id.1 = + +###X ranges from 1 to 100 +###dialplan.replace.prefix.X = +###dialplan.replace.replace.X = +###dialplan.replace.line_id.X = + +dialplan.replace.prefix.1 = +dialplan.replace.replace.1 = +dialplan.replace.line_id.1 = + +dialplan_dialnow.url = +phone_setting.dialnow_delay = +dialplan_replace_rule.url = + + +####################################################################################### +## Remote Phonebook(Except T20P Model) ## +####################################################################################### +###X ranges from 1 to 5 +###remote_phonebook.data.X.url = +###remote_phonebook.data.X.name = + +remote_phonebook.data.1.url = +remote_phonebook.data.1.name = + +###Except T41P/T42G Models +remote_phonebook.display_name = + +###It enables or disables the phone to update the data of the remote phone book at a time when accessing the remote phone book. +###0-Disabled, 1-Enabled. The default value is 0.(Except T19P/T21P Models) +features.remote_phonebook.enter_update_enable = + +##It enables or disables the phone to perform a remote phone book search when receiving an incoming call. +##0-Disabled,1-Enabled. +##The default value is 0. +features.remote_phonebook.enable = + +##It configures the interval (in seconds) for the phone to update the data of the remote phone book from the remote phone book server. +##The value 0 means the phone will not regularly update the data of the remote phone book from the remote phone book server. +##The default value is 21600.Integer from 3600 to 2592000,and 0. +features.remote_phonebook.flash_time = + +####################################################################################### +## LDAP(Except T19P/T20P Models) ## +####################################################################################### +##It enables or disables LDAP feature.0-Disabled,1-Enabled. +##The default value is 0. +ldap.enable = + +##It configures the criteria for searching the contact name attributes. +##Example:ldap.name_filter = (|(cn=%)(sn=%)). +##The default value is blank. +ldap.name_filter = + +##It configures the criteria for searching the contact number attributes. +##Example:ldap.number_filter = (|(telephoneNumber=%)(mobile=%)(ipPhone=%)) +##The default value is blank. +ldap.number_filter = + +##It configures the IP address or domain name of the LDAP server. +##The default value is blank. +ldap.host = + +##It configures the port of the LDAP server. +##The default value is 389.Integer from 1 to 65535. +ldap.port = + +##It configures the LDAP search base which corresponds to the location of the LDAP phonebook. +##Example:ldap.base = dc=yealink,dc=cn. +##The default value is blank. +ldap.base = + +##It configures the user name for accessing the LDAP server. +##The default value is blank. +ldap.user = + +##It configures the password for accessing the LDAP server. +##The default value is blank. +ldap.password = + +##It configures the maximum of the search results returned by the LDAP server to be displayed. +##The default value is 50.Integer from 1 to 32000. +ldap.max_hits = + +##It configures the name attributes of each record to be returned by the LDAP server. +##Multiple attributes are separated by spaces.Example:ldap.name_attr =sn cn. +##The default value is blank. +ldap.name_attr = + +##It configures the number attributes of each record to be returned by the LDAP server. +##Multiple attributes are separated by spaces.Example:ldap.numb_attr = Mobile ipPhone. +##The default value is blank. +ldap.numb_attr = + +##It configures the display name of the contact record displayed on the LCD screen. The value of this parameter must start with % symbol. +##Example:ldap.display_name = %cn +##The default value is blank. +ldap.display_name = + +##It configures the LDAP version. +##The default value is 3. +ldap.version = + +##It enables or disables the phone to perform an LDAP search when receiving an incoming call. +##0-Disabled,1-Enabled. +##The default value is 0. +ldap.call_in_lookup = + +##It enables or disables the phone to sort the search results in alphabetical order or numerical order. +##0-Disabled,1-Enabled. +##The default value is 0. +ldap.ldap_sort = +##It is the electricity + start, automatic search + 00 the beginning and the beginning of the numbe +##The default value is 0.(0-Disable,1-Enable )(Except T19P/T21P Models) +ldap.incoming_call_special_search.enable = +##The default value is 0,value of 0 to 2, respectively the ldap, ldap + StarTLS and ldaps +ldap.tls_mode = +ldap.call_out_lookup = + +####################################################################################### +## Features ## +####################################################################################### +features.normal_refuse_code = +features.auto_answer_delay = +features.allow_mute = +features.group_listen_in_talking_enable = +features.call_completion_enable = +features.call_num_filter = +features.direct_ip_call_enable = +features.relog_offtime = +features.ringer_device.is_use_headset = +features.factory_pwd_enable = +features.anonymous_response_code = +features.export_cfg_erase_pwd = +features.show_action_uri_option = +features.reset_by_long_press_enable = +features.show_anywhere_remote_office_enable = +features.upload_server = +features.call_log_show_num = +features.ldap.input_type = +features.call_invite_format = +action_url.show_msgbox = +phone_setting.logon_wizard_forever_wait = +features.call_invite_format = +features.transfer_type = +features.caller_name_type_on_dialing = +phone_setting.unregister_account_block_out.enable= +gui_input_method.delete = +features.off_hook_answer.enable = + + + +##Only for T46G Models support this parameter +features.block_linekey_in_menu.enable = + +features.shorten_linekey_label.enable = +features.dsskey_blind_tran = +features.special_auto_answer_tone = +features.blf_pickup_only_send_code = +features.display_method_on_dialing = + + +##It is configured in the middle of the screen shows the current default at the bottom of the account name. +##The default is 0.CNT version 1. +features.show_default_account= + +## Except T4X Models support this +features.reboot_in_talk_enable = + +## Except T19P/T21P Models support this +features.barge_in_via_username.enable = + +features.flash_url_dsskey_led.enable = +features.default_account = +features.forward_call_popup.enable = +features.linekey_call_with_default_account = +features.missed_call_popup.enable = +features.text_message_popup.enable = +features.voice_mail_popup.enable = +features.hide_feature_access_codes.enable = + +## Except T19P/T21P/T4X Models support this +features.hide_caller_id.enable = + +## Only for T4X Models support this parameter +features.hide_zero_touch_url.enable = + +## Only T46G Models support this parameter +features.config_dsskey_length = + + + +####################################################################################### +## Features Forward ## +####################################################################################### + +###Except T19P Model +features.fwd_mode = + +features.fwd_diversion_enable = + +####################################################################################### +## Features DND ## +####################################################################################### + +###Except T19P Model +features.dnd_mode = + +features.dnd.enable = +features.dnd.on_code = +features.dnd.off_code = +features.dnd_refuse_code = +features.dnd.emergency_enable = +features.dnd.emergency_authorized_number = + +####################################################################################### +## Features Bluetooth(Only for T46G model) ## +####################################################################################### +features.bluetooth_enable = + +####################################################################################### +## Features BLF ## +####################################################################################### +##It configures BLF LED mode and provides four kinds of definition for the BLF/BLF list key LED status. +##For more information, refer to BLF LED Mode on page 218. +##The default value is 0. +features.blf_led_mode = + +##It enables or disables the phone to deal with the Version header in the BLF NOTIFY message sent by the server. +##0-Disabled,1-Enabled. +##The default value is 0.It takes effect after a reboot. +features.blf_list_version = + +####################################################################################### +## Features Intercom ## +####################################################################################### +features.intercom.allow = +features.intercom.mute = +features.intercom.tone = +features.intercom.barge = + +####################################################################################### +## Features Hotline ## +####################################################################################### +##It configures the hotline number. +##The default value is blank. +features.hotline_number = + +##It configures the delay time (in seconds) for the phone to dial out the hotline number automatically. +##The default value of delay time is 4.Integer from 0 to 10 +features.hotline_delay = + +####################################################################################### +## Features DTMF ## +####################################################################################### +features.dtmf.hide = + +###Except T20P Model +features.dtmf.hide_delay = + +features.dtmf.repetition = +features.dtmf.transfer = +features.dtmf.replace_tran = +features.dtmf.duration = +features.dtmf.volume = + +####################################################################################### +## Features Audio Settings ## +####################################################################################### +features.headset_prior = + +###Except T19P/T21P Models +features.headset_training = +features.alert_info_tone = +features.busy_tone_delay = +features.send_pound_key = +features.key_as_send = +features.send_key_tone = +features.key_tone = +features.play_hold_tone.enable = +features.play_hold_tone.delay = +features.redial_tone = +features.partition_tone = + +####################################################################################### +## Features Action URI ## +####################################################################################### +features.action_uri_limit_ip = + + +####################################################################################### +## Features Prefix ## +####################################################################################### +features.password_dial.enable = +features.password_dial.prefix = +features.password_dial.length = + +####################################################################################### +## Features History ## +####################################################################################### +features.save_call_history = + +####################################################################################### +## Notification Popups ## +####################################################################################### +features.voice_mail_popup.enable= +features.missed_call_popup.enable= +features.forward_call_popup.enable= +features.text_message_popup.enable= + +####################################################################################### +## Ringtone ## +####################################################################################### +ringtone.url = +ringtone.delete = + +####################################################################################### +## Phone Settings ## +####################################################################################### +phone_setting.inter_digit_time = +phone_setting.ring_type = + +phone_setting.ring_for_tranfailed = +phone_setting.is_deal180 = +phone_setting.show_code403 = +phone_setting.label_scroll_interval_time = + + +###Only T41P/T42G/T46G Models support this parameter +phone_setting.page_tip = + +phone_setting.predial_autodial = +phone_setting.headsetkey_mode = +features.voice_mail_tone_enable = +##Except T19P/T21P Models support this parameter +phone_setting.reserve_certs_enable = +phone_setting.called_party_info_display.enable = + +phone_setting.call_info_display_method = +## Only for T4X Models support this parameter + + + +####################################################################################### +## Power Led Settings ## +####################################################################################### +phone_setting.common_power_led_enable = +phone_setting.talk_and_dial_power_led_enable = +phone_setting.mail_power_led_flash_enable = +phone_setting.ring_power_led_flash_enable = +phone_setting.mute_power_led_flash_enable= +phone_setting.hold_and_held_power_led_flash_enable = + +##It configures the level of the active backlight intensity. +##For SIP-T28P IP phones and the connected EXP39: +##The default value is 2. +##For SIP-T46G IP phones and the connected EXP40: +##The default value is 8. +phone_setting.active_backlight_level = + +##It configures the phone to go out or reduce intensity of the backlight on the LCD screen after a period of inactivity. +##0-Off,1-Low. +##The default value is 1. +phone_setting.inactive_backlight_level = + +####################################################################################### +## Phone Setting Display ## +####################################################################################### + +###Except T20P/T19P/T21P Models +##It configures the backlight time (in seconds).0, 1, 15, 30, 60, 120, 300, 600 or 1800. +phone_setting.backlight_time = + +###Except T20P/T22P/T41P/T42G Models +###It configures the contrast of the LCD screen. +###For SIP-T19P and SIP-T21P IP phones, it configures the LCDs contrast of the phone only. +###For SIP-T26P IP phones, it configures the LCDs contrast of the connected EXP39 only. +###For SIP-T28P IP phones, it configures the LCDs contrast of the IP phone and the connected EXP39. +###For SIP-T46G IP phones, it configures the LCDs contrast of the connected EXP40 only. +###The default value is 6. +phone_setting.contrast = + +###Except T46G Model +##It configures the logo mode of the LCD screen (except for SIP-T20P IP phones). +##For SIP-T19P/T21P/T22P/T26P/T41P/T42G IP phones: +##0-Disabled 1-System logo 2-Custom logo +##The default value is 0. +##For SIP-T28P IP phones: +##1-System logo 2-Custom logo +##The default value is 1. +##It enables or disables a text logo (for SIP-T20P IP phones). +##0-Disabled 1-Enabled +##The default value is 0. +phone_setting.lcd_logo.mode = + +###Only T20P Model supports this parameter +##It configures a text logo. +##The default value is Yealink. +phone_setting.lcd_logo.text = + +###Except T20P/T46G Models +lcd_logo.url = +lcd_logo.delete = + +###Only T46G Model supports the two parameters +###It configures the wallpaper displayed on the phone. +###Example:To configure a phone built-in picture (e.g., 1.png) to be wallpaper, the value format is: +###phone_setting.backgrounds = Resource:1.png +###To configure a custom picture (e.g., custom1.png) to be wallpaper, the value format is: Config:custom1.png +###The default value is Resource:Default.jpg. +phone_setting.backgrounds = + +wallpaper_upload.url = + +####################################################################################### +## Phone Setting BLF ## +####################################################################################### +###It enables or disables the phone to automatically configure the BLF list keys in order. +###0-Disabled,1-Enabled. +###The default value is 1. + +phone_setting.auto_blf_list_enable = + +###Only T26P/T28P/T46G Models support the parameter +###It configures the order of BLF list keys assigned automatically. +###0-Line Keys->Memory Keys->Extension Keys +###1-Extension Keys->Memory Keys->Line Keys +###Memory keys are not applicable to SIP-T46G IP phones. +###The default value is 0. +phone_setting.blf_list_sequence_type = + +####################################################################################### +## Key Lock ## +####################################################################################### +##Except T41P/T42G/T46G Models +phone_setting.lock = + +###Only T41P/T42G/T46G Models support the two parameters +###It enables or disables keypad lock feature. +###0-Disabled,1-Enabled. +###The default value is 0. +phone_setting.phone_lock.enable = + +###It configures the keypad lock type. +###0-All Keys,1-Function Keys,2-Menu Key. +###The default value is 0. +phone_setting.phone_lock.lock_key_type = + +###It configures the password for unlocking the keypad. +###The default value is 123. +phone_setting.phone_lock.unlock_pin = + +###It configures the interval (in seconds) to automatically lock the keypad. +###The default value is 0 (the keypad is locked only by long pressing the pound key or pressing the keypad lock key) +phone_setting.phone_lock.lock_time_out = +phone_setting.emergency.number = + +####################################################################################### +## Multicast ## +####################################################################################### + +###Except T19P Model +multicast.codec = + +multicast.receive_priority.enable = +multicast.receive_priority.priority = + +###X ranges from 1 to 10 +###multicast.listen_address.X.label = +###multicast.listen_address.X.ip_address = + +multicast.listen_address.X.label = +multicast.listen_address.X.ip_address = +###Except T19P/T21P Models support this parameter (X:1-10) + +multicast.paging_address.X.ip_address = +multicast.paging_address.X.label = +####################################################################################### +## Super Search(Except T20P Model) ## +####################################################################################### +super_search.recent_call = +super_search.url = + +####################################################################################### +## Security ## +####################################################################################### +###Define the login username and password of the user, var and administrator. +###If you change the username of the administrator from "admin" to "admin1", your new administrator's username should be configured as: security.user_name.admin = admin1. +###If you change the password of the administrator from "admin" to "admin1pwd", your new administrator's password should be configured as: security.user_password = admin1:admin1pwd. + +###The following examples change the user's username to "user23" and the user's password to "user23pwd". +###security.user_name.user = user23 +###security.user_password = user23:user23pwd +###The following examples change the var's username to "var55" and the var's password to "var55pwd". +###security.user_name.var = var55 +###security.user_password = var55:var55pwd +security.user_name.user = +security.user_name.admin = +security.user_name.var = +security.user_password = + +###It enables or disables the phone to only accept the certificates in the Trusted Certificates list. +###0-Disabled,1-Enabled. +###The default value is 1.It takes effect after a reboot. +security.trust_certificates = + +###It configures the source certificates for the phone to authenticate for TLS connection. +###0-Default certificates,1-Custom certificates,2-All certificates. +###The default value is 0.It takes effect after a reboot. +security.ca_cert = + +###It configures the device certificates for the phone to send for TLS authentication. +###0-Default certificates,1-Custom certificates. +###The default value is 0.It takes effect after a reboot. +security.dev_cert = + +###It enables or disables the phone to mandatorily validate the CommonName or SubjectAltName of the certificate received from the connecting server. +###0-Disabled,1-Enabled. +###The default