diff --git a/phones/yealink/t19-t31/asterprov/profiles/yealink-t19-t31-profile-dynamic.cfg b/phones/yealink/t19-t31/asterprov/profiles/yealink-t19-t31-profile-dynamic.cfg new file mode 100644 index 0000000..d5bc494 --- /dev/null +++ b/phones/yealink/t19-t31/asterprov/profiles/yealink-t19-t31-profile-dynamic.cfg @@ -0,0 +1,2 @@ +mime_type => text/xml, text/plain +${TOLOWER(${MAC})}.cfg => yealink-t19-t31-tmpl.cfg diff --git a/phones/yealink/t19-t31/asterprov/profiles/yealink-t19-t31-profile-static.cfg b/phones/yealink/t19-t31/asterprov/profiles/yealink-t19-t31-profile-static.cfg new file mode 100644 index 0000000..482a4e1 --- /dev/null +++ b/phones/yealink/t19-t31/asterprov/profiles/yealink-t19-t31-profile-static.cfg @@ -0,0 +1,10 @@ +mime_type => text/xml, text/plain +;Replace mac(MAC)1(2) to device mac address (in lower and higher register) +;General cfg file +;static_file => r000000000056.cfg +;Dev1 +static_file => mac1.cfg +static_file => MAC1.cfg +;Dev2 +static_file => mac2.cfg +static_file => MAC2.cfg diff --git a/phones/yealink/t41-t46/orig/full-config-tmpl.cfg b/phones/yealink/t41-t46/orig/full-config-tmpl.cfg deleted file mode 100644 index f9fd1c1..0000000 --- a/phones/yealink/t41-t46/orig/full-config-tmpl.cfg +++ /dev/null @@ -1,1464 +0,0 @@ -#!version:1.0.0.1 - -##File header "#!version:1.0.0.1" can not be edited or deleted, and must be placed in the first line.## -##This template file is applicable to SIP-T28P/T26P/T22P/T20P/T21P/T19P/T46G/T42G/T41P IP phones running firmware version 72 or later.## -##For more information on configuration parameters, refer to Yealink_SIP-T2_Series_T19P_T4_Series_IP_Phones_Auto_Provisioning_Guide.## - -####################################################################################### -## Hostname ## -####################################################################################### -network.dhcp_host_name = - -####################################################################################### -## PPPoE(Except T41P/T42G Models) ## -####################################################################################### -network.pppoe.user = -network.pppoe.password = - - -####################################################################################### -## Network Advanced ## -####################################################################################### -##It enables or disables the PC port.0-Disabled,1-Auto Negotiation. -##The default value is 1.It takes effect after a reboot. -network.pc_port.enable = - -##It configures the transmission mode and speed of the Internet (WAN) port. -##0-Auto negotiate -##1-Full duplex 10Mbps -##2-Full duplex 100Mbps -##3-Half duplex 10Mbps -##4-Half duplex 100Mbps -##5-Full duplex 1000Mbps (only applicable to SIP-T42G and SIP-T46G IP phones) -##The default value is 0.It takes effect after a reboot. -network.internet_port.speed_duplex = - -##It configures the transmission mode and speed of the PC (LAN) port. -##0-Auto negotiate -##1-Full duplex 10Mbps -##2-Full duplex 100Mbps -##3-Half duplex 10Mbps -##4-Half duplex 100Mbps -##5-Full duplex 1000Mbps (only applicable to SIP-T42G and SIP-T46G IP phones) -##The default value is 0.It takes effect after a reboot. -network.pc_port.speed_duplex = - -##It enables or disables the phone to use manually configured static IPv4 DNS when Internet (WAN) port type for IPv4 is configured as DHCP. -##0-Disabled (use the IPv4 DNS obtained by DHCP) 1-Enabled -##The default value is 0.It takes effect after a reboot. -network.static_dns_enable = - -network.ipv6_static_dns_enable = - -###Only T41P/T42G/T46G Models support this parameter -network.vlan.pc_port_mode = -##It enable or disable to use A record of TTL -##The defalue value is 1;0-Disable 1-Enable - -network.dns.ttl_enable = -##It configures the LAN MTU (Except T21D/T19D) -##The default value is 1500,.Integer from 128 to 1500.It takes effect after a reboot. -network.mtu_value = - - -####################################################################################### -## VLAN ## -####################################################################################### -network.vlan.internet_port_enable = -network.vlan.internet_port_vid = -network.vlan.internet_port_priority = -network.vlan.pc_port_enable = -network.vlan.pc_port_vid = -network.vlan.pc_port_priority = -network.vlan.dhcp_enable = -network.vlan.dhcp_option = -##It configures LLDP or manually VLAN can't obtain IP, whether to switch to other methods of VLAN or closed VLAN to get IP -##(Except T19P/T21P Models) 0-Disable 1-Enable -network.vlan.vlan_change.enable = - -####################################################################################### -## WEB Port ## -####################################################################################### -##It configures the HTTP port for web server access. -##The default value is 80.It takes effect after a reboot. -network.port.http = - -##It configures the HTTPS port for web server access. -##The default value is 443.It takes effect after a reboot. -network.port.https = - -wui.https_enable = -wui.http_enable = - -####################################################################################### -## QoS ## -####################################################################################### -##It configures the voice QoS. -##The default value is 46.It takes effect after a reboot.Integer from 0 to 63 -network.qos.rtptos = - -##It configures the SIP QoS. -##The default value is 26.It takes effect after a reboot.Integer from 0 to 63 -network.qos.signaltos = - -####################################################################################### -## 802.1X ## -####################################################################################### -network.802_1x.mode = -network.802_1x.identity = -network.802_1x.md5_password = -network.802_1x.root_cert_url = -network.802_1x.client_cert_url = - -##It configure the mouth of the PC 802.1 x - logoff function.It takes effect after a reboot. -##The default value is 0-Dsable , 1-Enable -network.802_1x.proxy_eap_logoff.enable = -####################################################################################### -## OpenVPN(Except T19P Model) ## -####################################################################################### -network.vpn_enable = -openvpn.url = - -####################################################################################### -## LLDP ## -####################################################################################### -network.lldp.enable = -network.lldp.packet_interval = - -####################################################################################### -## CDP ## -####################################################################################### -network.cdp.enable = -network.cdp.packet_interval = - -####################################################################################### -## Span to PC ## -####################################################################################### -network.span_to_pc_port = - -####################################################################################### -## RTP Port ## -####################################################################################### -##It configures the maximum local RTP port. -##The default value is 11800.It takes effect after a reboot.Integer from 1024 to 65535 -network.port.max_rtpport = - -##It configures the maximum local RTP port. -##The default value is 11780.It takes effect after a reboot.Integer from 1024 to 65535 -network.port.min_rtpport = - -####################################################################################### -## Syslog ## -####################################################################################### -syslog.mode = - -##It configures the IP address or domain name of the syslog server when exporting log to the syslog server. -##It takes effect only if the parameter ¡°syslog.mode¡± is configured as Server. -##The default value is blank.It takes effect after a reboot. -syslog.server = - -##It configures the detail level of syslog information to be exported.0 means nothing and 6 means all. -##The default value is 3.It takes effect after a reboot.Integer from 0 to 6 -syslog.log_level = - -####################################################################################### -## TR069(Except T41P/T42G Models) ## -####################################################################################### -managementserver.enable = -managementserver.username = -managementserver.password = -managementserver.url = -managementserver.connection_request_username = -managementserver.connection_request_password = -managementserver.periodic_inform_enable = -managementserver.periodic_inform_interval = - -####################################################################################### -## Autoprovision ## ## -####################################################################################### -### It enables or disables the phone to synchronize personalized configuration settings with the auto provisioning server. -### If it is set to 1 (Enabled), personalized configuration settings via web/phone user interface are saved in the MAC-local.cfg file on the phone, -### and then the phone will upload the MAC-local.cfg file to the provisioning server. During auto provisioning, the phone requests to download the MAC-local.cfg file on the provisioning server. -### 0-Disabled, 1-Enabled. The default value is 0. -auto_provision.custom.sync = - -### It enables or disables the phone to protect personalized configuration settings even after auto provisioning. -### If it is set to 1 (Enabled), personalized configuration settings via web/phone user interface will be protected and remained after auto provisioning. -### 0-Disabled, 1-Enabled. The default value is 0. -auto_provision.custom.protect = - -auto_provision.custom.upload_method= - -####################################################################################### -## Autop Mode ## -####################################################################################### -auto_provision.power_on = - -####################################################################################### -## Autop PNP ## -####################################################################################### -auto_provision.pnp_enable = - -####################################################################################### -## Autop DHCP ## -####################################################################################### -auto_provision.dhcp_option.enable = -auto_provision.dhcp_option.list_user_options = - -####################################################################################### -## Autop Repeat ## -####################################################################################### -auto_provision.repeat.enable = -auto_provision.repeat.minutes = - -####################################################################################### -## Autop Weekly ## -####################################################################################### -auto_provision.weekly.enable = -auto_provision.weekly.dayofweek = -auto_provision.weekly.begin_time = -auto_provision.weekly.end_time = - -####################################################################################### -## Autop URL ## -####################################################################################### -auto_provision.server.url = -auto_provision.server.username = -auto_provision.server.password = - -####################################################################################### -## Autop AES Key ## -####################################################################################### -##It configures the AES key for decrypting the Common CFG file. The valid characters contain: 0 ~ 9, A ~ Z, a ~ z. -##The default value is blank. -auto_provision.aes_key_16.com = - -##It configures the AES key for decrypting the MAC-Oriented CFG file. The valid characters contain: 0 ~ 9, A ~ Z, a ~ z. -##The default value is blank. -auto_provision.aes_key_16.mac = - -auto_provision.aes_key_in_file = - -##It configures the access URL of the custom MAC-Oriented CFG file. -##The default value is blank. -custom_mac_cfg.url = - -##It configures the value (vendor name of the device) of DHCP option 60. -##The default value is yealink. -auto_provision.dhcp_option.option60_value = - - - -####################################################################################### -## Autop wildcard ## -####################################################################################### - -auto_provision.url_wildcard.pn = - -####################################################################################### -## Autop Code ## -####################################################################################### -##It configures the name of the code for triggering auto provisioning. -##The default value is blank.It takes effect after a reboot. -autoprovision.1.name = - -##It configures the code for triggering auto provisioning. -##Valid characters are digits, # and *.Example:autoprovision.1.code = *99The default value is blank. -##It takes effect after a reboot. -autoprovision.1.code = - -##It configures the access URL of auto provisioning server.The default value is blank. -##It takes effect after a reboot. -autoprovision.1.url = - -##It configures the user name for authentication during auto provisioning. -##The default value is blank.It takes effect after a reboot. -autoprovision.1.user = - -##It configures the password for authentication during auto provisioning. -##The default value is blank.It takes effect after a reboot. -autoprovision.1.password = - -##It configures the AES key for decrypting the Common CFG file. -##The default value is blank.It takes effect after a reboot. -autoprovision.1.com_aes = - -##It configures the AES key for decrypting the MAC-Oriented CFG file. -##The default value is blank.It takes effect after a reboot. -autoprovision.1.mac_aes = - -####################################################################################### -## Watch Dog ## -####################################################################################### -watch_dog.enable = - -####################################################################################### -## SIP Advanced ## -####################################################################################### -sip.use_23_as_pound = -sip.rfc2543_hold = -sip.use_out_bound_in_dialog = -sip.reg_surge_prevention = -sip.send_response_by_request = -sip.notify_reboot_enable = -sip.disp_incall_to_info = -sip.limit_server_name = -sip.limit_server_reason = -sip.listen_port = -sip.tls_listen_port = -sip.trust_ctrl = -sip.nat_stun.enable = -sip.nat_stun.server = -sip.nat_stun.port = -sip.timer_t1 = -sip.timer_t2 = -sip.timer_t4 = -custom.features.redial_via_local_sip_server.enable = - - -##It is XSI authentication mode.0-Disable 1-Enable (Except T19P/T21P Models) -sip.authentication_for_xsi = -##It is DSS KEY to call park type, whether the trigger BLF function.It takes effect after a reboot. -##The default value is 0-Disable(DSS KEY to call park type,triggering BLF function) 1-Enable -sip.call_park_without_blf = -##It is ASCII conversion into corresponding symbols. -##The defalult value is blank. 0-Disable 1-Enable -sip.escape_characters.enable = -##The default value is 0 ( said according to the transmission mode configured to listen on port),1- -##1-said at the same time to monitor TCP and UDP -##2-said to monitor TCP and UDP at the same time, and from the BLF - the LIST to subscribe to the contact with a transport = TCP parameters -sip.listen_mode = -##The default value is 0-Disable, 1-Enable.It takes effect after a reboot. -##0-registered according to the uri of the tectonic refer - by domain -##1-according to refer the from header fields to construct refer - by domain - -sip.refer_by_header_auto_build = -##The default is blank.The Valid characters are digits - _.! ~ * # '() & Q462 = + R452 $,;?/ \ 0 -##It is username needs to be preserved in a special notation. -sip.reserve_characters = -##The default value is 0.(contracting out the random contact, via port to carry fixed port).It takes effect after a reboot. -##1-the out-contracting port random contact, via port to carry -##2-the out-contracting ports fixed contact, via carry fix -sip.tcp_port_random_mode = - - -####################################################################################### -## Echo Cancellation ## -####################################################################################### -voice.vad = -voice.cng = -voice.echo_cancellation = -voice.call_preview_mode = - -####################################################################################### -## Jitter Buffer ## -####################################################################################### -voice.jib.adaptive = -voice.jib.min = -voice.jib.max = -voice.jib.normal = - -####################################################################################### -## Tones ## -####################################################################################### -voice.tone.country = -voice.tone.dial = -voice.tone.ring = -voice.tone.busy = -voice.tone.congestion = -voice.tone.callwaiting = -voice.tone.dialrecall = -voice.tone.info = -voice.tone.stutter = -voice.tone.autoanswer = -voice.tone.message = - -####################################################################################### -## Volume ## -####################################################################################### -voice.handfree.spk_vol = -voice.handfree.tone_vol = -voice.handset.spk_vol = -voice.handset.tone_vol = -voice.headset.spk_vol = -voice.headset.tone_vol = -voice.ring_vol= -voice.group_spk_vol = - -### Only T28P/T26P/T22P/T20P Models support the three parameters -voice.handfree_send = -voice.handset_send = -voice.headset_send = - -####################################################################################### -## Transfer ## -####################################################################################### -##It enables or disables the transferee party¡¯s phone to prompt a missed call on the LCD screen before displaying -##the caller ID when performing a semi-attended transfer.0-Enabled,1-Disabled -##The default value is 1. -transfer.semi_attend_tran_enable = - -##It enables or disables the phone to complete the blind transfer through on-hook.0-Disabled,1-Enabled . -##The default value is 1. -transfer.blind_tran_on_hook_enable = - -##It enables or disables the phone to transfer call to the two parties after a local conference call hangs up. -##0-Disabled,1-Enabled. -##The default value is 0. -transfer.tran_others_after_conf_enable = - -##It enables or disables the phone to complete the attended transfer through on-hook. -##0-Disabled,1-Enabled. -##The default value is 1. -transfer.on_hook_trans_enable = - -##It configures the DSS key behavior during an active call when user presses the DSS -##key and the DSS key is configured as a speed dial, transfer or BLF/BLF list key. -##0-New Call,1-Attended Transfer,2-Blind Transfer. -##The default value is 2. -transfer.dsskey_deal_type = - -###Except T20P/T41P/T42G/T46G Models -##It enables or disables the phone to enter Transfer to menu during multiple calls when pressing the transfer soft key or TRAN key. -##0-Disabled,1-Enabled. -##The default value is 1. -transfer.multi_call_trans_enable = - -####################################################################################### -## Language Settings ## -####################################################################################### -##It configures the language of the web user interface. -##Chinese_S is only applicable to SIP-T19P, SIP-T21P and SIP-T46G IP phones. -##Chinese_T is only applicable to SIP-T46G IP phones. -##French, Portuguese and Spanish are not applicable to SIP-T19P and SIP-T21P IP phones. -lang.wui = - -##It configures the language of the phone user interface. -##Chinese_S and Chinese_T are only applicable to SIP-T19P, SIP-T21P and SIP-T46G IP phones. -##The default value is English. -lang.gui = - -gui_lang.url = -gui_lang.delete = -##Except T19P/T21P Models -wui_lang.url = -wui_lang_note.url = -wui_lang.delete = - -####################################################################################### -## Auto Redial ## -####################################################################################### -auto_redial.enable = -auto_redial.interval = -auto_redial.times = - -####################################################################################### -## Zero Touch ## -####################################################################################### -zero_touch.enable = -zero_touch.wait_time = -zero_touch.network_fail_wait_times = -zero_touch.network_fail_delay_times = - -####################################################################################### -## Push XML ## -####################################################################################### -push_xml.server = -push_xml.block_in_calling= -push_xml.sip_notify= - -####################################################################################### -## Dial Plan ## -####################################################################################### -dialplan.area_code.code = -dialplan.area_code.min_len = -dialplan.area_code.max_len = -dialplan.area_code.line_id = - -### X ranges from 1 to 10 -###dialplan.block_out.number.x = -###dialplan.block_out.line_id.x = - -dialplan.block_out.number.1 = -dialplan.block_out.line_id.1 = - -###X ranges from 1 to 100 -###dialplan.dialnow.rule.X = -###dialplan.dialnow.line_id.X = - -dialplan.dialnow.rule.1 = -dialplan.dialnow.line_id.1 = - -###X ranges from 1 to 100 -###dialplan.replace.prefix.X = -###dialplan.replace.replace.X = -###dialplan.replace.line_id.X = - -dialplan.replace.prefix.1 = -dialplan.replace.replace.1 = -dialplan.replace.line_id.1 = - -dialplan_dialnow.url = -phone_setting.dialnow_delay = -dialplan_replace_rule.url = - - -####################################################################################### -## Remote Phonebook(Except T20P Model) ## -####################################################################################### -###X ranges from 1 to 5 -###remote_phonebook.data.X.url = -###remote_phonebook.data.X.name = - -remote_phonebook.data.1.url = -remote_phonebook.data.1.name = - -###Except T41P/T42G Models -remote_phonebook.display_name = - -###It enables or disables the phone to update the data of the remote phone book at a time when accessing the remote phone book. -###0-Disabled, 1-Enabled. The default value is 0.