value is 0.It takes effect after a reboot. +security.cn_validation = + +security.trust_custom_certificates = + +####################################################################################### +## User Mode ## +####################################################################################### +###It enables or disables the 3-level permissions (admin, user, var). +###0-Disabled,1-Enabled. +###The default value is 0.It takes effect after a reboot. +security.var_enable = + +web_item_level.url = + +####################################################################################### +## Trusted Certificates ## +####################################################################################### +trusted_certificates.url = +trusted_certificates.delete = + +####################################################################################### +## Server Certificates ## +####################################################################################### +server_certificates.url = +server_certificates.delete = + +####################################################################################### +## Memory Key(Only for T26P/T28P Models) ## +####################################################################################### +###T26P/T28P X ranges from 1 to 10 + +#memorykey.X.type--Customize the Memorykey type. +#The valid types are: + +#0-NA 1-Conference 2-Forward 3-Transfer 4-Hold 5-DND 7-Call Return 8-SMS 9-Directed Pickup 10-Call Park 11-DTMF 12-Voice Mail 13-Speed Dial 14-Intercom +#15-Line 16-BLF 17-URL 18-Group Listening 20-Private Hold 22-XML Group 23-Group Pickup 24-Multicast Paging 25-Record 27-XML Browser +#34-Hot Desking 35-URL Record 38-LDAP 39-BLF List 40-Prefix 41-Zero Touch 42-ACD 45-Local Group 46-Network Group 49-Custom Button +#50-Keypad Lock 55-Meet-Me Conference 56-Retrieve Park 57-Hoteling 58-ACD Grace 59-Sisp Code 60-Emergency 61-Directory + +###memorykey.X.line = +###memorykey.X.value = +###memorykey.X.pickup_value = +###memorykey.X.type = +###memorykey.X.xml_phonebook = + +###It configures the desired line to apply the key feature. +###The default value is 1.Integer from 1 to 6 +memorykey.1.line = + +###It configures the value of the memory key feature. +###For example, when set the key feature to BLF, it configures the number of the monitored user. +###The default value is blank. +memorykey.1.value = + +###It configures the pickup code for BLF feature or conference ID followed by the # sign for Meet-Me conference feature. +###It only applies to BLF and Meet-Me conference features. +###The default value is blank. +memorykey.1.pickup_value = + +###It configures the desired feature for memory key X. +###The default value is 0. +memorykey.1.type = + +###It configures the desired local group/XML group/network group for the memory key X. +###It only applies to the Local Group, XML Group and Network Group features. +###The default value is 0. +memorykey.1.xml_phonebook = + +####################################################################################### +## Line Key ## +####################################################################################### +###Except T19D Model +###T21D/T20P X ranges from 1 to 2 +###T22P/T26P X ranges from 1 to 3 +###T28P X ranges from 1 to 6 +###T41P/T42G X ranges from 1 to 15 +###T46G X ranges from 1 to 27 + +#linekey.X.type--Customize the linekey type. +#The valid types are: + +#0-NA 1-Conference 2-Forward 3-Transfer 4-Hold 5-DND 7-Call Return 8-SMS 9-Directed Pickup 10-Call Park 11-DTMF 12-Voice Mail 13-Speed Dial +#14-Intercom 15-Line 16-BLF 17-URL 18-Group Listening 20-Private Hold 22-XML Group 23-Group Pickup 24-Multicast Paging 25-Record 27-XML Browser +#34-Hot Desking 35-URL Record 38-LDAP 39-BLF List 40-Prefix 41-Zero Touch 42-ACD 45-Local Group 46-Network Group 49-Custom Button 50-Keypad Lock +#55-Meet-Me Conference 56-Retrieve Park 57-Hoteling 58-ACD Grace 59-Sisp Code 60-Emergency 61-Directory + +#0-NA Only for T41/T42/T46) +#22-XML Group (Not support T20) +#38-LDAP (Not support T20) +#46-Network Group (Not support T20) +#8-SMS (Only support T21/T46/T22/T26/T28) +#17-URL (Only support T41/T42/T46) +#49-Custom Button (Only support T20/T22/T26/T28) + +###linekey.X.line = +###linekey.X.value = +###linekey.X.pickup_value = +###linekey.X.type = +###linekey.X.xml_phonebook = +###linekey.X.label = + +###It configures the desired line to apply the key feature.Integer from 1 to 6 +linekey.1.line = + +###It configures the value of the line key feature. +###For example, when setting the key feature to BLF, it configures the number of the monitored user. +###The default value is blank. +linekey.1.value = + +###It configures the pickup code for BLF feature or conference ID followed by the # sign for Meet-Me conference feature. +###It only applies to BLF and Meet-Me conference features. +###The default value is blank. +linekey.1.pickup_value = + +###It configures the key feature for the line key X. +linekey.1.type = + +###It configures the desired local group/XML group/network group for the line key X. +###It only applies to the Local Group, XML Group and Network Group features. +###XML Group and Network Group features are not applicable to SIP-T20P IP phones. +linekey.1.xml_phonebook = + +###It configures the label displayed on the LCD screen for each line key. +###The default value is blank. +linekey.1.label = + +####################################################################################### +## Programable Key ## +####################################################################################### +###T20P X ranges from 1 to 9 +###T28P/T26P X ranges from 1 to 14 +###T41P/T42G/T19P/T21P X ranges from 1 to 11 +###T46G/T22P X ranges from 1 to 13 + +#programablekey.x.type--Customize the programmable key type. +#The valid types are: +#0-NA 2-Forward 5-DND 7-Call Return 8-SMS 9-Directed Pickup 13-Speed Dial +#22-XML Group 23-Group Pickup 27-XML Browser 28-History 30-Menu 31-Switch Account 32-New SMS +#33-Status 34-Hot Desking 38-LDAP 40-Prefix 41-Zero Touch 43-Local Directory 44-Network Directory 45-Local Group +#46-Network Group 47-XML Directory 50-Keypad Lock 51-Switch Account Up 52-Switch Account Down 55-Meet-Me Conference 61-Directory + +#40-Prefix (Not support T20) +#22-XML Group (Not support T20) +#31-Switch Account (Not support T19/T41/T42/T46) +#38-LDAP (Not support T19/T20) +#46-Network Group (Not support T20) +#8-SMS (Not support T41/T42/T20) +#32-New SMS (Not support T41/T42/T20) +#47-XML Directory (Not support T20) +#44-Network Directory (Not support T20) +#41-Zero Touch (Not support T41/T42/T46) +#34-Hot Desking (Only support T19/T46 +#51-Switch Account Up (Only support T41/T42/T46) +#52-Switch Account Down (Only support T41/T42/T46) + +###programablekey.X.type = +###programablekey.X.line = +###programablekey.X.value = +###programablekey.X.xml_phonebook = +###programablekey.X.history_type = +###programablekey.X.label = +###programablekey.X.pickup_value = + +###It configures the key feature for the programmable key X. +programablekey.1.type = + +###It configures the desired line to apply the programmable key feature. +programablekey.1.line = + +###It configures the value of the programmable key feature. +###For example, when configuring the key feature to be Speed Dial, it configures the number. +###The default value is blank. +programablekey.1.value = + +###It configures the desired local group/XML group/network group for the programmable key. +###It only applies to the Local Group, XML Group and Network Group features. +###XML Group and Network Group features are not applicable to SIP-T20P IP phones. +programablekey.1.xml_phonebook = + +###It configures the history type of programmable key. +###0-Local History,1-Network History. +###The default value is 0. +programablekey.1.history_type = + +###It configures the label displayed on the LCD screen for each soft key. +###The default value is blank. +programablekey.1.label = + +###It configures conference ID followed by the # sign for Meet-Me conference feature. +###It only applies to Meet-Me conference feature. +###The default value is blank. +programablekey.1.pickup_value = + +####################################################################################### +## Expansion Key(Only for T26P/T28P/T46G Models) ## +####################################################################################### +###T46G/T28P/T26P X ranges from 1 to 6, Y ranges from 1 to 40 + +###expansion_module.X.key.Y.type = +###expansion_module.X.key.Y.line = +###expansion_module.X.key.Y.value = +###expansion_module.X.key.Y.pickup_value = +###expansion_module.X.key.Y.label = +###expansion_module.X.key.Y.xml_phonebook = + +###It configures the key feature of the expansion module X key Y. +expansion_module.1.key.1.type = + +###It configures the desired line to apply the expansion module key feature.Integer from 1 to 6 +expansion_module.1.key.1.line = + +###It configures the value of the expansion module key feature. +###The default value is blank. +expansion_module.1.key.1.value = + +###It configures the pickup code for BLF feature or conference ID followed by the # sign for Meet-Me conference feature. +###It only applies to BLF and Meet-Me conference features. +###The default value is blank. +expansion_module.1.key.1.pickup_value = + +###It configures the label displayed on the LCD screen of the expansion module for each key. +###The default value is blank. +expansion_module.1.key.1.label = + +###It only applies to the Local Group, XML Group and Network Group features.Integer from 0 to 48. +expansion_module.1.key.1.xml_phonebook = + +####################################################################################### +## Forward Always ## +####################################################################################### +forward.always.enable = +forward.always.target = +forward.always.on_code = +forward.always.off_code = + +####################################################################################### +## Forward Busy ## +####################################################################################### +forward.busy.enable = +forward.busy.target = +forward.busy.on_code = +forward.busy.off_code = + +####################################################################################### +## Forward No Answer ## +####################################################################################### +forward.no_answer.enable = +forward.no_answer.target = +forward.no_answer.timeout = +forward.no_answer.on_code = +forward.no_answer.off_code = + +####################################################################################### +## Forward International ## +####################################################################################### +###It enables or disables the phone to forward incoming calls to international numbers. +###0-Disabled,1-Enabled. +###The default value is 1. +forward.international.enable = + +####################################################################################### +## ACD ## +####################################################################################### +acd.auto_available = +acd.auto_available_timer = + +####################################################################################### +## Hotdesking Startup ## +####################################################################################### +phone_setting.logon_wizard = +##The default value is 1.Except T19P/T21P +features.auto_exit_logon_wizard.enable = +############## +hotdesking.startup_register_name_enable = +hotdesking.startup_username_enable = +hotdesking.startup_password_enable = +hotdesking.startup_sip_server_enable = +hotdesking.startup_outbound_enable = + +####################################################################################### +## Hotdesking Dsskey ## +####################################################################################### +hotdesking.dsskey_register_name_enable = +hotdesking.dsskey_username_enable = +hotdesking.dsskey_password_enable = +hotdesking.dsskey_sip_server_enable = +hotdesking.dsskey_outbound_enable = + +####################################################################################### +## Alert Info ## +####################################################################################### +###X ranges from 1 to 100 +###distinctive_ring_tones.alert_info.x.text = +###distinctive_ring_tones.alert_info.x.ringer = + +###It configures the internal ringer text for distinctive ringtone. +###Example: distinctive_ring_tones.alert_info.1.text = Family +###The default value is blank. +distinctive_ring_tones.alert_info.1.text = + +###It configures the desired ring tones for each text. +###The value ranges from 1 to 8, the digit stands for the appropriate ringtone. +###Ring tones 6-8 are only applicable to SIP-T46G IP phones. +###The default value is 1. +distinctive_ring_tones.alert_info.1.ringer = + +####################################################################################### +## Call Waiting ## +####################################################################################### +call_waiting.enable = +call_waiting.tone = +call_waiting.on_code = +call_waiting.off_code = + +####################################################################################### +## Action URL ## +####################################################################################### +action_url.setup_completed = +action_url.registered = +action_url.unregistered = +action_url.register_failed = +action_url.off_hook = +action_url.on_hook = +action_url.incoming_call = +action_url.outgoing_call = +action_url.call_established = +action_url.dnd_on = +action_url.dnd_off = +action_url.always_fwd_on = +action_url.always_fwd_off = +action_url.busy_fwd_on = +action_url.busy_fwd_off = +action_url.no_answer_fwd_on = +action_url.no_answer_fwd_off = +action_url.transfer_call = +action_url.blind_transfer_call = +action_url.attended_transfer_call = +action_url.hold = +action_url.unhold = +action_url.mute = +action_url.unmute = +action_url.missed_call = +action_url.call_terminated = +action_url.busy_to_idle = +action_url.idle_to_busy = +action_url.ip_change = +action_url.forward_incoming_call = +action_url.reject_incoming_call = +action_url.answer_new_incoming_call = +action_url.transfer_finished = +action_url.transfer_failed = +action_url.setup_autop_finish = +action_url.held = +action_url.unheld = + + + +####################################################################################### +## Contact ## +####################################################################################### +local_contact.data.url = +###(Only T48G Model supports the parameter) +local_contact.image.url = +local_contact.icon.url = + +###(Only T46G Model supports the parameter) +local_contact.data_photo_tar.url = + +###(Except T20P Model) +directory_setting.url = +## Except T19P/T21P Model supports the parameter +directory.edit_default_input_method = +directory.search_default_input_method = +phone_setting.dsskey_directory_auto.enable = + +####################################################################################### +## Custom Factory Configuration ## +####################################################################################### +custom_factory_configuration.url = +features.custom_factory_config.enable = + +####################################################################################### +## Custom Configuration ## +####################################################################################### +configuration.url = + +####################################################################################### +## Custom Softkey(Except T20P Model) ## +####################################################################################### +phone_setting.custom_softkey_enable = +custom_softkey_call_failed.url = +custom_softkey_call_in.url = +custom_softkey_connecting.url = +custom_softkey_dialing.url = +custom_softkey_ring_back.url = +custom_softkey_talking.url = + +####################################################################################### +## Custom Input Method ## +####################################################################################### +gui_input_method.url = + +####################################################################################### +## Configure the access URL of firmware ## +####################################################################################### +###It configures the access URL of the firmware file. +###The default value is blank.It takes effect after a reboot. +firmware.url = + +####################################################################################### +## RTCP ## +####################################################################################### +###(Except T23 Model) +phone_setting.rtcp_xr_report.enable = +phone_setting.vq_rtcpxr.interval_report.enable = +phone_setting.vq_rtcpxr.session_report.enable = +phone_setting.vq_rtcpxr.states_show_on_gui.enable = +phone_setting.vq_rtcpxr.states_show_on_web.enable = +phone_setting.vq_rtcpxr_delay_threshold_critical = +phone_setting.vq_rtcpxr_delay_threshold_warming = +phone_setting.vq_rtcpxr_display_jitter.enable = +phone_setting.vq_rtcpxr_display_jitter_buffer_max.enable = +phone_setting.vq_rtcpxr_display_local_call_id.enable = +phone_setting.vq_rtcpxr_display_local_codec.enable = +phone_setting.vq_rtcpxr_display_moscq.enable = +phone_setting.vq_rtcpxr_display_moslq.enable = +phone_setting.vq_rtcpxr_display_packets_lost.enable = +phone_setting.vq_rtcpxr_display_remote_call_id.enable = +phone_setting.vq_rtcpxr_display_remote_codec.enable = +phone_setting.vq_rtcpxr_display_round_trip_delay.enable = +phone_setting.vq_rtcpxr_display_start_time.enable = +phone_setting.vq_rtcpxr_display_stop_time.enable = +phone_setting.vq_rtcpxr_display_symm_oneway_delay.enable = +phone_setting.vq_rtcpxr_interval_period = +phone_setting.vq_rtcpxr_moslq_threshold_critical = +phone_setting.vq_rtcpxr_moslq_threshold_warming = +####################################################################################### +## Reboot ## +####################################################################################### +auto_provision.reboot_force.enable = + +####################################################################################### +## Call Display ## +####################################################################################### +phone_setting.called_party_info_display.enable = +phone_setting.call_info_display_method = +##(Except T23 Model) +phone_setting.contact_photo_display.enable = + + + + + + + diff --git a/phones/yealink/v80/orig/Contacts/contact.xml b/phones/yealink/v80/orig/Contacts/contact.xml new file mode 100644 index 0000000..f6502a4 --- /dev/null +++ b/phones/yealink/v80/orig/Contacts/contact.xml @@ -0,0 +1,12 @@ + + + + + + + + + + \ No newline at end of file diff --git a/phones/yealink/v80/orig/DialPlan/dialnow.xml b/phones/yealink/v80/orig/DialPlan/dialnow.xml new file mode 100644 index 0000000..321c5ef --- /dev/null +++ b/phones/yealink/v80/orig/DialPlan/dialnow.xml @@ -0,0 +1,6 @@ + + + + + + diff --git a/phones/yealink/v80/orig/DialPlan/dialplan.xml b/phones/yealink/v80/orig/DialPlan/dialplan.xml new file mode 100644 index 0000000..40cc13a --- /dev/null +++ b/phones/yealink/v80/orig/DialPlan/dialplan.xml @@ -0,0 +1,6 @@ + + + + + + diff --git a/phones/yealink/v80/orig/MAC.cfg b/phones/yealink/v80/orig/MAC.cfg new file mode 100644 index 0000000..dc299ce --- /dev/null +++ b/phones/yealink/v80/orig/MAC.cfg @@ -0,0 +1,2743 @@ +#!version:1.0.0.1 + +##File header "#!version:1.0.0.1" can not be edited or deleted, and must be placed in the first line.## +##This template file is applicable to SIP-T28P/T26P/T22P/T20P/T21P/T19P/T46G/T42G/T41P IP phones running firmware version 72 or later.## +##For more information on configuration parameters, refer to Yealink_SIP-T2_Series_T19P_T4_Series_IP_Phones_Auto_Provisioning_Guide.## + +####################################################################################### +## Account1 Basic Settings ## +####################################################################################### +account.1.enable = +account.1.label = +account.1.display_name = +account.1.auth_name = +account.1.user_name = +account.1.password = +account.1.outbound_proxy_enable = +account.1.outbound_host = +account.1.outbound_port = +account.1.dial_tone = + + + +##It configures the transport type for account 1. 0-UDP,1-TCP,2-TLS,3-DNS-NAPTR +##The default value is 0. +account.1.sip_server.1.transport_type = +account.1.sip_server.2.transport_type = + +####################################################################################### +## Failback ## +####################################################################################### +account.1.reregister_enable = +account.1.naptr_build = +account.1.fallback.redundancy_type = +account.1.fallback.timeout = +account.1.sip_server.1.address = +account.1.sip_server.1.port = +account.1.sip_server.1.expires = +account.1.sip_server.1.retry_counts = +account.1.sip_server.1.failback_mode = +account.1.sip_server.1.failback_timeout = +account.1.sip_server.1.register_on_enable = + +account.1.sip_server.2.address = +account.1.sip_server.2.port = +account.1.sip_server.2.expires = +account.1.sip_server.2.retry_counts = +account.1.sip_server.2.failback_mode = +account.1.sip_server.2.failback_timeout = +account.1.sip_server.2.register_on_enable = + + + +account.1.dns_cache_type = +account.1.dns_cache_a.1.name = +account.1.dns_cache_a.1.ip = +account.1.dns_cache_a.1.ttl = +account.1.dns_cache_srv.1.name = +account.1.dns_cache_srv.1.port = +account.1.dns_cache_srv.1.priority = +account.1.dns_cache_srv.1.target = +account.1.dns_cache_srv.1.weight = +account.1.dns_cache_srv.1.ttl = +account.1.dns_cache_naptr.1.name = +account.1.dns_cache_naptr.1.flags = +account.1.dns_cache_naptr.1.order = +account.1.dns_cache_naptr.1.preference = +account.1.dns_cache_naptr.1.replace = +account.1.dns_cache_naptr.1.service = +account.1.dns_cache_naptr.1.ttl = + +account.1.dns_cache_type = +account.1.dns_cache_a.2.name = +account.1.dns_cache_a.2.ip = +account.1.dns_cache_a.2.ttl = +account.1.dns_cache_srv.2.name = +account.1.dns_cache_srv.2.port = +account.1.dns_cache_srv.2.priority = +account.1.dns_cache_srv.2.target = +account.1.dns_cache_srv.2.weight = +account.1.dns_cache_srv.2.ttl = +account.1.dns_cache_naptr.2.name = +account.1.dns_cache_naptr.2.flags = +account.1.dns_cache_naptr.2.order = +account.1.dns_cache_naptr.2.preference = +account.1.dns_cache_naptr.2.replace = +account.1.dns_cache_naptr.2.service = +account.1.dns_cache_naptr.2.ttl = + +account.1.static_cache_pri = +account.1.register_expires_overlap = +account.1.subscribe_expires_overlap = + +####################################################################################### +## Register Advanced ## +####################################################################################### +##It configures the SIP server type for account X.0-Default,2-BroadSoft,4-Cosmocom,6-UCAP +##The default value is 0. + +account.1.sip_server_type = + +account.1.unregister_on_reboot = +account.1.proxy_require = +account.1.srv_ttl_timer_enable = +account.1.register_mac = +account.1.register_line = +account.1.reg_fail_retry_interval = + +###################################################################################### +## NAT Settings ## +###################################################################################### +##It enables or disables the NAT traversal for account X.0-Disabled,1-Enabled +##The default value is 0. +account.1.nat.nat_traversal = + +##It configures the IP address or domain name of the STUN server for account X. +##The default value is blank. +account.1.nat.stun_server = + +##It configures the port of the STUN server for account X. +##The default value is 3478. +account.1.nat.stun_port = + +##It configures the type of keep-alive packets sent by the phone to the NAT device to keep the communication port open so that NAT can continue to function for account X. +##0-Dsiabled,1-Default: the phone sends UDP packets to the server,2-Option: the phone sends SIP OPTION packets to the server,3-Notify: the phone sends SIP NOTIFY packets to the server. +##The default value is 1. +account.1.nat.udp_update_enable = + +##It configures the keep-alive interval (in seconds) for account X. +##The default value is 30.Integer from 15 to 2147483647 +account.1.nat.udp_update_time = + +##It enables or disables NAT Rport feature for account X.0-Disabled,1-Enabled +##The default value is 0. +account.1.nat.rport = + +####################################################################################### +## Account1 Advance Settings ## +####################################################################################### + + +##It configures the voice mail number for account X. +##The default value is blank. +voice_mail.number.1 = + +##Except T19P/T21P Models +account.1.auto_dial_enable = +account.1.auto_dial_num = + +account.1.call_id_mode = +account.1.call_info = +##It is the unit at the time of back to the fluid state +account.1.ringback_duration_time = + + +####################################################################################### +## Subscribe ## +####################################################################################### +##It enables or disables the phone to subscribe the message waiting indicator for account X.0-Disabled,1-Enabled. +##The default value is 0. +account.1.subscribe_mwi = + + +##It is configuration MWI is NOTIFY messages, whether in Terminated status attributes. +##The default value is 0(Don't handle terminated values) +account.1.mwi_parse_terminated = + +##It configures the interval (in seconds) of MWI subscription for account X. +##The default value is 3600. +account.1.subscribe_mwi_expires = + + +##It enables or disables the phone to subscribe to the voice mail number for the message waiting indicator for account X.0-Disabled,1-Enabled. +##The default value is 0. +account.1.subscribe_mwi_to_vm = + +##It configures the period (in seconds) of ACD subscription for account X. +##The default value is 1800.Except T19P/T21P Models +account.1.subscribe_acd_expires= + + +account.1.display_mwi.enable= + +####################################################################################### +## BLF List(Except T19D Model) ## +####################################################################################### +##It configures the BLF List URI to monitor a list of users for account X. +##The default value is blank. +account.1.blf.blf_list_uri = + +##It configures the feature access code for directed call pickup (default: *97) for account X. +##The default value is blank. +account.1.blf_list_code = + +##It configures the feature access code for directed call pickup with barge-in (default: *33) for account X. +##The default value is blank. +account.1.blf_list_barge_in_code = + +##It configures the period (in seconds) of the BLF subscription for account X. +##The default value is 1800.Integer from 30 to 2147483647. +account.1.blf.subscribe_period = + +##It configures the event of the BLF subscription for account X.0-Dialog,1-Presence. +##The default value is 0. +account.1.blf.subscribe_event = + +##It enables or disables the phone to handle NOTIFY messages out of the BLF dialog for account X.0-Disabled,1-Enabled. +##The default value is 0. +account.1.out_dialog_blf_enable = + +##It configures the BLF List Retrieve call parked code for account X. +##The default value is blank +account.1.blf_list_retrieve_call_parked_code = + +####################################################################################### +## BLA/SCA ## +####################################################################################### +##It enables or disables Broadsoft SCA feature for account X.0-Disabled,1-Broadsoft SCA. +##The default value is 0. +account.1.shared_line = + +##It configures the BLA number for account X. +##The default value is blank. +account.1.bla_number = + +##It configures the period (in seconds) of BLA subscription for account X. +##The default value is 300.Integer from 60 to 7200 +account.1.bla_subscribe_period = + + +##Except T19P/T21P Models +##It configures the Call Pull Feature access code for account X. +##The default value is blank. +account.1.shared_line_callpull_code = +##It configures number of linekey for SCA. +##The default value is 1. +account.1.shared_line_number_of_linekey = +####################################################################################### +## Brosoft Callpark ## +####################################################################################### +##It enables or disables Broadsoft Callpark for account X.0-Disabled,1-Broadsoft SCA. +##The default value is 0. +account.1.callpark_enable = + +####################################################################################### +## Audio Codec ## +####################################################################################### +###T19D/T21D support codec1~codec8 +###T20P/T22P/T26P/T28P/T41P/T42G/T46G support codec1~codec11 + + +account.1.codec.1.enable = +account.1.codec.1.payload_type = +account.1.codec.1.priority = +account.1.codec.1.rtpmap = + +account.1.codec.2.enable = +account.1.codec.2.payload_type = +account.1.codec.2.priority = +account.1.codec.2.rtpmap = + +account.1.codec.3.enable = +account.1.codec.3.payload_type = +account.1.codec.3.priority = +account.1.codec.3.rtpmap = + +account.1.codec.4.enable = +account.1.codec.4.payload_type = +account.1.codec.4.priority = +account.1.codec.4.rtpmap = + +account.1.codec.5.enable = +account.1.codec.5.payload_type = +account.1.codec.5.priority = +account.1.codec.5.rtpmap = + +account.1.codec.6.enable = +account.1.codec.6.payload_type = +account.1.codec.6.priority = +account.1.codec.6.rtpmap = + +account.1.codec.7.enable = +account.1.codec.7.payload_type = +account.1.codec.7.priority = +account.1.codec.7.rtpmap = + +account.1.codec.8.enable = +account.1.codec.8.payload_type = +account.1.codec.8.priority = +account.1.codec.8.rtpmap = + +account.1.codec.9.enable = +account.1.codec.9.payload_type = +account.1.codec.9.priority = +account.1.codec.9.rtpmap = + +account.1.codec.10.enable = +account.1.codec.10.payload_type = +account.1.codec.10.priority = +account.1.codec.10.rtpmap = + +account.1.codec.11.enable = +account.1.codec.11.payload_type = +account.1.codec.11.priority = +account.1.codec.11.rtpmap = + + + +####################################################################################### +## Audio Advanced ## +####################################################################################### +##It configures whether to use voice encryption service for account X.0-Disabled,1-Optional,2-Compulsory. +##The default value is 0. +account.1.srtp_encryption = + +##It configures the RTP packet time for account X.0 (Disabled), 10, 20, 30, 40, 50 or 60. +##The default value is 20. +account.1.ptime = + +## The default value is 0(Take a SRTP all encryption).1:Only carry AES - 80 secret key,2: Only carry AES - 32 secret key +account.1.srtp_auth_tag_mode = + +####################################################################################### +## Anonymous Call ## +####################################################################################### +account.1.send_anonymous_code = +account.1.anonymous_call = +account.1.anonymous_call_oncode = +account.1.anonymous_call_offcode = +account.1.reject_anonymous_call = +account.1.anonymous_reject_oncode = +account.1.anonymous_reject_offcode = +account.1.send_anonymous_rejection_code = + + +####################################################################################### +## Pickup Code ## +####################################################################################### +##It enables or disables the phone to pick up a call according to the SIP header of dialog-info for account X.0-Disabled,1-Enabled. +##The default value is 0. +account.1.dialoginfo_callpickup = + +##It configures the group pickup code for account X. +##The default value is blank. +account.1.group_pickup_code = + +##It configures the directed pickup code for account X. +##The default value is blank. +account.1.direct_pickup_code = + +####################################################################################### +## DTMF ## +####################################################################################### +account.1.dtmf.type = +account.1.dtmf.info_type = +account.1.dtmf.dtmf_payload = + +####################################################################################### +## Alert info ## +####################################################################################### +##It enables or disables the distinctive ringtones by the Alert-Info SIP header for account X.0-Disabled,1-Enabled. +##The default value is 0. +account.1.alert_info_url_enable = +##Except T19P/T21P Models +##The default value is blank.Values range 256 characters in length +account.1.alert_info = + +account.1.ringtone.ring_type = + +###Only for T46G Model +##It enables or disables the phone to download the picture information for account X when receiving an incoming call or during a call.0-Disabled,1-Enabled. +##The default value is 0. +account.1.picture_info_enable = + +####################################################################################### +## Conference ## +####################################################################################### +##It configures the conference type for account X.0-Local Conference,2-Network Conference. +##The default value is 0. +account.1.conf_type = + +##It configures the network conference URI for account X. +##The default value is blank. +account.1.conf_uri = + +####################################################################################### +## CID Source ## +####################################################################################### +account.1.cid_source = +account.1.cid_source_privacy = +account.1.cid_source_ppi = +account.1.cp_source = + +####################################################################################### +## Session Timer ## +####################################################################################### +account.1.session_timer.enable = +account.1.session_timer.expires = +account.1.session_timer.refresher = + +####################################################################################### +## Music on Hold ## +####################################################################################### +##It configures the way on how the phone processes Music On Hold when placing an active call on hold for account X. +##0-Calling the music server before holding +##1-Calling the music server after holding +##The default value is 0. +account.1.music_on_hold_type = + +##It configures the URI of the Music On Hold server for account X. +##The default value is blank. +account.1.music_server_uri = + +####################################################################################### +## Advanced ## +####################################################################################### +account.1.auto_answer = +account.1.missed_calllog = +account.1.100rel_enable = +account.1.enable_user_equal_phone = +account.1.compact_header_enable = + +####################################################################################### +## DND(Except T19 Model) ## +####################################################################################### +account.1.dnd.enable = +account.1.dnd.on_code = +account.1.dnd.off_code = + +####################################################################################### +## Call Forward(Except T19 Model) ## +####################################################################################### +account.1.always_fwd.enable = +account.1.always_fwd.target = +account.1.always_fwd.off_code = +account.1.always_fwd.on_code = +account.1.busy_fwd.enable = +account.1.busy_fwd.target = +account.1.busy_fwd.off_code = +account.1.busy_fwd.on_code = +account.1.timeout_fwd.enable = +account.1.timeout_fwd.target = +account.1.timeout_fwd.timeout = +account.1.timeout_fwd.off_code = +account.1.timeout_fwd.on_code = + +####################################################################################### +## Voice Monitoring (Except T19P/T21P Models) ## +####################################################################################### +account.1.vq_rtcpxr.collector_name= +account.1.vq_rtcpxr.collector_server_host= +account.1.vq_rtcpxr.collector_server_port= + +####################################################################################### +## Broadsoft Hoteling ## +####################################################################################### +account.1.hoteling.enable = +account.1.hoteling.user_id = +account.1.hoteling.password = +account.1.hoteling.auto_login_enable = + +####################################################################################### +## Broadsoft ACD ## +####################################################################################### +account.1.acd.enable = +account.1.acd.unavailable_reason_enable = +account.1.acd.available = +account.1.acd.initial_state = + +####################################################################################### +## Broadsoft ACD Call Center ## +####################################################################################### +account.1.reason_code.1 = +account.1.reason_code_name.1 = +account.1.bw_disp_code.1 = +account.1.bw_disp_code_name.1 = +account.1.supervisor_info_code.1 = +account.1.supervisor_info_code_name.1 = + +####################################################################################### +## Broadsoft Call Center ## +####################################################################################### +account.1.call_center.call_info_enable = +account.1.call_center.show_call_info_time = +account.1.call_center.disp_code_enable = +account.1.call_center.trace_enable = +account.1.call_center.emergency_enable = +account.1.call_center.queue_status_enable = +account.1.call_center.queue_status_light_enable = + + +####################################################################################### +## Broadsoft XSI ## +####################################################################################### +##It configures the user name for XSI authentication for account X.Example:account.1.xsi.user = 3502@as.iop1.broadworks.net. +##The default value is blank. +account.1.xsi.user = + +##It configures the password for XSI authentication for account X.Example:account.1.xsi.password = 123456. +##The default value is blank. +account.1.xsi.password = + +##It configures the access URL of the Xtended Services Platform server for account X.Example:account.1.xsi.host = xsp1.iop1.broadworks.net. +##The default value is blank. +account.1.xsi.host = + +##It configures the server type of the Xtended Services Platform server for account X.Example:account.1.xsi.server_type = http. +##The default value is http. +account.1.xsi.server_type = + +##It configures the server port of the Xtended Services Platform server for account X.Example:account.1.xsi.port = 80. +##The default value is 80.Integer from 1 to 65535 +account.1.xsi.port = + + + + +####################################################################################### +## Account2 Basic Settings ## +####################################################################################### +account.2.enable = +account.2.label = +account.2.display_name = +account.2.auth_name = +account.2.user_name = +account.2.password = +account.2.outbound_proxy_enable = +account.2.outbound_host = +account.2.outbound_port = +account.2.dial_tone = +account.2.sip_server.1.transport_type = +account.2.sip_server.2.transport_type = + +####################################################################################### +## Failback ## +####################################################################################### +account.2.reregister_enable = +account.2.naptr_build = +account.2.fallback.redundancy_type = +account.2.fallback.timeout = +account.2.sip_server.1.address = +account.2.sip_server.1.port = +account.2.sip_server.1.expires = +account.2.sip_server.1.retry_counts = +account.2.sip_server.1.failback_mode = +account.2.sip_server.1.failback_timeout = +account.2.sip_server.1.register_on_enable = + +account.2.sip_server.2.address = +account.2.sip_server.2.port = +account.2.sip_server.2.expires = +account.2.sip_server.2.retry_counts = +account.2.sip_server.2.failback_mode = +account.2.sip_server.2.failback_timeout = +account.2.sip_server.2.register_on_enable = + + + +account.2.dns_cache_type = +account.2.dns_cache_a.1.name = +account.2.dns_cache_a.1.ip = +account.2.dns_cache_a.1.ttl = +account.2.dns_cache_srv.1.name = +account.2.dns_cache_srv.1.port = +account.2.dns_cache_srv.1.priority = +account.2.dns_cache_srv.1.target = +account.2.dns_cache_srv.1.weight = +account.2.dns_cache_srv.1.ttl = +account.2.dns_cache_naptr.1.name = +account.2.dns_cache_naptr.1.flags = +account.2.dns_cache_naptr.1.order = +account.2.dns_cache_naptr.1.preference = +account.2.dns_cache_naptr.1.replace = +account.2.dns_cache_naptr.1.service = +account.2.dns_cache_naptr.1.ttl = + +account.2.dns_cache_type = +account.2.dns_cache_a.2.name = +account.2.dns_cache_a.2.ip = +account.2.dns_cache_a.2.ttl = +account.2.dns_cache_srv.2.name = +account.2.dns_cache_srv.2.port = +account.2.dns_cache_srv.2.priority = +account.2.dns_cache_srv.2.target = +account.2.dns_cache_srv.2.weight = +account.2.dns_cache_srv.2.ttl = +account.2.dns_cache_naptr.2.name = +account.2.dns_cache_naptr.2.flags = +account.2.dns_cache_naptr.2.order = +account.2.dns_cache_naptr.2.preference = +account.2.dns_cache_naptr.2.replace = +account.2.dns_cache_naptr.2.service = +account.2.dns_cache_naptr.2.ttl = + +account.2.static_cache_pri = +account.2.register_expires_overlap = +account.2.subscribe_expires_overlap = + +####################################################################################### +## Register Advanced ## +####################################################################################### +account.2.sip_server_type = +account.2.unregister_on_reboot = +account.2.proxy_require = +account.2.srv_ttl_timer_enable = +account.2.register_mac = +account.2.register_line = +account.2.reg_fail_retry_interval = + +######################################################################### +## NAT Settings ## +######################################################################### +account.2.nat.nat_traversal = +account.2.nat.stun_server = +account.2.nat.stun_port = +account.2.nat.udp_update_enable = +account.2.nat.udp_update_time = +account.2.nat.rport = + +####################################################################################### +## Account2 Advance Settings ## +####################################################################################### + + +voice_mail.number.2 = +##Except T19P/T21P Models +account.2.auto_dial_enable = +account.2.auto_dial_num = + +account.2.call_id_mode = +account.2.call_info = +##It is the unit at the time of back to the fluid state +account.2.ringback_duration_time = + +####################################################################################### +## Subscribe ## +####################################################################################### +account.2.subscribe_mwi = +account.2.subscribe_mwi_expires = +account.2.subscribe_mwi_to_vm = +account.2.subscribe_acd_expires= +##Except T19P/T21P Models +account.2.display_mwi.enable = +##It is configuration MWI is NOTIFY messages, whether in Terminated status attributes. +##The default value is 0(Don't handle terminated values) +account.2.mwi_parse_terminated = + +account.2.display_mwi.enable = + +####################################################################################### +## BLF List(Except T19D Model) ## +####################################################################################### + +account.2.blf.blf_list_uri = +account.2.blf_list_code = +account.2.blf_list_barge_in_code = +account.2.blf.subscribe_period = +account.2.blf.subscribe_event = +account.2.out_dialog_blf_enable = + +####################################################################################### +## BLA/SCA ## +####################################################################################### +account.2.shared_line = +account.2.bla_number = +account.2.bla_subscribe_period = +##It configures the Call Pull Feature access code for account X. +##The default value is blank. +account.2.shared_line_callpull_code = +##It configures number of linekey for SCA. +##The default value is 1. +account.2.shared_line_number_of_linekey = +####################################################################################### +## Brosoft Callpark ## +####################################################################################### +##It enables or disables Broadsoft Callpark for account X.0-Disabled,1-Broadsoft SCA. +##The default value is 0. +account.2.callpark_enable = + +####################################################################################### +## Audio Codec ## +####################################################################################### +###T19D/T21D support codec1~codec8 +###T20P/T22P/T26P/T28P/T41P/T42G/T46G support codec1~codec11 + +account.2.codec.1.enable = +account.2.codec.1.payload_type = +account.2.codec.1.priority = +account.2.codec.1.rtpmap = + +account.2.codec.2.enable = +account.2.codec.2.payload_type = +account.2.codec.2.priority = +account.2.codec.2.rtpmap = + +account.2.codec.3.enable = +account.2.codec.3.payload_type = +account.2.codec.3.priority = +account.2.codec.3.rtpmap = + +account.2.codec.4.enable = +account.2.codec.4.payload_type = +account.2.codec.4.priority = +account.2.codec.4.rtpmap = + +account.2.codec.5.enable = +account.2.codec.5.payload_type = +account.2.codec.5.priority = +account.2.codec.5.rtpmap = + +account.2.codec.6.enable = +account.2.codec.6.payload_type = +account.2.codec.6.priority = +account.2.codec.6.rtpmap = + +account.2.codec.7.enable = +account.2.codec.7.payload_type = +account.2.codec.7.priority = +account.2.codec.7.rtpmap = + +account.2.codec.8.enable = +account.2.codec.8.payload_type = +account.2.codec.8.priority = +account.2.codec.8.rtpmap = + +account.2.codec.9.enable = +account.2.codec.9.payload_type = +account.2.codec.9.priority = +account.2.codec.9.rtpmap = + +account.2.codec.10.enable = +account.2.codec.10.payload_type = +account.2.codec.10.priority = +account.2.codec.10.rtpmap = + +account.2.codec.11.enable = +account.2.codec.11.payload_type = +account.2.codec.11.priority = +account.2.codec.11.rtpmap = + + + +####################################################################################### +## Audio Advanced ## +####################################################################################### +account.2.srtp_encryption = +account.2.ptime = + +## The default value is 0(Take a SRTP all encryption).1:Only carry AES - 80 secret key,2: Only carry AES - 32 secret key +account.2.srtp_auth_tag_mode = +####################################################################################### +## Anonymous Call ## +####################################################################################### +account.2.send_anonymous_code = +account.2.anonymous_call = +account.2.anonymous_call_oncode = +account.2.anonymous_call_offcode = +account.2.reject_anonymous_call = +account.2.anonymous_reject_oncode = +account.2.anonymous_reject_offcode = +account.2.send_anonymous_rejection_code = + +####################################################################################### +## Pickup Code ## +####################################################################################### +account.2.dialoginfo_callpickup = +account.2.group_pickup_code = +account.2.direct_pickup_code = + +####################################################################################### +## DTMF ## +####################################################################################### +account.2.dtmf.type = +account.2.dtmf.info_type = +account.2.dtmf.dtmf_payload = + +####################################################################################### +## Alert info ## +####################################################################################### +account.2.alert_info_url_enable = +account.2.ringtone.ring_type = + +###Only for T46G Model +account.2.picture_info_enable = +##Except T19P/T21P Models +##The default value is blank.Values range 256 characters in length +account.2.alert_info = + +####################################################################################### +## Conference ## +####################################################################################### +account.2.conf_type = +account.2.conf_uri = + +####################################################################################### +## CID Source ## +####################################################################################### +account.2.cid_source = +account.2.cid_source_privacy = +account.2.cid_source_ppi = +account.2.cp_source = + +####################################################################################### +## Session Timer ## +####################################################################################### +account.2.session_timer.enable = +account.2.session_timer.expires = +account.2.session_timer.refresher = + +####################################################################################### +## Music on Hold ## +####################################################################################### +account.2.music_on_hold_type = +account.2.music_server_uri = + +####################################################################################### +## Advanced ## +####################################################################################### +account.2.auto_answer = +account.2.missed_calllog = +account.2.100rel_enable = +account.2.enable_user_equal_phone = +account.2.compact_header_enable = + +####################################################################################### +## DND(Except T19 Model) ## +####################################################################################### +account.2.dnd.enable = +account.2.dnd.on_code = +account.2.dnd.off_code = + +####################################################################################### +## Call Forward(Except T19 Model) ## +####################################################################################### +account.2.always_fwd.enable = +account.2.always_fwd.target = +account.2.always_fwd.off_code = +account.2.always_fwd.on_code = +account.2.busy_fwd.enable = +account.2.busy_fwd.target = +account.2.busy_fwd.off_code = +account.2.busy_fwd.on_code = +account.2.timeout_fwd.enable = +account.2.timeout_fwd.target = +account.2.timeout_fwd.timeout = +account.2.timeout_fwd.off_code = +account.2.timeout_fwd.on_code = + +####################################################################################### +## Voice Monitoring (Except T19P/T21P Models) ## +####################################################################################### +account.2.vq_rtcpxr.collector_name= +account.2.vq_rtcpxr.collector_server_host= +account.2.vq_rtcpxr.collector_server_port= +####################################################################################### +## Broadsoft Hoteling ## +####################################################################################### +account.2.hoteling.enable = +account.2.hoteling.user_id = +account.2.hoteling.password = +account.2.hoteling.auto_login_enable = + +####################################################################################### +## Broadsoft ACD ## +####################################################################################### +account.2.acd.enable = +account.2.acd.unavailable_reason_enable = +account.2.acd.available = +account.2.acd.initial_state = + +####################################################################################### +## Broadsoft ACD Call Center ## +####################################################################################### +account.2.reason_code.1 = +account.2.reason_code_name.1 = +account.2.bw_disp_code.1 = +account.2.bw_disp_code_name.1 = +account.2.supervisor_info_code.1 = +account.2.supervisor_info_code_name.1 = + +####################################################################################### +## Broadsoft Call Center ## +####################################################################################### +account.2.call_center.call_info_enable = +account.2.call_center.show_call_info_time = +account.2.call_center.disp_code_enable = +account.2.call_center.trace_enable = +account.2.call_center.emergency_enable = +account.2.call_center.queue_status_enable = +account.2.call_center.queue_status_light_enable = + +####################################################################################### +## Broadsoft XSI ## +####################################################################################### +##It configures the user name for XSI authentication for account X.Example:account.1.xsi.user = 3502@as.iop1.broadworks.net. +##The default value is blank. +account.2.xsi.user = + +##It configures the password for XSI authentication for account X.Example:account.1.xsi.password = 123456. +##The default value is blank. +account.2.xsi.password = + +##It configures the access URL of the Xtended Services Platform server for account X.Example:account.1.xsi.host = xsp1.iop1.broadworks.net. +##The default value is blank. +account.2.xsi.host = + +##It configures the server type of the Xtended Services Platform server for account X.Example:account.1.xsi.server_type = http. +##The default value is http. +account.2.xsi.server_type = + +##It configures the server port of the Xtended Services Platform server for account X.Example:account.1.xsi.port = 80. +##The default value is 80.Integer from 1 to 65535 +account.2.xsi.port = + + + +####################################################################################### +## Account3 Basic Settings ## +####################################################################################### +account.3.enable = +account.3.label = +account.3.display_name = +account.3.auth_name = +account.3.user_name = +account.3.password = +account.3.outbound_proxy_enable = +account.3.outbound_host = +account.3.outbound_port = +account.3.dial_tone = +account.3.sip_server.1.transport_type = +account.3.sip_server.2.transport_type = + +####################################################################################### +## Failback ## +####################################################################################### +account.3.reregister_enable = +account.3.naptr_build = +account.3.fallback.redundancy_type = +account.3.fallback.timeout = +account.3.sip_server.1.address = +account.3.sip_server.1.port = +account.3.sip_server.1.expires = +account.3.sip_server.1.retry_counts = +account.3.sip_server.1.failback_mode = +account.3.sip_server.1.failback_timeout = +account.3.sip_server.1.register_on_enable = + +account.3.sip_server.2.address = +account.3.sip_server.2.port = +account.3.sip_server.2.expires = +account.3.sip_server.2.retry_counts = +account.3.sip_server.2.failback_mode = +account.3.sip_server.2.failback_timeout = +account.3.sip_server.2.register_on_enable = + + +account.3.dns_cache_type = +account.3.dns_cache_a.1.name = +account.3.dns_cache_a.1.ip = +account.3.dns_cache_a.1.ttl = +account.3.dns_cache_srv.1.name = +account.3.dns_cache_srv.1.port = +account.3.dns_cache_srv.1.priority = +account.3.dns_cache_srv.1.target = +account.3.dns_cache_srv.1.weight = +account.3.dns_cache_srv.1.ttl = +account.3.dns_cache_naptr.1.name = +account.3.dns_cache_naptr.1.flags = +account.3.dns_cache_naptr.1.order = +account.3.dns_cache_naptr.1.preference = +account.3.dns_cache_naptr.1.replace = +account.3.dns_cache_naptr.1.service = +account.3.dns_cache_naptr.1.ttl = + +account.3.dns_cache_type = +account.3.dns_cache_a.2.name = +account.3.dns_cache_a.2.ip = +account.3.dns_cache_a.2.ttl = +account.3.dns_cache_srv.2.name = +account.3.dns_cache_srv.2.port = +account.3.dns_cache_srv.2.priority = +account.3.dns_cache_srv.2.target = +account.3.dns_cache_srv.2.weight = +account.3.dns_cache_srv.2.ttl = +account.3.dns_cache_naptr.2.name = +account.3.dns_cache_naptr.2.flags = +account.3.dns_cache_naptr.2.order = +account.3.dns_cache_naptr.2.preference = +account.3.dns_cache_naptr.2.replace = +account.3.dns_cache_naptr.2.service = +account.3.dns_cache_naptr.2.ttl = + +account.3.static_cache_pri = +account.3.register_expires_overlap = +account.3.subscribe_expires_overlap = + +####################################################################################### +## Register Advanced ## +####################################################################################### +account.3.sip_server_type = +account.3.unregister_on_reboot = +account.3.proxy_require = +account.3.srv_ttl_timer_enable = +account.3.register_mac = +account.3.register_line = +account.3.reg_fail_retry_interval = + +######################################################################### +## NAT Settings ## +######################################################################### +account.3.nat.nat_traversal = +account.3.nat.stun_server = +account.3.nat.stun_port = +account.3.nat.udp_update_enable = +account.3.nat.udp_update_time = +account.3.nat.rport = + +####################################################################################### +## Account3 Advance Settings ## +####################################################################################### + + +voice_mail.number.3 = +##Except T19P/T21P Models +account.3.auto_dial_enable = +account.3.auto_dial_num = + +account.3.call_id_mode = +account.3.call_info = +##It is the unit at the time of back to the fluid state +account.3.ringback_duration_time = + +####################################################################################### +## Subscribe ## +####################################################################################### +account.3.subscribe_mwi = +account.3.subscribe_mwi_expires = +account.3.subscribe_mwi_to_vm = +account.3.subscribe_acd_expires= +##Except T19P/T21P Models +account.3.display_mwi.enable = +##It is configuration MWI is NOTIFY messages, whether in Terminated status attributes. +##The default value is 0(Don't handle terminated values) +account.3.mwi_parse_terminated = + +account.3.display_mwi.enable = + +####################################################################################### +## BLF List(Except T19D Model) ## +####################################################################################### +account.3.blf.blf_list_uri = +account.3.blf_list_code = +account.3.blf_list_barge_in_code = +account.3.blf.subscribe_period = +account.3.blf.subscribe_event = +account.3.out_dialog_blf_enable = + +####################################################################################### +## BLA/SCA ## +####################################################################################### +account.3.shared_line = +account.3.bla_number = +account.3.bla_subscribe_period = +##It configures the Call Pull Feature access code for account X. +##The default value is blank. +account.3.shared_line_callpull_code = +##It configures number of linekey for SCA. +##The default value is 1. +account.3.shared_line_number_of_linekey = +####################################################################################### +## Brosoft Callpark ## +####################################################################################### +##It enables or