(Except T19P/T21P Models) -features.remote_phonebook.enter_update_enable = - -##It enables or disables the phone to perform a remote phone book search when receiving an incoming call. -##0-Disabled,1-Enabled. -##The default value is 0. -features.remote_phonebook.enable = - -##It configures the interval (in seconds) for the phone to update the data of the remote phone book from the remote phone book server. -##The value 0 means the phone will not regularly update the data of the remote phone book from the remote phone book server. -##The default value is 21600.Integer from 3600 to 2592000,and 0. -features.remote_phonebook.flash_time = - -####################################################################################### -## LDAP(Except T19P/T20P Models) ## -####################################################################################### -##It enables or disables LDAP feature.0-Disabled,1-Enabled. -##The default value is 0. -ldap.enable = - -##It configures the criteria for searching the contact name attributes. -##Example:ldap.name_filter = (|(cn=%)(sn=%)). -##The default value is blank. -ldap.name_filter = - -##It configures the criteria for searching the contact number attributes. -##Example:ldap.number_filter = (|(telephoneNumber=%)(mobile=%)(ipPhone=%)) -##The default value is blank. -ldap.number_filter = - -##It configures the IP address or domain name of the LDAP server. -##The default value is blank. -ldap.host = - -##It configures the port of the LDAP server. -##The default value is 389.Integer from 1 to 65535. -ldap.port = - -##It configures the LDAP search base which corresponds to the location of the LDAP phonebook. -##Example:ldap.base = dc=yealink,dc=cn. -##The default value is blank. -ldap.base = - -##It configures the user name for accessing the LDAP server. -##The default value is blank. -ldap.user = - -##It configures the password for accessing the LDAP server. -##The default value is blank. -ldap.password = - -##It configures the maximum of the search results returned by the LDAP server to be displayed. -##The default value is 50.Integer from 1 to 32000. -ldap.max_hits = - -##It configures the name attributes of each record to be returned by the LDAP server. -##Multiple attributes are separated by spaces.Example:ldap.name_attr =sn cn. -##The default value is blank. -ldap.name_attr = - -##It configures the number attributes of each record to be returned by the LDAP server. -##Multiple attributes are separated by spaces.Example:ldap.numb_attr = Mobile ipPhone. -##The default value is blank. -ldap.numb_attr = - -##It configures the display name of the contact record displayed on the LCD screen. The value of this parameter must start with ¡°%¡± symbol. -##Example:ldap.display_name = %cn -##The default value is blank. -ldap.display_name = - -##It configures the LDAP version. -##The default value is 3. -ldap.version = - -##It enables or disables the phone to perform an LDAP search when receiving an incoming call. -##0-Disabled,1-Enabled. -##The default value is 0. -ldap.call_in_lookup = - -##It enables or disables the phone to sort the search results in alphabetical order or numerical order. -##0-Disabled,1-Enabled. -##The default value is 0. -ldap.ldap_sort = -##It is the electricity + start, automatic search + 00 the beginning and the beginning of the numbe -##The default value is 0.(0-Disable,1-Enable )(Except T19P/T21P Models) -ldap.incoming_call_special_search.enable = -##The default value is 0,value of 0 to 2, respectively the ldap, ldap + StarTLS and ldaps -ldap.tls_mode = -ldap.call_out_lookup = - -####################################################################################### -## Features ## -####################################################################################### -features.normal_refuse_code = -features.auto_answer_delay = -features.allow_mute = -features.group_listen_in_talking_enable = -features.call_completion_enable = -features.call_num_filter = -features.direct_ip_call_enable = -features.relog_offtime = -features.ringer_device.is_use_headset = -features.factory_pwd_enable = -features.anonymous_response_code = -features.export_cfg_erase_pwd = -features.show_action_uri_option = -features.reset_by_long_press_enable = -features.show_anywhere_remote_office_enable = -features.upload_server = -features.call_log_show_num = -features.ldap.input_type = -features.call_invite_format = -action_url.show_msgbox = -phone_setting.logon_wizard_forever_wait = -features.call_invite_format = -features.transfer_type = -features.caller_name_type_on_dialing = -phone_setting.unregister_account_block_out.enable= -gui_input_method.delete = -features.off_hook_answer.enable = - - - -##Only for T46G Models support this parameter -features.block_linekey_in_menu.enable = - -features.shorten_linekey_label.enable = -features.dsskey_blind_tran = -features.special_auto_answer_tone = -features.blf_pickup_only_send_code = -features.display_method_on_dialing = - - -##It is configured in the middle of the screen shows the current default at the bottom of the account name. -##The default is 0.CNT version 1. -features.show_default_account= - -## Except T4X Models support this -features.reboot_in_talk_enable = - -## Except T19P/T21P Models support this -features.barge_in_via_username.enable = - -features.flash_url_dsskey_led.enable = -features.default_account = -features.forward_call_popup.enable = -features.linekey_call_with_default_account = -features.missed_call_popup.enable = -features.text_message_popup.enable = -features.voice_mail_popup.enable = -features.hide_feature_access_codes.enable = - -## Except T19P/T21P/T4X Models support this -features.hide_caller_id.enable = - -## Only for T4X Models support this parameter -features.hide_zero_touch_url.enable = - -## Only T46G Models support this parameter -features.config_dsskey_length = - - - -####################################################################################### -## Features Forward ## -####################################################################################### - -###Except