disables Broadsoft Callpark for account X.0-Disabled,1-Broadsoft SCA. +##The default value is 0. +account.3.callpark_enable = + +####################################################################################### +## Audio Codec ## +####################################################################################### +###T19D/T21D support codec1~codec8 +###T20P/T22P/T26P/T28P/T41P/T42G/T46G support codec1~codec11 + +account.3.codec.1.enable = +account.3.codec.1.payload_type = +account.3.codec.1.priority = +account.3.codec.1.rtpmap = + +account.3.codec.2.enable = +account.3.codec.2.payload_type = +account.3.codec.2.priority = +account.3.codec.2.rtpmap = + +account.3.codec.3.enable = +account.3.codec.3.payload_type = +account.3.codec.3.priority = +account.3.codec.3.rtpmap = + +account.3.codec.4.enable = +account.3.codec.4.payload_type = +account.3.codec.4.priority = +account.3.codec.4.rtpmap = + +account.3.codec.5.enable = +account.3.codec.5.payload_type = +account.3.codec.5.priority = +account.3.codec.5.rtpmap = + +account.3.codec.6.enable = +account.3.codec.6.payload_type = +account.3.codec.6.priority = +account.3.codec.6.rtpmap = + +account.3.codec.7.enable = +account.3.codec.7.payload_type = +account.3.codec.7.priority = +account.3.codec.7.rtpmap = + +account.3.codec.8.enable = +account.3.codec.8.payload_type = +account.3.codec.8.priority = +account.3.codec.8.rtpmap = + +account.3.codec.9.enable = +account.3.codec.9.payload_type = +account.3.codec.9.priority = +account.3.codec.9.rtpmap = + +account.3.codec.10.enable = +account.3.codec.10.payload_type = +account.3.codec.10.priority = +account.3.codec.10.rtpmap = + +account.3.codec.11.enable = +account.3.codec.11.payload_type = +account.3.codec.11.priority = +account.3.codec.11.rtpmap = + + + +####################################################################################### +## Audio Advanced ## +####################################################################################### +account.3.srtp_encryption = +account.3.ptime = + +## The default value is 0(Take a SRTP all encryption).1:Only carry AES - 80 secret key,2: Only carry AES - 32 secret key +account.3.srtp_auth_tag_mode = + +####################################################################################### +## Anonymous Call ## +####################################################################################### +account.3.send_anonymous_code = +account.3.anonymous_call = +account.3.anonymous_call_oncode = +account.3.anonymous_call_offcode = +account.3.reject_anonymous_call = +account.3.anonymous_reject_oncode = +account.3.anonymous_reject_offcode = +account.3.send_anonymous_rejection_code = + +####################################################################################### +## Pickup Code ## +####################################################################################### +account.3.dialoginfo_callpickup = +account.3.group_pickup_code = +account.3.direct_pickup_code = + +####################################################################################### +## DTMF ## +####################################################################################### +account.3.dtmf.type = +account.3.dtmf.info_type = +account.3.dtmf.dtmf_payload = + +####################################################################################### +## Alert info ## +####################################################################################### +account.3.alert_info_url_enable = +account.3.ringtone.ring_type = + +###Only for T46G Model +account.3.picture_info_enable = +##Except T19P/T21P Models +##The default value is blank.Values range 256 characters in length +account.3.alert_info = + +####################################################################################### +## Conference ## +####################################################################################### +account.3.conf_type = +account.3.conf_uri = + +####################################################################################### +## CID Source ## +####################################################################################### +account.3.cid_source = +account.3.cid_source_privacy = +account.3.cid_source_ppi = +account.3.cp_source = + +####################################################################################### +## Session Timer ## +####################################################################################### +account.3.session_timer.enable = +account.3.session_timer.expires = +account.3.session_timer.refresher = + +####################################################################################### +## Music on Hold ## +####################################################################################### +account.3.music_on_hold_type = +account.3.music_server_uri = + +####################################################################################### +## Advanced ## +####################################################################################### +account.3.auto_answer = +account.3.missed_calllog = +account.3.100rel_enable = +account.3.enable_user_equal_phone = +account.3.compact_header_enable = + +####################################################################################### +## DND(Except T19 Model) ## +####################################################################################### +account.3.dnd.enable = +account.3.dnd.on_code = +account.3.dnd.off_code = + +####################################################################################### +## Call Forward(Except T19 Model) ## +####################################################################################### +account.3.always_fwd.enable = +account.3.always_fwd.target = +account.3.always_fwd.off_code = +account.3.always_fwd.on_code = +account.3.busy_fwd.enable = +account.3.busy_fwd.target = +account.3.busy_fwd.off_code = +account.3.busy_fwd.on_code = +account.3.timeout_fwd.enable = +account.3.timeout_fwd.target = +account.3.timeout_fwd.timeout = +account.3.timeout_fwd.off_code = +account.3.timeout_fwd.on_code = + +####################################################################################### +## Voice Monitoring (Except T19P/T21P Models) ## +####################################################################################### +account.3.vq_rtcpxr.collector_name= +account.3.vq_rtcpxr.collector_server_host= +account.3.vq_rtcpxr.collector_server_port= +####################################################################################### +## Broadsoft Hoteling ## +####################################################################################### +account.3.hoteling.enable = +account.3.hoteling.user_id = +account.3.hoteling.password = +account.3.hoteling.auto_login_enable = + +####################################################################################### +## Broadsoft ACD ## +####################################################################################### +account.3.acd.enable = +account.3.acd.unavailable_reason_enable = +account.3.acd.available = +account.3.acd.initial_state = + +####################################################################################### +## Broadsoft ACD Call Center ## +####################################################################################### +account.3.reason_code.1 = +account.3.reason_code_name.1 = +account.3.bw_disp_code.1 = +account.3.bw_disp_code_name.1 = +account.3.supervisor_info_code.1 = +account.3.supervisor_info_code_name.1 = + +####################################################################################### +## Broadsoft Call Center ## +####################################################################################### +account.3.call_center.call_info_enable = +account.3.call_center.show_call_info_time = +account.3.call_center.disp_code_enable = +account.3.call_center.trace_enable = +account.3.call_center.emergency_enable = +account.3.call_center.queue_status_enable = +account.3.call_center.queue_status_light_enable = + +####################################################################################### +## Broadsoft XSI ## +####################################################################################### +##It configures the user name for XSI authentication for account X.Example:account.1.xsi.user = 3502@as.iop1.broadworks.net. +##The default value is blank. +account.3.xsi.user = + +##It configures the password for XSI authentication for account X.Example:account.1.xsi.password = 123456. +##The default value is blank. +account.3.xsi.password = + +##It configures the access URL of the Xtended Services Platform server for account X.Example:account.1.xsi.host = xsp1.iop1.broadworks.net. +##The default value is blank. +account.3.xsi.host = + +##It configures the server type of the Xtended Services Platform server for account X.Example:account.1.xsi.server_type = http. +##The default value is http. +account.3.xsi.server_type = + +##It configures the server port of the Xtended Services Platform server for account X.Example:account.1.xsi.port = 80. +##The default value is 80.Integer from 1 to 65535 +account.3.xsi.port = + + + +####################################################################################### +## Account4 Basic Settings ## +####################################################################################### +account.4.enable = +account.4.label = +account.4.display_name = +account.4.auth_name = +account.4.user_name = +account.4.password = +account.4.outbound_proxy_enable = +account.4.outbound_host = +account.4.outbound_port = +account.4.dial_tone = +account.4.sip_server.1.transport_type = +account.4.sip_server.2.transport_type = + +####################################################################################### +## Failback ## +####################################################################################### +account.4.reregister_enable = +account.4.naptr_build = +account.4.fallback.redundancy_type = +account.4.fallback.timeout = +account.4.sip_server.1.address = +account.4.sip_server.1.port = +account.4.sip_server.1.expires = +account.4.sip_server.1.retry_counts = +account.4.sip_server.1.failback_mode = +account.4.sip_server.1.failback_timeout = +account.4.sip_server.1.register_on_enable = + +account.4.sip_server.2.address = +account.4.sip_server.2.port = +account.4.sip_server.2.expires = +account.4.sip_server.2.retry_counts = +account.4.sip_server.2.failback_mode = +account.4.sip_server.2.failback_timeout = +account.4.sip_server.2.register_on_enable = + + +account.4.dns_cache_type = +account.4.dns_cache_a.1.name = +account.4.dns_cache_a.1.ip = +account.4.dns_cache_a.1.ttl = +account.4.dns_cache_srv.1.name = +account.4.dns_cache_srv.1.port = +account.4.dns_cache_srv.1.priority = +account.4.dns_cache_srv.1.target = +account.4.dns_cache_srv.1.weight = +account.4.dns_cache_srv.1.ttl = +account.4.dns_cache_naptr.1.name = +account.4.dns_cache_naptr.1.flags = +account.4.dns_cache_naptr.1.order = +account.4.dns_cache_naptr.1.preference = +account.4.dns_cache_naptr.1.replace = +account.4.dns_cache_naptr.1.service = +account.4.dns_cache_naptr.1.ttl = + +account.4.dns_cache_type = +account.4.dns_cache_a.2.name = +account.4.dns_cache_a.2.ip = +account.4.dns_cache_a.2.ttl = +account.4.dns_cache_srv.2.name = +account.4.dns_cache_srv.2.port = +account.4.dns_cache_srv.2.priority = +account.4.dns_cache_srv.2.target = +account.4.dns_cache_srv.2.weight = +account.4.dns_cache_srv.2.ttl = +account.4.dns_cache_naptr.2.name = +account.4.dns_cache_naptr.2.flags = +account.4.dns_cache_naptr.2.order = +account.4.dns_cache_naptr.2.preference = +account.4.dns_cache_naptr.2.replace = +account.4.dns_cache_naptr.2.service = +account.4.dns_cache_naptr.2.ttl = + +account.4.static_cache_pri = +account.4.register_expires_overlap = +account.4.subscribe_expires_overlap = + +####################################################################################### +## Register Advanced ## +####################################################################################### +account.4.sip_server_type = +account.4.unregister_on_reboot = +account.4.proxy_require = +account.4.srv_ttl_timer_enable = +account.4.register_mac = +account.4.register_line = +account.4.reg_fail_retry_interval = + +######################################################################### +## NAT Settings ## +######################################################################### +account.4.nat.nat_traversal = +account.4.nat.stun_server = +account.4.nat.stun_port = +account.4.nat.udp_update_enable = +account.4.nat.udp_update_time = +account.4.nat.rport = + +####################################################################################### +## Account4 Advance Settings ## +####################################################################################### + +voice_mail.number.4 = +##Except T19P/T21P Models +account.4.auto_dial_enable = +account.4.auto_dial_num = + +account.4.call_id_mode = +account.4.call_info = +##It is the unit at the time of back to the fluid state +account.4.ringback_duration_time = + +####################################################################################### +## Subscribe ## +####################################################################################### +account.4.subscribe_mwi = +account.4.subscribe_mwi_expires = +account.4.subscribe_mwi_to_vm = +account.4.subscribe_acd_expires= +##Except T19P/T21P Models +account.4.display_mwi.enable = +##It is configuration MWI is NOTIFY messages, whether in Terminated status attributes. +##The default value is 0(Don't handle terminated values) +account.4.mwi_parse_terminated = + +account.4.display_mwi.enable = + +####################################################################################### +## BLF List(Except T19D Model) ## +####################################################################################### +account.4.blf.blf_list_uri = +account.4.blf_list_code = +account.4.blf_list_barge_in_code = +account.4.blf.subscribe_period = +account.4.blf.subscribe_event = +account.4.out_dialog_blf_enable = + +####################################################################################### +## BLA/SCA ## +####################################################################################### +account.4.shared_line = +account.4.bla_number = +account.4.bla_subscribe_period = +##It configures the Call Pull Feature access code for account X. +##The default value is blank. +account.4.shared_line_callpull_code = +##It configures number of linekey for SCA. +##The default value is 1. +account.4.shared_line_number_of_linekey = +####################################################################################### +## Brosoft Callpark ## +####################################################################################### +##It enables or disables Broadsoft Callpark for account X.0-Disabled,1-Broadsoft SCA. +##The default value is 0. +account.4.callpark_enable = + +####################################################################################### +## Audio Codec ## +####################################################################################### +###T19D/T21D support codec1~codec8 +###T20P/T22P/T26P/T28P/T41P/T42G/T46G support codec1~codec11 + +account.4.codec.1.enable = +account.4.codec.1.payload_type = +account.4.codec.1.priority = +account.4.codec.1.rtpmap = + +account.4.codec.2.enable = +account.4.codec.2.payload_type = +account.4.codec.2.priority = +account.4.codec.2.rtpmap = + +account.4.codec.3.enable = +account.4.codec.3.payload_type = +account.4.codec.3.priority = +account.4.codec.3.rtpmap = + +account.4.codec.4.enable = +account.4.codec.4.payload_type = +account.4.codec.4.priority = +account.4.codec.4.rtpmap = + +account.4.codec.5.enable = +account.4.codec.5.payload_type = +account.4.codec.5.priority = +account.4.codec.5.rtpmap = + +account.4.codec.6.enable = +account.4.codec.6.payload_type = +account.4.codec.6.priority = +account.4.codec.6.rtpmap = + +account.4.codec.7.enable = +account.4.codec.7.payload_type = +account.4.codec.7.priority = +account.4.codec.7.rtpmap = + +account.4.codec.8.enable = +account.4.codec.8.payload_type = +account.4.codec.8.priority = +account.4.codec.8.rtpmap = + +account.4.codec.9.enable = +account.4.codec.9.payload_type = +account.4.codec.9.priority = +account.4.codec.9.rtpmap = + +account.4.codec.10.enable = +account.4.codec.10.payload_type = +account.4.codec.10.priority = +account.4.codec.10.rtpmap = + +account.4.codec.11.enable = +account.4.codec.11.payload_type = +account.4.codec.11.priority = +account.4.codec.11.rtpmap = + + +####################################################################################### +## Audio Advanced ## +####################################################################################### +account.4.srtp_encryption = +account.4.ptime = + +## The default value is 0(Take a SRTP all encryption).1:Only carry AES - 80 secret key,2: Only carry AES - 32 secret key +account.4.srtp_auth_tag_mode = + +####################################################################################### +## Anonymous Call ## +####################################################################################### +account.4.send_anonymous_code = +account.4.anonymous_call = +account.4.anonymous_call_oncode = +account.4.anonymous_call_offcode = +account.4.reject_anonymous_call = +account.4.anonymous_reject_oncode = +account.4.anonymous_reject_offcode = +account.4.send_anonymous_rejection_code = + +####################################################################################### +## Pickup Code ## +####################################################################################### +account.4.dialoginfo_callpickup = +account.4.group_pickup_code = +account.4.direct_pickup_code = + +####################################################################################### +## DTMF ## +####################################################################################### +account.4.dtmf.type = +account.4.dtmf.info_type = +account.4.dtmf.dtmf_payload = + +####################################################################################### +## Alert info ## +####################################################################################### +account.4.alert_info_url_enable = +account.4.ringtone.ring_type = + +###Only for T46G Model +account.4.picture_info_enable = +##Except T19P/T21P Models +##The default value is blank.Values range 256 characters in length +account.4.alert_info = + +####################################################################################### +## Conference ## +####################################################################################### +account.4.conf_type = +account.4.conf_uri = + +####################################################################################### +## CID Source ## +####################################################################################### +account.4.cid_source = +account.4.cid_source_privacy = +account.4.cid_source_ppi = +account.4.cp_source = + +####################################################################################### +## Session Timer ## +####################################################################################### +account.4.session_timer.enable = +account.4.session_timer.expires = +account.4.session_timer.refresher = + +####################################################################################### +## Music on Hold ## +####################################################################################### +account.4.music_on_hold_type = +account.4.music_server_uri = + +####################################################################################### +## Advanced ## +####################################################################################### +account.4.auto_answer = +account.4.missed_calllog = +account.4.100rel_enable = +account.4.enable_user_equal_phone = +account.4.compact_header_enable = + +####################################################################################### +## DND(Except T19 Model) ## +####################################################################################### +account.4.dnd.enable = +account.4.dnd.on_code = +account.4.dnd.off_code = + +####################################################################################### +## Call Forward(Except T19 Model) ## +####################################################################################### +account.4.always_fwd.enable = +account.4.always_fwd.target = +account.4.always_fwd.off_code = +account.4.always_fwd.on_code = +account.4.busy_fwd.enable = +account.4.busy_fwd.target = +account.4.busy_fwd.off_code = +account.4.busy_fwd.on_code = +account.4.timeout_fwd.enable = +account.4.timeout_fwd.target = +account.4.timeout_fwd.timeout = +account.4.timeout_fwd.off_code = +account.4.timeout_fwd.on_code = + +####################################################################################### +## Voice Monitoring (Except T19P/T21P Models) ## +####################################################################################### +account.4.vq_rtcpxr.collector_name= +account.4.vq_rtcpxr.collector_server_host= +account.4.vq_rtcpxr.collector_server_port= +####################################################################################### +## Broadsoft Hoteling ## +####################################################################################### +account.4.hoteling.enable = +account.4.hoteling.user_id = +account.4.hoteling.password = +account.4.hoteling.auto_login_enable = + +####################################################################################### +## Broadsoft ACD ## +####################################################################################### +account.4.acd.enable = +account.4.acd.unavailable_reason_enable = +account.4.acd.available = +account.4.acd.initial_state = + +####################################################################################### +## Broadsoft ACD Call Center ## +####################################################################################### +account.4.reason_code.1 = +account.4.reason_code_name.1 = +account.4.bw_disp_code.1 = +account.4.bw_disp_code_name.1 = +account.4.supervisor_info_code.1 = +account.4.supervisor_info_code_name.1 = + +####################################################################################### +## Broadsoft Call Center ## +####################################################################################### +account.4.call_center.call_info_enable = +account.4.call_center.show_call_info_time = +account.4.call_center.disp_code_enable = +account.4.call_center.trace_enable = +account.4.call_center.emergency_enable = +account.4.call_center.queue_status_enable = +account.4.call_center.queue_status_light_enable = +####################################################################################### +## Broadsoft XSI ## +####################################################################################### +##It configures the user name for XSI authentication for account X.Example:account.1.xsi.user = 3502@as.iop1.broadworks.net. +##The default value is blank. +account.4.xsi.user = + +##It configures the password for XSI authentication for account X.Example:account.1.xsi.password = 123456. +##The default value is blank. +account.4.xsi.password = + +##It configures the access URL of the Xtended Services Platform server for account X.Example:account.1.xsi.host = xsp1.iop1.broadworks.net. +##The default value is blank. +account.4.xsi.host = + +##It configures the server type of the Xtended Services Platform server for account X.Example:account.1.xsi.server_type = http. +##The default value is http. +account.4.xsi.server_type = + +##It configures the server port of the Xtended Services Platform server for account X.Example:account.1.xsi.port = 80. +##The default value is 80.Integer from 1 to 65535 +account.4.xsi.port = + + +####################################################################################### +## Account5 Basic Settings ## +####################################################################################### +account.5.enable = +account.5.label = +account.5.display_name = +account.5.auth_name = +account.5.user_name = +account.5.password = +account.5.outbound_proxy_enable = +account.5.outbound_host = +account.5.outbound_port = +account.5.dial_tone = +account.5.sip_server.1.transport_type = +account.5.sip_server.2.transport_type = + +####################################################################################### +## Failback ## +####################################################################################### +account.5.reregister_enable = +account.5.naptr_build = +account.5.fallback.redundancy_type = +account.5.fallback.timeout = +account.5.sip_server.1.address = +account.5.sip_server.1.port = +account.5.sip_server.1.expires = +account.5.sip_server.1.retry_counts = +account.5.sip_server.1.failback_mode = +account.5.sip_server.1.failback_timeout = +account.5.sip_server.1.register_on_enable = + +account.5.sip_server.2.address = +account.5.sip_server.2.port = +account.5.sip_server.2.expires = +account.5.sip_server.2.retry_counts = +account.5.sip_server.2.failback_mode = +account.5.sip_server.2.failback_timeout = +account.5.sip_server.2.register_on_enable = + + +account.5.dns_cache_type = +account.5.dns_cache_a.1.name = +account.5.dns_cache_a.1.ip = +account.5.dns_cache_a.1.ttl = +account.5.dns_cache_srv.1.name = +account.5.dns_cache_srv.1.port = +account.5.dns_cache_srv.1.priority = +account.5.dns_cache_srv.1.target = +account.5.dns_cache_srv.1.weight = +account.5.dns_cache_srv.1.ttl = +account.5.dns_cache_naptr.1.name = +account.5.dns_cache_naptr.1.flags = +account.5.dns_cache_naptr.1.order = +account.5.dns_cache_naptr.1.preference = +account.5.dns_cache_naptr.1.replace = +account.5.dns_cache_naptr.1.service = +account.5.dns_cache_naptr.1.ttl = + +account.5.dns_cache_type = +account.5.dns_cache_a.2.name = +account.5.dns_cache_a.2.ip = +account.5.dns_cache_a.2.ttl = +account.5.dns_cache_srv.2.name = +account.5.dns_cache_srv.2.port = +account.5.dns_cache_srv.2.priority = +account.5.dns_cache_srv.2.target = +account.5.dns_cache_srv.2.weight = +account.5.dns_cache_srv.2.ttl = +account.5.dns_cache_naptr.2.name = +account.5.dns_cache_naptr.2.flags = +account.5.dns_cache_naptr.2.order = +account.5.dns_cache_naptr.2.preference = +account.5.dns_cache_naptr.2.replace = +account.5.dns_cache_naptr.2.service = +account.5.dns_cache_naptr.2.ttl = + +account.5.static_cache_pri = +account.5.register_expires_overlap = +account.5.subscribe_expires_overlap = + +####################################################################################### +## Register Advanced ## +####################################################################################### +account.5.sip_server_type = +account.5.unregister_on_reboot = +account.5.proxy_require = +account.5.srv_ttl_timer_enable = +account.5.register_mac = +account.5.register_line = +account.5.reg_fail_retry_interval = + +######################################################################### +## NAT Settings ## +######################################################################### +account.5.nat.nat_traversal = +account.5.nat.stun_server = +account.5.nat.stun_port = +account.5.nat.udp_update_enable = +account.5.nat.udp_update_time = +account.5.nat.rport = + +####################################################################################### +## Account5 Advance Settings ## +####################################################################################### + + +voice_mail.number.5 = +##Except T19P/T21P Models +account.5.auto_dial_enable = +account.5.auto_dial_num = + +account.5.call_id_mode = +account.5.call_info = +##It is the unit at the time of back to the fluid state +account.5.ringback_duration_time = + +####################################################################################### +## Subscribe ## +####################################################################################### +account.5.subscribe_mwi = +account.5.subscribe_mwi_expires = +account.5.subscribe_mwi_to_vm = +account.5.subscribe_acd_expires= +##Except T19P/T21P Models +account.5.display_mwi.enable = +##It is configuration MWI is NOTIFY messages, whether in Terminated status attributes. +##The default value is 0(Don't handle terminated values) +account.5.mwi_parse_terminated = + +account.5.display_mwi.enable = + +####################################################################################### +## BLF List(Except T19D Model) ## +####################################################################################### + +account.5.blf.blf_list_uri = +account.5.blf_list_code = +account.5.blf_list_barge_in_code = +account.5.blf.subscribe_period = +account.5.blf.subscribe_event = +account.5.out_dialog_blf_enable = + +####################################################################################### +## BLA/SCA ## +####################################################################################### +account.5.shared_line = +account.5.bla_number = +account.5.bla_subscribe_period = +##It configures the Call Pull Feature access code for account X. +##The default value is blank. +account.5.shared_line_callpull_code = +##It configures number of linekey for SCA. +##The default value is 1. +account.5.shared_line_number_of_linekey = +####################################################################################### +## Brosoft Callpark ## +####################################################################################### +##It enables or disables Broadsoft Callpark for account X.0-Disabled,1-Broadsoft SCA. +##The default value is 0. +account.5.callpark_enable = + +####################################################################################### +## Audio Codec ## +####################################################################################### +###T19D/T21D support codec1~codec8 +###T20P/T22P/T26P/T28P/T41P/T42G/T46G support codec1~codec11 + +account.5.codec.1.enable = +account.5.codec.1.payload_type = +account.5.codec.1.priority = +account.5.codec.1.rtpmap = + +account.5.codec.2.enable = +account.5.codec.2.payload_type = +account.5.codec.2.priority = +account.5.codec.2.rtpmap = + +account.5.codec.3.enable = +account.5.codec.3.payload_type = +account.5.codec.3.priority = +account.5.codec.3.rtpmap = + +account.5.codec.4.enable = +account.5.codec.4.payload_type = +account.5.codec.4.priority = +account.5.codec.4.rtpmap = + +account.5.codec.5.enable = +account.5.codec.5.payload_type = +account.5.codec.5.priority = +account.5.codec.5.rtpmap = + +account.5.codec.6.enable = +account.5.codec.6.payload_type = +account.5.codec.6.priority = +account.5.codec.6.rtpmap = + +account.5.codec.7.enable = +account.5.codec.7.payload_type = +account.5.codec.7.priority = +account.5.codec.7.rtpmap = + +account.5.codec.8.enable = +account.5.codec.8.payload_type = +account.5.codec.8.priority = +account.5.codec.8.rtpmap = + +account.5.codec.9.enable = +account.5.codec.9.payload_type = +account.5.codec.9.priority = +account.5.codec.9.rtpmap = + +account.5.codec.10.enable = +account.5.codec.10.payload_type = +account.5.codec.10.priority = +account.5.codec.10.rtpmap = + +account.5.codec.11.enable = +account.5.codec.11.payload_type = +account.5.codec.11.priority = +account.5.codec.11.rtpmap = + + +####################################################################################### +## Audio Advanced ## +####################################################################################### +account.5.srtp_encryption = +account.5.ptime = + +## The default value is 0(Take a SRTP all encryption).1:Only carry AES - 80 secret key,2: Only carry AES - 32 secret key +account.5.srtp_auth_tag_mode = + +####################################################################################### +## Anonymous Call ## +####################################################################################### +account.5.send_anonymous_code = +account.5.anonymous_call = +account.5.anonymous_call_oncode = +account.5.anonymous_call_offcode = +account.5.reject_anonymous_call = +account.5.anonymous_reject_oncode = +account.5.anonymous_reject_offcode = +account.5.send_anonymous_rejection_code = + +####################################################################################### +## Pickup Code ## +####################################################################################### +account.5.dialoginfo_callpickup = +account.5.group_pickup_code = +account.5.direct_pickup_code = + +####################################################################################### +## DTMF ## +####################################################################################### +account.5.dtmf.type = +account.5.dtmf.info_type = +account.5.dtmf.dtmf_payload = + +####################################################################################### +## Alert info ## +####################################################################################### +account.5.alert_info_url_enable = +account.5.ringtone.ring_type = + +###Only for T46G Model +account.5.picture_info_enable = +##Except T19P/T21P Models +##The default value is blank.Values range 256 characters in length +account.5.alert_info = + +####################################################################################### +## Conference ## +####################################################################################### +account.5.conf_type = +account.5.conf_uri = + +####################################################################################### +## CID Source ## +####################################################################################### +account.5.cid_source = +account.5.cid_source_privacy = +account.5.cid_source_ppi = +account.5.cp_source = + +####################################################################################### +## Session Timer ## +####################################################################################### +account.5.session_timer.enable = +account.5.session_timer.expires = +account.5.session_timer.refresher = + +####################################################################################### +## Music on Hold ## +####################################################################################### +account.5.music_on_hold_type = +account.5.music_server_uri = + +####################################################################################### +## Advanced ## +####################################################################################### +account.5.auto_answer = +account.5.missed_calllog = +account.5.100rel_enable = +account.5.enable_user_equal_phone = +account.5.compact_header_enable = + +####################################################################################### +## DND(Except T19 Model) ## +####################################################################################### +account.5.dnd.enable = +account.5.dnd.on_code = +account.5.dnd.off_code = + +####################################################################################### +## Call Forward(Except T19 Model) ## +####################################################################################### +account.5.always_fwd.enable = +account.5.always_fwd.target = +account.5.always_fwd.off_code = +account.5.always_fwd.on_code = +account.5.busy_fwd.enable = +account.5.busy_fwd.target = +account.5.busy_fwd.off_code = +account.5.busy_fwd.on_code = +account.5.timeout_fwd.enable = +account.5.timeout_fwd.target = +account.5.timeout_fwd.timeout = +account.5.timeout_fwd.off_code = +account.5.timeout_fwd.on_code = + +####################################################################################### +## Voice Monitoring (Except T19P/T21P Models) ## +####################################################################################### +account.5.vq_rtcpxr.collector_name= +account.5.vq_rtcpxr.collector_server_host= +account.5.vq_rtcpxr.collector_server_port= +####################################################################################### +## Broadsoft Hoteling ## +####################################################################################### +account.5.hoteling.enable = +account.5.hoteling.user_id = +account.5.hoteling.password = +account.5.hoteling.auto_login_enable = + +####################################################################################### +## Broadsoft ACD ## +####################################################################################### +account.5.acd.enable = +account.5.acd.unavailable_reason_enable = +account.5.acd.available = +account.5.acd.initial_state = + +####################################################################################### +## Broadsoft ACD Call Center ## +####################################################################################### +account.5.reason_code.1 = +account.5.reason_code_name.1 = +account.5.bw_disp_code.1 = +account.5.bw_disp_code_name.1 = +account.5.supervisor_info_code.1 = +account.5.supervisor_info_code_name.1 = + +####################################################################################### +## Broadsoft Call Center ## +####################################################################################### +account.5.call_center.call_info_enable = +account.5.call_center.show_call_info_time = +account.5.call_center.disp_code_enable = +account.5.call_center.trace_enable = +account.5.call_center.emergency_enable = +account.5.call_center.queue_status_enable = +account.5.call_center.queue_status_light_enable = + +####################################################################################### +## Broadsoft XSI ## +####################################################################################### +##It configures the user name for XSI authentication for account X.Example:account.1.xsi.user = 3502@as.iop1.broadworks.net. +##The default value is blank. +account.5.xsi.user = + +##It configures the password for XSI authentication for account X.Example:account.1.xsi.password = 123456. +##The default value is blank. +account.5.xsi.password = + +##It configures the access URL of the Xtended Services Platform server for account X.Example:account.1.xsi.host = xsp1.iop1.broadworks.net. +##The default value is blank. +account.5.xsi.host = + +##It configures the server type of the Xtended Services Platform server for account X.Example:account.1.xsi.server_type = http. +##The default value is http. +account.5.xsi.server_type = + +##It configures the server port of the Xtended Services Platform server for account X.Example:account.1.xsi.port = 80. +##The default value is 80.Integer from 1 to 65535 +account.5.xsi.port = + + + +####################################################################################### +## Account6 Basic Settings ## +####################################################################################### +account.6.enable = +account.6.label = +account.6.display_name = +account.6.auth_name = +account.6.user_name = +account.6.password = +account.6.outbound_proxy_enable = +account.6.outbound_host = +account.6.outbound_port = +account.6.dial_tone = +account.6.sip_server.1.transport_type = +account.6.sip_server.2.transport_type = + +####################################################################################### +## Failback ## +####################################################################################### +account.6.reregister_enable = +account.6.naptr_build = +account.6.fallback.redundancy_type = +account.6.fallback.timeout = +account.6.sip_server.1.address = +account.6.sip_server.1.port = +account.6.sip_server.1.expires = +account.6.sip_server.1.retry_counts = +account.6.sip_server.1.failback_mode = +account.6.sip_server.1.failback_timeout = +account.6.sip_server.1.register_on_enable = + +account.6.sip_server.2.address = +account.6.sip_server.2.port = +account.6.sip_server.2.expires = +account.6.sip_server.2.retry_counts = +account.6.sip_server.2.failback_mode = +account.6.sip_server.2.failback_timeout = +account.6.sip_server.2.register_on_enable = + + +account.6.dns_cache_type = +account.6.dns_cache_a.1.name = +account.6.dns_cache_a.1.ip = +account.6.dns_cache_a.1.ttl = +account.6.dns_cache_srv.1.name = +account.6.dns_cache_srv.1.port = +account.6.dns_cache_srv.1.priority = +account.6.dns_cache_srv.1.target = +account.6.dns_cache_srv.1.weight = +account.6.dns_cache_srv.1.ttl = +account.6.dns_cache_naptr.1.name = +account.6.dns_cache_naptr.1.flags = +account.6.dns_cache_naptr.1.order = +account.6.dns_cache_naptr.1.preference = +account.6.dns_cache_naptr.1.replace = +account.6.dns_cache_naptr.1.service = +account.6.dns_cache_naptr.1.ttl = + +account.6.dns_cache_type = +account.6.dns_cache_a.2.name = +account.6.dns_cache_a.2.ip = +account.6.dns_cache_a.2.ttl = +account.6.dns_cache_srv.2.name = +account.6.dns_cache_srv.2.port = +account.6.dns_cache_srv.2.priority = +account.6.dns_cache_srv.2.target = +account.6.dns_cache_srv.2.weight = +account.6.dns_cache_srv.2.ttl = +account.6.dns_cache_naptr.2.name = +account.6.dns_cache_naptr.2.flags = +account.6.dns_cache_naptr.2.order = +account.6.dns_cache_naptr.2.preference = +account.6.dns_cache_naptr.2.replace = +account.6.dns_cache_naptr.2.service = +account.6.dns_cache_naptr.2.ttl = + +account.6.static_cache_pri = +account.6.register_expires_overlap = +account.6.subscribe_expires_overlap = + +####################################################################################### +## Register Advanced ## +####################################################################################### +account.6.sip_server_type = +account.6.unregister_on_reboot = +account.6.proxy_require = +account.6.srv_ttl_timer_enable = +account.6.register_mac = +account.6.register_line = +account.6.reg_fail_retry_interval = + +######################################################################### +## NAT Settings ## +######################################################################### +account.6.nat.nat_traversal = +account.6.nat.stun_server = +account.6.nat.stun_port = +account.6.nat.udp_update_enable = +account.6.nat.udp_update_time = +account.6.nat.rport = + +####################################################################################### +## Account6 Advance Settings ## +####################################################################################### +voice_mail.number.6 = +##Except T19P/T21P Models +account.6.auto_dial_enable = +account.6.auto_dial_num = + +account.6.call_id_mode = +account.6.call_info = +##It is the unit at the time of back to the fluid state +account.6.ringback_duration_time = + +####################################################################################### +## Subscribe ## +####################################################################################### +account.6.subscribe_mwi = +account.6.subscribe_mwi_expires = +account.6.subscribe_mwi_to_vm = +account.6.subscribe_acd_expires= +##Except T19P/T21P Models +account.6.display_mwi.enable = +##It is configuration MWI is NOTIFY messages, whether in Terminated status attributes. +##The default value is 0(Don't handle terminated values) +account.6.mwi_parse_terminated = + +account.6.display_mwi.enable = + +####################################################################################### +## BLF List(Except T19D Model) ## +####################################################################################### + +account.6.blf.blf_list_uri = +account.6.blf_list_code = +account.6.blf_list_barge_in_code = +account.6.blf.subscribe_period = +account.6.blf.subscribe_event = +account.6.out_dialog_blf_enable = + +####################################################################################### +## BLA/SCA ## +####################################################################################### +account.6.shared_line = +account.6.bla_number = +account.6.bla_subscribe_period = +##It configures the Call Pull Feature access code for account X. +##The default value is blank. +account.6.shared_line_callpull_code = +##It configures number of linekey for SCA. +##The default value is 1. +account.6.shared_line_number_of_linekey = +####################################################################################### +## Brosoft Callpark ## +####################################################################################### +##It enables or disables Broadsoft Callpark for account X.0-Disabled,1-Broadsoft SCA. +##The default value is 0. +account.6.callpark_enable = + +####################################################################################### +## Audio Codec ## +####################################################################################### +###T19D/T21D support codec1~codec8 +###T20P/T22P/T26P/T28P/T41P/T42G/T46G support codec1~codec11 + +account.6.codec.1.enable = +account.6.codec.1.payload_type = +account.6.codec.1.priority = +account.6.codec.1.rtpmap = + +account.6.codec.2.enable = +account.6.codec.2.payload_type = +account.6.codec.2.priority = +account.6.codec.2.rtpmap = + +account.6.codec.3.enable = +account.6.codec.3.payload_type = +account.6.codec.3.priority = +account.6.codec.3.rtpmap = + +account.6.codec.4.enable = +account.6.codec.4.payload_type = +account.6.codec.4.priority = +account.6.codec.4.rtpmap = + +account.6.codec.5.enable = +account.6.codec.5.payload_type = +account.6.codec.5.priority = +account.6.codec.5.rtpmap = + +account.6.codec.6.enable = +account.6.codec.6.payload_type = +account.6.codec.6.priority = +account.6.codec.6.rtpmap = + +account.6.codec.7.enable = +account.6.codec.7.payload_type = +account.6.codec.7.priority = +account.6.codec.7.rtpmap = + +account.6.codec.8.enable = +account.6.codec.8.payload_type = +account.6.codec.8.priority = +account.6.codec.8.rtpmap = + +account.6.codec.9.enable = +account.6.codec.9.payload_type = +account.6.codec.9.priority = +account.6.codec.9.rtpmap = + +account.6.codec.10.enable = +account.6.codec.10.payload_type = +account.6.codec.10.priority = +account.6.codec.10.rtpmap = + +account.6.codec.11.enable = +account.6.codec.11.payload_type = +account.6.codec.11.priority = +account.6.codec.11.rtpmap = + +####################################################################################### +## Audio Advanced ## +####################################################################################### +account.6.srtp_encryption = +account.6.ptime = + +## The default value is 0(Take a SRTP all encryption).1:Only carry AES - 80 secret key,2: Only carry AES - 32 secret key +account.6.srtp_auth_tag_mode = + +####################################################################################### +## Anonymous Call ## +####################################################################################### +account.6.send_anonymous_code = +account.6.anonymous_call = +account.6.anonymous_call_oncode = +account.6.anonymous_call_offcode = +account.6.reject_anonymous_call = +account.6.anonymous_reject_oncode = +account.6.anonymous_reject_offcode = +account.6.send_anonymous_rejection_code = + +####################################################################################### +## Pickup Code ## +####################################################################################### +account.6.dialoginfo_callpickup = +account.6.group_pickup_code = +account.6.direct_pickup_code = + +####################################################################################### +## DTMF ## +####################################################################################### +account.6.dtmf.type = +account.6.dtmf.info_type = + +###Only T46G Model supports this parameter +account.6.dtmf.dtmf_payload = + +####################################################################################### +## Alert info ## +####################################################################################### +account.6.alert_info_url_enable = +account.6.ringtone.ring_type = + +###Only for T46G Model +account.6.picture_info_enable = +##Except T19P/T21P Models +##The default value is blank.Values range 256 characters in length +account.6.alert_info = + +####################################################################################### +## Conference ## +####################################################################################### +account.6.conf_type = +account.6.conf_uri = + +####################################################################################### +## CID Source ## +####################################################################################### +account.6.cid_source = +account.6.cid_source_privacy = +account.6.cid_source_ppi = +account.6.cp_source = + +####################################################################################### +## Session Timer ## +####################################################################################### +account.6.session_timer.enable = +account.6.session_timer.expires = +account.6.session_timer.refresher = + +####################################################################################### +## Music on Hold ## +####################################################################################### +account.6.music_on_hold_type = +account.6.music_server_uri = + +####################################################################################### +## Advanced ## +####################################################################################### +account.6.auto_answer = +account.6.missed_calllog = +account.6.100rel_enable = +account.6.enable_user_equal_phone = +account.6.compact_header_enable = + +####################################################################################### +## DND(Except T19 Model) ## +####################################################################################### +account.6.dnd.enable = +account.6.dnd.on_code = +account.6.dnd.off_code = + +####################################################################################### +## Call Forward(Except T19 Model) ## +####################################################################################### +account.6.always_fwd.enable = +account.6.always_fwd.target = +account.6.always_fwd.off_code = +account.6.always_fwd.on_code = +account.6.busy_fwd.enable = +account.6.busy_fwd.target = +account.6.busy_fwd.off_code = +account.6.busy_fwd.on_code = +account.6.timeout_fwd.enable = +account.6.timeout_fwd.target = +account.6.timeout_fwd.timeout = +account.6.timeout_fwd.off_code = +account.6.timeout_fwd.on_code = + +####################################################################################### +## Voice Monitoring (Except T19P/T21P Models) ## +####################################################################################### +account.6.vq_rtcpxr.collector_name= +account.6.vq_rtcpxr.collector_server_host= +account.6.vq_rtcpxr.collector_server_port= +####################################################################################### +## Broadsoft Hoteling ## +####################################################################################### +account.6.hoteling.enable = +account.6.hoteling.user_id = +account.6.hoteling.password = +account.6.hoteling.auto_login_enable = + +####################################################################################### +## Broadsoft ACD ## +####################################################################################### +account.6.acd.enable = +account.6.acd.unavailable_reason_enable = +account.6.acd.available = +account.6.acd.initial_state = + +####################################################################################### +## Broadsoft ACD Call Center ## +####################################################################################### +account.6.reason_code.1 = +account.6.reason_code_name.1 = +account.6.bw_disp_code.1 = +account.6.bw_disp_code_name.1 = +account.6.supervisor_info_code.1 = +account.6.supervisor_info_code_name.1 = + +####################################################################################### +## Broadsoft Call Center ## +####################################################################################### +account.6.call_center.call_info_enable = +account.6.call_center.show_call_info_time = +account.6.call_center.disp_code_enable = +account.6.call_center.trace_enable = +account.6.call_center.emergency_enable = +account.6.call_center.queue_status_enable = +account.6.call_center.queue_status_light_enable = +####################################################################################### +## Broadsoft XSI ## +####################################################################################### +##It configures the user name for XSI authentication for account X.Example:account.1.xsi.user = 3502@as.iop1.broadworks.net. +##The default value is blank. +account.6.xsi.user = + +##It configures the password for XSI authentication for account X.Example:account.1.xsi.password = 123456. +##The default value is blank. +account.6.xsi.password = + +##It configures the access URL of the Xtended Services Platform server for account X.Example:account.1.xsi.host = xsp1.iop1.broadworks.net. +##The default value is blank. +account.6.xsi.host = + +##It configures the server type of the Xtended Services Platform server for account X.Example:account.1.xsi.server_type = http. +##The default value is http. +account.6.xsi.server_type = + +##It configures the server port of the Xtended Services Platform server for account X.Example:account.1.xsi.port = 80. +##The default value is 80.Integer from 1 to 65535 +account.6.xsi.port = + + + + +####################################################################################### +## Broadsoft Setting ## +####################################################################################### +bw.enable = + +###It enables or disables feature key synchronization. +###0-Disabled,1-Enabled. +###The default value is 0. +bw.feature_key_sync = + + +####################################################################################### +## Broadsoft Phonebook(Except T20P model) ## +####################################################################################### +###It enables or disables the phone to display the group directory. +###0-Disabled,1-Enabled. +###The default value is 1. +bw_phonebook.group_enable = + +###It enables or disables the phone to display the personal directory. +###0-Disabled,1-Enabled. +###The default value is 1. +bw_phonebook.personal_enable = + + +###It enables or disables the phone to display the group common directory. +###0-Disabled,1-Enabled. +###The default value is 1. +bw_phonebook.group_common_enable = + + +###It enables or disables the phone to display the enterprise directory. +###0-Disabled,1-Enabled. +###The default value is 1. +bw_phonebook.enterprise_enable = + +###It enables or disables the phone to display the enterprise common directory. +###0-Disabled,1-Enabled. +###The default value is 1. +bw_phonebook.enterprise_common_enable = + +###It configures the display name on the LCD screen for the enterprise common directory. +###The default value is EnterpriseCommon. +bw_phonebook.enterprise_common_displayname = + +###It enables or disables BroadSoft call log feature. +###0-Disabled,1-Enabled. +###The default value is 0. +bw_phonebook.call_log_enable = + +bw.calllog_and_dir = + +###It enables or disables custom directory feature. +###0-Disabled,1-Enabled. +###The default value is 0. +bw_phonebook.custom = + +###It configures the display name on the LCD screen for the group directory. +###The default value is Group. +bw_phonebook.group_displayname = + +###It configures the display name on the LCD screen for the enterprise directory. +###The default value is Enterprise. +bw_phonebook.enterprise_displayname = + +###It configures the display name on the LCD screen for the personal directory. +###The default value is Personal. +bw_phonebook.personal_displayname = + +bw_phonebook.common_displayname = + + +##It configures the interval (in minutes) for the phone to update the data of the BroadSoft directory from the BroadSoft server. +##The default value is 60.Integer from 2 to 43200 +directory.update_time_interval = + + +####################################################################################### +## BSFT UC ## +####################################################################################### +features.uc_enable = +features.uc_password = +features.uc_username = + +####################################################################################### +## Features Pickup(Except T20P model) ## +####################################################################################### +##It enables or disables the phone to display the GPickup soft key when the phone is in the pre-dialing screen. +##0-Disabled,1-Enabled. +##The default value is 0. +features.pickup.group_pickup_enable = + +##It configures the group call pickup code. +##The default value is blank. +features.pickup.group_pickup_code = + +##It enables or disables the phone to display the DPickup soft key when the phone is in the pre-dialing screen. +##0-Disabled,1-Enabled. +##The default value is 0. +features.pickup.direct_pickup_enable = + +##It configures the directed call pickup code. +##The default value is blank. +features.pickup.direct_pickup_code = + +##It enables or disables the phone to display a visual alert when the monitored user receives an incoming call. +##0-Disabled,1-Enabled. +##The default value is 0. +features.pickup.blf_visual_enable = + +##It enables or disables the phone to play an audio alert when the monitored user receives an incoming call. +##0-Disabled,1-Enabled. +##The default value is 0. +features.pickup.blf_audio_enable = + +####################################################################################### +## Call Park(Except T20P model) ## +####################################################################################### +###It enables or disables the phone to display the Park soft key during a call. +###0-Disabled,1-Enabled. +###The default value is 0. +call_park.enable = + + + +###It enables or disables the phone to display the GPark soft key during a call. +###0-Disabled,1-Enabled. +###The default value is 0. +call_park.group_enable = + +###It enables or disables the phone to play a warning tone when a call is parked against its line. +###0-Disabled,1-Enabled. +###The default value is 0. +call_park.park_ring = + +###It enables or disables the phone to display a parked indicator when a call is parked against its line. +###0-Disabled,1-Enabled. +###The default value is 0. +call_park.park_visual_notify_enable = + +features.call_park.group_park_code = +features.call_park.park_code = +features.call_park.park_mode = +features.call_park.park_retrieve_code = + +####################################################################################### +## Time ## +####################################################################################### +##It configures the time zone.For more available time zones, refer to Time Zones on page 215. +##The default value is +8. +local_time.time_zone = + +##It configures the time zone name.For more available time zone names, refer to Time Zones on page 215. +##The default time zone name is China(Beijing). +local_time.time_zone_name = + +local_time.ntp_server1 = +local_time.ntp_server2 = + +##It configures the update interval (in seconds) when using the NTP server. +##The default value is 1000.Integer from 15 to 86400 +local_time.interval = + +##It enables or disables daylight saving time (DST) feature. +##0-Disabled,1-Enabled,2-Automatic. +##The default value is 2. +local_time.summer_time = + +##It configures the way DST works when DST feature is enabled. +##0-DST By Date ,1-DST By Week. +##The default value is 0. +local_time.dst_time_type = + +##It configures the start time of the DST. +##Value formats are:Month/Day/Hour (for By Date),Month/ Day of Week/ Day of Week Last in Month/ Hour of Day (for By Week) +##The default value is 1/1/0. +local_time.start_time = + +##It configures the end time of the DST. +##Value formats are:Month/Day/Hour (for By Date),Month/ Day of Week/ Day of Week Last in Month/ Hour of Day (for By Week) +##The default value is 12/31/23. +local_time.end_time = + +##It configures the offset time (in minutes). +##The default value is blank.Integer from -300 to 300 +local_time.offset_time = + +##It configures the time format.0-12 Hour,1-24 Hour. +##The default value is 1. +local_time.time_format = + + +local_time.date_format = + +##It enables or disables the phone to update time with the offset time obtained from the DHCP server. +##It is only available to offset from GMT 0.0-Disabled,1-Enabled. +##The default value is 0. +local_time.dhcp_time = + +##It configures the phone to obtain time from NTP server or manual settings.0-Manual,1-NTP +##The default value is 1. +local_time.manual_time_enable = + +##It enables or disables the phone to use manually configured NTP server preferentially. +##0-Disabled (use the NTP server obtained by DHCP preferentially),1-Enabled. +##The default value is 0. +local_time.manual_ntp_srv_prior = + +auto_dst.url = + +####################################################################################### +## NETWORK ## +####################################################################################### +##It configures the IP address mode.0-IPv4,1-IPv6,2-IPv4&IPv6 +##The default value is 0.It takes effect after a reboot. +network.ip_address_mode = + +network.ipv6_prefix = +network.ipv6_internet_port.type = +network.ipv6_internet_port.ip = +network.ipv6_internet_port.gateway = +network.ipv6_primary_dns = +network.ipv6_secondary_dns = + +####Only T46G Model supports this parameter +network.ipv6_icmp_v6.enable = + +network.internet_port.type = +network.internet_port.ip = +network.internet_port.mask = +network.internet_port.gateway = +network.primary_dns= +network.secondary_dns = + + + + + + + + diff --git a/phones/yealink/v80/orig/Remote Phone book/Department.xml b/phones/yealink/v80/orig/Remote Phone book/Department.xml new file mode 100644 index 0000000..fb58004 --- /dev/null +++ b/phones/yealink/v80/orig/Remote Phone book/Department.xml @@ -0,0 +1,25 @@ + + + + + Test1 + 23000 + + + + + Test2 + 303 + 915980830849 + + + + + + Test3 + 6650 + 915980830849 + + + + diff --git a/phones/yealink/v80/orig/Remote Phone book/Menu.xml b/phones/yealink/v80/orig/Remote Phone book/Menu.xml new file mode 100644 index 0000000..1ee51b3 --- /dev/null +++ b/phones/yealink/v80/orig/Remote Phone book/Menu.xml @@ -0,0 +1,29 @@ + +XiaMen Yealink + + +Department1 +http://10.2.9.1:99/Department.xml + + + +Department2 +http://10.2.9.1:99/Department.xml + + + +# +http://10.2.9.1:99/Department.xml + + + +* +http://10.2.9.1:99/Department.xml + + + +1 +http://10.2.9.1:99/Department.xml + + + \ No newline at end of file diff --git a/phones/yealink/v80/orig/Softkey Layout/CallFailed.xml b/phones/yealink/v80/orig/Softkey Layout/CallFailed.xml new file mode 100644 index 0000000..d116cf5 --- /dev/null +++ b/phones/yealink/v80/orig/Softkey Layout/CallFailed.xml @@ -0,0 +1,19 @@ + + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/phones/yealink/v80/orig/Softkey Layout/CallIn.xml b/phones/yealink/v80/orig/Softkey Layout/CallIn.xml new file mode 100644 index 0000000..97560d4 --- /dev/null +++ b/phones/yealink/v80/orig/Softkey Layout/CallIn.xml @@ -0,0 +1,18 @@ + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/phones/yealink/v80/orig/Softkey Layout/Connecting.xml b/phones/yealink/v80/orig/Softkey Layout/Connecting.xml new file mode 100644 index 0000000..2bf1ed8 --- /dev/null +++ b/phones/yealink/v80/orig/Softkey Layout/Connecting.xml @@ -0,0 +1,36 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/phones/yealink/v80/orig/Softkey Layout/Dialing.xml b/phones/yealink/v80/orig/Softkey Layout/Dialing.xml new file mode 100644 index 0000000..8168b95 --- /dev/null +++ b/phones/yealink/v80/orig/Softkey Layout/Dialing.xml @@ -0,0 +1,24 @@ + + + + + + + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/phones/yealink/v80/orig/Softkey Layout/RingBack.xml b/phones/yealink/v80/orig/Softkey Layout/RingBack.xml new file mode 100644 index 0000000..a29317a --- /dev/null +++ b/phones/yealink/v80/orig/Softkey Layout/RingBack.xml @@ -0,0 +1,36 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/phones/yealink/v80/orig/Softkey Layout/Talking.xml b/phones/yealink/v80/orig/Softkey Layout/Talking.xml new file mode 100644 index 0000000..17d88c0 --- /dev/null +++ b/phones/yealink/v80/orig/Softkey Layout/Talking.xml @@ -0,0 +1,109 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/phones/yealink/v80/orig/XML Browser/PHP Template/Config.php b/phones/yealink/v80/orig/XML Browser/PHP Template/Config.php new file mode 100644 index 0000000..966bcb1 --- /dev/null +++ b/phones/yealink/v80/orig/XML Browser/PHP Template/Config.php @@ -0,0 +1,41 @@ +\n"; +$xml .= "TextMenu This interface is just used to Test extMenu This interface is just used to Test extMenu This interface is just used to Test extMenu Tex!\n"; +$xml .= " + memory1.DKtype=GroupListen + memory1.Label=Groupqqq + memory1.Line=0 + memory1.Value=123456789 + memory1.PickupValue=1 + \n"; +$xml .= "\n"; + +push2phone("10.2.9.5","10.2.9.132",$xml); +push2phone("10.2.9.5","10.2.9.83",$xml); + + +#replace 10.1.3.8 with your Apache ip address +#replace 10.1.3.180 with your phone ip address +?> + + diff --git a/phones/yealink/v80/orig/XML Browser/PHP Template/Directory.php b/phones/yealink/v80/orig/XML Browser/PHP Template/Directory.php new file mode 100644 index 0000000..8e245ed --- /dev/null +++ b/phones/yealink/v80/orig/XML Browser/PHP Template/Directory.php @@ -0,0 +1,85 @@ +\n"; + +# + + +$xml .= " + John + 10.3.5.219 + + + + Doe + 4326 + + + + Wayne + 9982691234 + + + + test + 9982691234 + + + + Mike + 10.50.10.49 + + + + Thomas + 4326 + + + + Yang + 9982691234 + \n"; + +# +$xml .= "\n"; +push2phone("10.3.5.5","10.3.12.3",$xml); +push2phone("10.3.5.5","10.3.5.219",$xml); +push2phone("10.3.5.5","10.3.5.183",$xml); + +?> \ No newline at end of file diff --git a/phones/yealink/v80/orig/XML Browser/PHP Template/Excut.php b/phones/yealink/v80/orig/XML Browser/PHP Template/Excut.php new file mode 100644 index 0000000..ae2e535 --- /dev/null +++ b/phones/yealink/v80/orig/XML Browser/PHP Template/Excut.php @@ -0,0 +1,32 @@ +\n"; +$xml .= ""; +$xml .= "\n"; + +push2phone("10.2.9.5","10.2.9.132",$xml); + + + +#replace 10.1.3.8 with your Apache ip address +#replace 10.1.3.180 with your phone ip address +?> diff --git a/phones/yealink/v80/orig/XML Browser/PHP Template/Formatted.php b/phones/yealink/v80/orig/XML Browser/PHP Template/Formatted.php new file mode 100644 index 0000000..c86b94d --- /dev/null +++ b/phones/yealink/v80/orig/XML Browser/PHP Template/Formatted.php @@ -0,0 +1,49 @@ +\n"; + +$xml .= "Header line1\n"; +$xml .= "Header line2\n"; +$xml .= "Header line3\n"; + +$xml .= "\n"; +$xml .= "Scroll line1\n"; +$xml .= "Scroll line2\n"; +$xml .= "Scroll line3\n"; +$xml .= "\n"; + +$xml .= "Footer line1\n"; +$xml .= "Footer line2\n"; +$xml .= "Footer line3\n"; + +$xml .= "\n"; + +push2phone("10.2.9.5","10.2.9.88",$xml); +push2phone("10.2.9.5","10.2.9.132",$xml); + + +#replace first ip with your Apache ip address +#replace second ip with your phone ip address +?> + + + diff --git a/phones/yealink/v80/orig/XML Browser/PHP Template/ImageMenu.php b/phones/yealink/v80/orig/XML Browser/PHP Template/ImageMenu.php new file mode 100644 index 0000000..f2bff26 --- /dev/null +++ b/phones/yealink/v80/orig/XML Browser/PHP Template/ImageMenu.php @@ -0,0 +1,38 @@ +\n"; +$xml .= "00555500005555000000000000aaaa0000aaaa0000ffff0000ffff0000ffff00fffffffff0ffff0f00ffff0000f00f00\n"; + +$xml .= " +http://10.3.5.5:9/xmlBrowser/TestInput.xml +http://10.3.5.5:9/xmlBrowser/TestInput.xml +http://10.3.5.5:9/xmlBrowser/TestInput.xml +\n"; +$xml .= "\n"; + +push2phone("10.3.5.5","10.3.12.3",$xml); +push2phone("10.3.5.5","10.3.5.219",$xml); +push2phone("10.3.5.5","10.3.5.183",$xml); + +#replace 10.1.3.8 with your Apache ip address +#replace 10.1.3.180 with your phone ip address +?> diff --git a/phones/yealink/v80/orig/XML Browser/PHP Template/ImageScreen.php b/phones/yealink/v80/orig/XML Browser/PHP Template/ImageScreen.php new file mode 100644 index 0000000..78334c5 --- /dev/null +++ b/phones/yealink/v80/orig/XML Browser/PHP Template/ImageScreen.php @@ -0,0 +1,54 @@ +\n"; +#T2X +#$xml .= "00555500005555000000000000aaaa0000aaaa0000ffff0000ffff0000ffff00fffffffff0ffff0f00ffff0000f00f00\n"; +$xml .= "http://10.3.5.5:9/400_240.JPG\n"; +$xml .= "\n"; +push2phone("10.3.5.5","10.3.12.3",$xml); +push2phone("10.3.5.5","10.3.5.219",$xml); +push2phone("10.3.5.5","10.3.5.183",$xml); + + +#replace 10.1.3.8 with your Apache ip address +#replace 10.1.3.180 with your phone ip address +?> + + + + + + + + + + + + + + diff --git a/phones/yealink/v80/orig/XML Browser/PHP Template/Input.php b/phones/yealink/v80/orig/XML Browser/PHP Template/Input.php new file mode 100644 index 0000000..6dceff2 --- /dev/null +++ b/phones/yealink/v80/orig/XML Browser/PHP Template/Input.php @@ -0,0 +1,48 @@ +\n"; +$xml .= "TextMenu This interface is just used to Test extMenu This interface is just used to Test extMenu This interface is just used to Test extMenu Tex!\n"; + +$xml .= "http://10.2.9.7:8080/TestDirectory.xml\n"; +$xml .= " + IP Address: + IP + 2 + 192ff138 + + + + Name: + user + 3 + jxz + "; + +$xml .= "\n"; + +push2phone("10.3.5.5","10.3.5.219",$xml); +push2phone("10.3.5.5","10.3.12.3",$xml); + + +#replace 10.1.3.8 with your Apache ip address +#replace 10.1.3.180 with your phone ip address +?> diff --git a/phones/yealink/v80/orig/XML Browser/PHP Template/Status.php b/phones/yealink/v80/orig/XML Browser/PHP Template/Status.php new file mode 100644 index 0000000..f97a5e5 --- /dev/null +++ b/phones/yealink/v80/orig/XML Browser/PHP Template/Status.php @@ -0,0 +1,33 @@ +\n"; +$xml .= "TextMenu This interface is just used to Test extMenu This interface is just used to Test extMenu This interface is just used to Test extMenu Tex!\n"; +$xml .="Forward to 12ft34\n"; +$xml .= "\n"; + +push2phone("10.2.9.5","10.2.9.132",$xml); +push2phone("10.2.9.5","10.2.9.83",$xml); + + +#replace 10.1.3.8 with your Apache ip address +#replace 10.1.3.180 with your phone ip address +?> diff --git a/phones/yealink/v80/orig/XML Browser/PHP Template/TextMenu.php b/phones/yealink/v80/orig/XML Browser/PHP Template/TextMenu.php new file mode 100644 index 0000000..9316c76 --- /dev/null +++ b/phones/yealink/v80/orig/XML Browser/PHP Template/TextMenu.php @@ -0,0 +1,53 @@ +\n"; +$xml .= "TextMenu This interface is just used to Test extMenu Tex!\n"; +$xml .= " +Show the areagf +http://10.2.9.7:8080/url3/TestDirectory.xml +220 +0&menu_pos=1 +\n"; +$xml .= " + + SoftKey:Select + + + + SoftKey:Exit + 0&menu_pos=1 + + + + http://10.3.5.5:9/xmlBrowser/TestInput.xml + 0&menu_pos=1 +\n"; +$xml .= "\n"; + +push2phone("10.3.5.5","10.3.12.3",$xml); +push2phone("10.3.5.5","10.3.5.219",$xml); +push2phone("10.3.5.5","10.3.5.183",$xml); + + +#replace 10.1.3.8 with your Apache ip address +#replace 10.1.3.180 with your phone ip address +?> diff --git a/phones/yealink/v80/orig/XML Browser/PHP Template/TextScreen.php b/phones/yealink/v80/orig/XML Browser/PHP Template/TextScreen.php new file mode 100644 index 0000000..7bae315 --- /dev/null +++ b/phones/yealink/v80/orig/XML Browser/PHP Template/TextScreen.php @@ -0,0 +1,41 @@ +\n"; +$xml .= "Push test\n"; +$xml .= "This is a test for pushing text to a phone.\n"; +$xml .= "\n"; +$xml .= " + +http://10.3.3.4:9/update/xmlBrowser/TestDirectory1.xml + + + + SoftKey:Exit +\n"; + +push2phone("10.3.5.5","10.3.12.3",$xml); +push2phone("10.3.5.5","10.3.5.219",$xml); +push2phone("10.3.5.5","10.3.5.183",$xml); + +#replace 10.1.3.8 with your Apache ip address +#replace 10.1.3.180 with your phone ip address +?> diff --git a/phones/yealink/v80/orig/XML Browser/SipNotify Message/sipNotify_uri.txt b/phones/yealink/v80/orig/XML Browser/SipNotify Message/sipNotify_uri.txt new file mode 100644 index 0000000..27a163d --- /dev/null +++ b/phones/yealink/v80/orig/XML Browser/SipNotify Message/sipNotify_uri.txt @@ -0,0 +1,24 @@ +NOTIFY sip:303@192.168.168.75:5063 SIP/2.0 +From: "303";tag=41e83658-c0a8a8c8-13c4-50022-1a1b1-17e4bacd-1a1b1 +To: "303";tag=593303487 +Call-ID: 33220088@192.168.168.75 +CSeq: 2 NOTIFY +Via: SIP/2.0/UDP 192.168.168.200:5060;rport;branch=z9hG4bK-1a22f-6618b71-5c4a8ac7 +Subscription-State: active +Event: aastra-xml +Max-Forwards: 70 +Supported: replaces,timer +Contact: +Content-Type: application/xml +Content-Length: 107 + + + + + + +************************************************************* + +content-lengthΪ 66 + URIַ + +************************************************************* \ No newline at end of file diff --git a/phones/yealink/v80/orig/XML Browser/SipNotify Message/sipNotify_xml.txt b/phones/yealink/v80/orig/XML Browser/SipNotify Message/sipNotify_xml.txt new file mode 100644 index 0000000..cb1a481 --- /dev/null +++ b/phones/yealink/v80/orig/XML Browser/SipNotify Message/sipNotify_xml.txt @@ -0,0 +1,60 @@ +NOTIFY sip:303@192.168.168.75:5063 SIP/2.0 +From: "303";tag=41e83658-c0a8a8c8-13c4-50022-1a1b1-17e4bacd-1a1b1 +To: "303";tag=593303487 +Call-ID: 332200269@192.168.168.75 +CSeq: 2 NOTIFY +Via: SIP/2.0/UDP 192.168.168.200:5060;rport;branch=z9hG4bK-1a22f-6618b71-5c4a8ac7 +Subscription-State: active +Event: yealink-xml +Max-Forwards: 70 +Supported: replaces,timer +Contact: +Content-Type: application/xml +Content-Length: 1349 (xmlֽ) + + + + +TextScreen dfsdfsd;k ; k *&^%$@#*( l kl k l k l kl k l k l k l k lk l lllkkkkk + +Today I am very glad, as you pleased? zhong...sdfafasfasa Every asfasfas adsfasfafasd sdfasfjlijo asdfjaslfj Testing is being done is not familiar with the equipment, zhong...sdfafasfasa Every asfasfas adsfasfafasd sdfasfjlijo asdfjaslfj zhong...sdfafasfasa Every asfasfas adsfasfafasd sdfasfjlijo asdfjaslfj skyscraper starts. + + + +SoftKey:Select + + + + +http://10.1.0.105/menu1.xml + + + + +http://D:eclipseworkspaceyealinkmenumymenu.php?menu_source=menu2&menu_user=201&menu_action=remove&menu_page=1 + + + + +SoftKey:Exit + + + + +http://D:eclipseworkspacyealinkmenumymenu.php?menu_source=menu2&menu_user=201&menu_set=2&menu_page=1 + + + + + +************************************************************* + +content-lengthΪXMLַȣPushXMLGetLength.exe߼ + +************************************************************* \ No newline at end of file diff --git a/phones/yealink/v80/orig/XML Browser/XML Template/Configuration.xml b/phones/yealink/v80/orig/XML Browser/XML Template/Configuration.xml new file mode 100644 index 0000000..cb0da58 --- /dev/null +++ b/phones/yealink/v80/orig/XML Browser/XML Template/Configuration.xml @@ -0,0 +1,16 @@ + + + + + account.1.enable = 1 + account.1.label = 1400 + account.1.display_name = 1400 + account.1.user_name = 1400 + account.1.auth_name = 1400 + account.1.sip_server.1.address = 10.2.1.199 + + forward.always.enable = 1 + forward.always.target = 2510 + + diff --git a/phones/yealink/v80/orig/XML Browser/XML Template/Directory.xml b/phones/yealink/v80/orig/XML Browser/XML Template/Directory.xml new file mode 100644 index 0000000..cbdd51b --- /dev/null +++ b/phones/yealink/v80/orig/XML Browser/XML Template/Directory.xml @@ -0,0 +1,42 @@ + + + + + + + + John + 2510 + + + + Doe + 4326 + + + + Wayne + 9982691234 + + + + + + diff --git a/phones/yealink/v80/orig/XML Browser/XML Template/Execute.xml b/phones/yealink/v80/orig/XML Browser/XML Template/Execute.xml new file mode 100644 index 0000000..5a519c1 --- /dev/null +++ b/phones/yealink/v80/orig/XML Browser/XML Template/Execute.xml @@ -0,0 +1,11 @@ + + + + + + + + + + diff --git a/phones/yealink/v80/orig/XML Browser/XML Template/FormattedTextScreen.xml b/phones/yealink/v80/orig/XML Browser/XML Template/FormattedTextScreen.xml new file mode 100644 index 0000000..a39b120 --- /dev/null +++ b/phones/yealink/v80/orig/XML Browser/XML Template/FormattedTextScreen.xml @@ -0,0 +1,22 @@ + + + + Header line1 + + + Scroll line1 + Scroll line2 + Scroll line3 + + + Footer line1 + + + + diff --git a/phones/yealink/v80/orig/XML Browser/XML Template/ImageMenu.xml b/phones/yealink/v80/orig/XML Browser/XML Template/ImageMenu.xml new file mode 100644 index 0000000..c41cde5 --- /dev/null +++ b/phones/yealink/v80/orig/XML Browser/XML Template/ImageMenu.xml @@ -0,0 +1,25 @@ + + + + http://10.3.5.5:9/400_240.JPG + + + + + http://10.3.5.5:9/xmlBrowser/TestInput.xml + http://10.3.5.5:9/xmlBrowser/TestInput.xml + TextScreen.xml + + + + + + diff --git a/phones/yealink/v80/orig/XML Browser/XML Template/ImageScreen.xml b/phones/yealink/v80/orig/XML Browser/XML Template/ImageScreen.xml new file mode 100644 index 0000000..6106e09 --- /dev/null +++ b/phones/yealink/v80/orig/XML Browser/XML Template/ImageScreen.xml @@ -0,0 +1,16 @@ + + + + http://10.3.5.5:9/aa.jpg + + + diff --git a/phones/yealink/v80/orig/XML Browser/XML Template/InputScreen.xml b/phones/yealink/v80/orig/XML Browser/XML Template/InputScreen.xml new file mode 100644 index 0000000..b301363 --- /dev/null +++ b/phones/yealink/v80/orig/XML Browser/XML Template/InputScreen.xml @@ -0,0 +1,48 @@ + + + + + Input Info + + http://10.3.5.5/ + + + User ID: + userid + 1QQQQ + 21501 + + + + + IP Address: + IP + 2 + 192.168.0.138 + + + + Name: + user + 5QQQQ + jxz + + + + password: + passwd + 4 + 123456 + + + + diff --git a/phones/yealink/v80/orig/XML Browser/XML Template/Status.xml b/phones/yealink/v80/orig/XML Browser/XML Template/Status.xml new file mode 100644 index 0000000..a3b0746 --- /dev/null +++ b/phones/yealink/v80/orig/XML Browser/XML Template/Status.xml @@ -0,0 +1,21 @@ + + + + Open DND + Foward to 321 + Foward to 654 + + + + + diff --git a/phones/yealink/v80/orig/XML Browser/XML Template/TextMenu.xml b/phones/yealink/v80/orig/XML Browser/XML Template/TextMenu.xml new file mode 100644 index 0000000..69cea81 --- /dev/null +++ b/phones/yealink/v80/orig/XML Browser/XML Template/TextMenu.xml @@ -0,0 +1,73 @@ + + + +TextMenu + + +Input11111111111111111111111111111111111111111111111111111111111111222222222 +Input +http://10.3.5.5/TestStatus.xml +220 +0&menu_pos=1 + + + +FormatText +http://10.3.3.4:9/update/xmlBrowser/TestFormattedText.xml +220 + + + + +Directory +http://10.3.3.4:9/update/xmlBrowser/TestDirectory.xml +220 + + + + +ImageScreen +http://10.3.3.4:9/update/xmlBrowser/TestImage.xml +220 + + + + +TextScreen +http://10.3.3.4:9/update/xmlBrowser/TextScreen.xml +227 + + + + +StatusScreen +http://10.3.3.4:9/update/xmlBrowser/TestStatus.xml +228 + + + + +Config +http://10.3.3.4:9/update/xmlBrowser/TestConfig.xml +229 + + + + +Execute +http://10.3.3.4:9/update/xmlBrowser/TestExecute.xml +230 + + + + + + diff --git a/phones/yealink/v80/orig/XML Browser/XML Template/TextScreen.xml b/phones/yealink/v80/orig/XML Browser/XML Template/TextScreen.xml new file mode 100644 index 0000000..6667256 --- /dev/null +++ b/phones/yealink/v80/orig/XML Browser/XML Template/TextScreen.xml @@ -0,0 +1,19 @@ + + + +TextScreen + +Yealink T-38 Xml Browser Formation process of 18th CPC National Congress + -38 Xml Browser Formation process of 18th CPC National Congress -38 Xml Browser Formation process of 18th CPC National Congress + + + + + + diff --git a/phones/yealink/v80/orig/favorite_setting/favorite_setting.xml b/phones/yealink/v80/orig/favorite_setting/favorite_setting.xml new file mode 100644 index 0000000..c1f1a4a --- /dev/null +++ b/phones/yealink/v80/orig/favorite_setting/favorite_setting.xml @@ -0,0 +1,10 @@ + + + + + + + + + + diff --git a/phones/yealink/v80/orig/super_search/super_search.xml b/phones/yealink/v80/orig/super_search/super_search.xml new file mode 100644 index 0000000..8b6585b --- /dev/null +++ b/phones/yealink/v80/orig/super_search/super_search.xml @@ -0,0 +1,8 @@ + + + + + + + +