T19P Model -features.fwd_mode = - -features.fwd_diversion_enable = - -####################################################################################### -## Features DND ## -####################################################################################### - -###Except T19P Model -features.dnd_mode = - -features.dnd.enable = -features.dnd.on_code = -features.dnd.off_code = -features.dnd_refuse_code = -features.dnd.emergency_enable = -features.dnd.emergency_authorized_number = - -####################################################################################### -## Features Bluetooth(Only for T46G model) ## -####################################################################################### -features.bluetooth_enable = - -####################################################################################### -## Features BLF ## -####################################################################################### -##It configures BLF LED mode and provides four kinds of definition for the BLF/BLF list key LED status. -##For more information, refer to BLF LED Mode on page 218. -##The default value is 0. -features.blf_led_mode = - -##It enables or disables the phone to deal with the Version header in the BLF NOTIFY message sent by the server. -##0-Disabled,1-Enabled. -##The default value is 0.It takes effect after a reboot. -features.blf_list_version = - -####################################################################################### -## Features Intercom ## -####################################################################################### -features.intercom.allow = -features.intercom.mute = -features.intercom.tone = -features.intercom.barge = - -####################################################################################### -## Features Hotline ## -####################################################################################### -##It configures the hotline number. -##The default value is blank. -features.hotline_number = - -##It configures the delay time (in seconds) for the phone to dial out the hotline number automatically. -##The default value of delay time is 4.Integer from 0 to 10 -features.hotline_delay = - -####################################################################################### -## Features DTMF ## -####################################################################################### -features.dtmf.hide = - -###Except T20P Model -features.dtmf.hide_delay = - -features.dtmf.repetition = -features.dtmf.transfer = -features.dtmf.replace_tran = -features.dtmf.duration = -features.dtmf.volume = - -####################################################################################### -## Features Audio Settings ## -####################################################################################### -features.headset_prior = - -###Except T19P/T21P Models -features.headset_training = -features.alert_info_tone = -features.busy_tone_delay = -features.send_pound_key = -features.key_as_send = -features.send_key_tone = -features.key_tone = -features.play_hold_tone.enable = -features.play_hold_tone.delay = -features.redial_tone = -features.partition_tone = - -####################################################################################### -## Features Action URI ## -####################################################################################### -features.action_uri_limit_ip = - - -####################################################################################### -## Features Prefix ## -####################################################################################### -features.password_dial.enable = -features.password_dial.prefix = -features.password_dial.length = - -####################################################################################### -## Features History ## -####################################################################################### -features.save_call_history = - -####################################################################################### -## Notification Popups ## -####################################################################################### -features.voice_mail_popup.enable= -features.missed_call_popup.enable= -features.forward_call_popup.enable= -features.text_message_popup.enable= - -####################################################################################### -## Ringtone ## -####################################################################################### -ringtone.url = -ringtone.delete = - -####################################################################################### -## Phone Settings ## -####################################################################################### -phone_setting.inter_digit_time = -phone_setting.ring_type = - -phone_setting.ring_for_tranfailed = -phone_setting.is_deal180 = -phone_setting.show_code403 = -phone_setting.label_scroll_interval_time = - - -###Only T41P/T42G/T46G Models support this parameter -phone_setting.page_tip = - -phone_setting.predial_autodial = -phone_setting.headsetkey_mode = -features.voice_mail_tone_enable = -##Except T19P/T21P Models support this parameter -phone_setting.reserve_certs_enable = -phone_setting.called_party_info_display.enable = - -phone_setting.call_info_display_method = -## Only for T4X Models support this parameter - - - -####################################################################################### -## Power Led Settings ## -####################################################################################### -phone_setting.common_power_led_enable = -phone_setting.talk_and_dial_power_led_enable = -phone_setting.mail_power_led_flash_enable = -phone_setting.ring_power_led_flash_enable = -phone_setting.mute_power_led_flash_enable= -phone_setting.hold_and_held_power_led_flash_enable = - -##It configures the level of the active backlight intensity. -##For SIP-T28P IP phones and the connected EXP39: -##The default value is 2. -##For SIP-T46G IP phones and the connected EXP40: -##The default value is 8. -phone_setting.active_backlight_level = - -##It configures the phone to go out or reduce intensity of the backlight on the LCD screen after a period of inactivity. -##0-Off,1-Low. -##The default value is 1. -phone_setting.inactive_backlight_level = - -####################################################################################### -## Phone Setting Display ## -####################################################################################### - -###Except T20P/T19P/T21P Models -##It configures the backlight time (in seconds).0, 1, 15, 30, 60, 120, 300, 600 or 1800. -phone_setting.backlight_time = - -###Except T20P/T22P/T41P/T42G Models -###It configures the contrast of the LCD screen. -###For SIP-T19P and SIP-T21P IP phones, it configures the LCD¡¯s contrast of the phone only. -###For SIP-T26P IP phones, it configures the LCD¡¯s contrast of the connected EXP39 only. -###For SIP-T28P IP phones, it configures the LCD¡¯s contrast of the IP phone and the connected EXP39. -###For SIP-T46G IP phones, it configures the LCD¡¯s contrast of the connected EXP40 only. -###The default value is 6. -phone_setting.contrast = - -###Except T46G Model -##It configures the logo mode of the LCD screen (except for SIP-T20P IP phones). -##For SIP-T19P/T21P/T22P/T26P/T41P/T42G IP phones: -##0-Disabled 1-System logo 2-Custom logo -##The default value is 0. -##For SIP-T28P IP phones: -##1-System logo 2-Custom logo -##The default value is 1. -##It enables or disables a text logo (for SIP-T20P IP phones). -##0-Disabled 1-Enabled -##The default value is 0. -phone_setting.lcd_logo.mode = - -###Only T20P Model supports this parameter -##It configures a text logo. -##The default value is Yealink. -phone_setting.lcd_logo.text = - -###Except T20P/T46G Models -lcd_logo.url = -lcd_logo.delete = - -###Only T46G Model supports the two parameters -###It configures the wallpaper displayed on the phone. -###Example:To configure a phone built-in picture (e.g., 1.png) to be wallpaper, the value format is: -###phone_setting.backgrounds = Resource:1.png -###To configure a custom picture (e.g., custom1.png) to be wallpaper, the value format is: Config:custom1.png -###The default value is Resource:Default.jpg. -phone_setting.backgrounds = - -wallpaper_upload.url = - -####################################################################################### -## Phone Setting BLF ## -####################################################################################### -###It enables or disables the phone to automatically configure the BLF list keys in order. -###0-Disabled,1-Enabled. -###The default value is 1. - -phone_setting.auto_blf_list_enable = - -###Only T26P/T28P/T46G Models support the parameter -###It configures the order of BLF list keys assigned automatically. -###0-Line Keys->Memory Keys->Extension Keys -###1-Extension Keys->Memory Keys->Line Keys -###Memory keys are not applicable to SIP-T46G IP phones. -###The default value is 0. -phone_setting.blf_list_sequence_type = - -####################################################################################### -## Key Lock ## -####################################################################################### -##Except T41P/T42G/T46G Models -phone_setting.lock = - -###Only T41P/T42G/T46G Models support the two parameters -###It enables or disables keypad lock feature. -###0-Disabled,1-Enabled. -###The default value is 0. -phone_setting.phone_lock.enable = - -###It configures the keypad lock type. -###0-All Keys,1-Function Keys,2-Menu Key. -###The default value is 0. -phone_setting.phone_lock.lock_key_type = - -###It configures the password for unlocking the keypad. -###The default value is 123. -phone_setting.phone_lock.unlock_pin = - -###It configures the interval (in seconds) to automatically lock the keypad. -###The default value is 0 (the keypad is locked only by long pressing the pound key or pressing the keypad lock key) -phone_setting.phone_lock.lock_time_out = -phone_setting.emergency.number = - -####################################################################################### -## Multicast ## -####################################################################################### - -###Except T19P Model -multicast.codec = - -multicast.receive_priority.enable = -multicast.receive_priority.priority = - -###X ranges from 1 to 10 -###multicast.listen_address.X.label = -###multicast.listen_address.X.ip_address = - -multicast.listen_address.X.label = -multicast.listen_address.X.ip_address = -###Except T19P/T21P Models support this parameter (£¨X:1-10£©) - -multicast.paging_address.X.ip_address = -multicast.paging_address.X.label = -####################################################################################### -## Super Search(Except T20P Model) ## -####################################################################################### -super_search.recent_call = -super_search.url = - -####################################################################################### -## Security ## -####################################################################################### -###Define the login username and password of the user, var and administrator. -###If you change the username of the administrator from "admin" to "admin1", your new administrator's username should be configured as: security.user_name.admin = admin1. -###If you change the password of the administrator from "admin" to "admin1pwd", your new administrator's password should be configured as: security.user_password = admin1:admin1pwd. - -###The following examples change the user's username to "user23" and the user's password to "user23pwd". -###security.user_name.user = user23 -###security.user_password = user23:user23pwd -###The following examples change the var's username to "var55" and the var's password to "var55pwd". -###security.user_name.var = var55 -###security.user_password = var55:var55pwd -security.user_name.user = -security.user_name.admin = -security.user_name.var = -security.user_password = - -###It enables or disables the phone to only accept the certificates in the Trusted Certificates list. -###0-Disabled,1-Enabled. -###The default value is 1.It takes effect after a reboot. -security.trust_certificates = - -###It configures the source certificates for the phone to authenticate for TLS connection. -###0-Default certificates,1-Custom certificates,2-All certificates. -###The default value is 0.It takes effect after a reboot. -security.ca_cert = - -###It configures the device certificates for the phone to send for TLS authentication. -###0-Default certificates,1-Custom certificates. -###The default value is 0.It takes effect after a reboot. -security.dev_cert = - -###It enables or disables the phone to mandatorily validate the CommonName or SubjectAltName of the certificate received from the connecting server. -###0-Disabled,1-Enabled. -###The default value is 0.It takes effect after a reboot. -security.cn_validation = - -security.trust_custom_certificates = - -####################################################################################### -## User Mode ## -####################################################################################### -###It enables or disables the 3-level permissions (admin, user, var). -###0-Disabled,1-Enabled. -###The default value is 0.It takes effect after a reboot. -security.var_enable = - -web_item_level.url = - -####################################################################################### -## Trusted Certificates ## -####################################################################################### -trusted_certificates.url = -trusted_certificates.delete = - -####################################################################################### -## Server Certificates ## -####################################################################################### -server_certificates.url = -server_certificates.delete = - -####################################################################################### -## Memory Key(Only for T26P/T28P Models) ## -####################################################################################### -###T26P/T28P X ranges from 1 to 10 - -#memorykey.X.type--Customize the Memorykey type. -#The valid types are: - -#0-NA 1-Conference 2-Forward 3-Transfer 4-Hold 5-DND 7-Call Return 8-SMS 9-Directed Pickup 10-Call Park 11-DTMF 12-Voice Mail 13-Speed Dial 14-Intercom -#15-Line 16-BLF 17-URL 18-Group Listening 20-Private Hold 22-XML Group 23-Group Pickup 24-Multicast Paging 25-Record 27-XML Browser -#34-Hot Desking 35-URL Record 38-LDAP 39-BLF List 40-Prefix 41-Zero Touch 42-ACD 45-Local Group 46-Network Group 49-Custom Button -#50-Keypad Lock 55-Meet-Me Conference 56-Retrieve Park 57-Hoteling 58-ACD Grace 59-Sisp Code 60-Emergency 61-Directory - -###memorykey.X.line = -###memorykey.X.value = -###memorykey.X.pickup_value = -###memorykey.X.type = -###memorykey.X.xml_phonebook = - -###It configures the desired line to apply the key feature. -###The default value is 1.Integer from 1 to 6 -memorykey.1.line = - -###It configures the value of the memory key feature. -###For example, when set the key feature to BLF, it configures the number of the monitored user. -###The default value is blank. -memorykey.1.value = - -###It configures the pickup code for BLF feature or conference ID followed by the # sign for Meet-Me conference feature. -###It only applies to BLF and Meet-Me conference features. -###The default value is blank. -memorykey.1.pickup_value = - -###It configures the desired feature for memory key X. -###The default value is 0. -memorykey.1.type = - -###It configures the desired local group/XML group/network group for the memory key X. -###It only applies to the Local Group, XML Group and Network Group features. -###The default value is 0. -memorykey.1.xml_phonebook = - -####################################################################################### -## Line Key ## -####################################################################################### -###Except T19D Model -###T21D/T20P X ranges from 1 to 2 -###T22P/T26P X ranges from 1 to 3 -###T28P X ranges from 1 to 6 -###T41P/T42G X ranges from 1 to 15 -###T46G X ranges from 1 to 27 - -#linekey.X.type--Customize the linekey type. -#The valid types are: - -#0-NA 1-Conference 2-Forward 3-Transfer 4-Hold 5-DND 7-Call Return 8-SMS 9-Directed Pickup 10-Call Park 11-DTMF 12-Voice Mail 13-Speed Dial -#14-Intercom 15-Line 16-BLF 17-URL 18-Group Listening 20-Private Hold 22-XML Group 23-Group Pickup 24-Multicast Paging 25-Record 27-XML Browser -#34-Hot Desking 35-URL Record 38-LDAP 39-BLF List 40-Prefix 41-Zero Touch 42-ACD 45-Local Group 46-Network Group 49-Custom Button 50-Keypad Lock -#55-Meet-Me Conference 56-Retrieve Park 57-Hoteling 58-ACD Grace 59-Sisp Code 60-Emergency 61-Directory - -#0-NA £¨Only for T41/T42/T46) -#22-XML Group (Not support T20) -#38-LDAP (Not support T20) -#46-Network Group (Not support T20) -#8-SMS (Only support T21/T46/T22/T26/T28) -#17-URL (Only support T41/T42/T46) -#49-Custom Button (Only support T20/T22/T26/T28) - -###linekey.X.line = -###linekey.X.value = -###linekey.X.pickup_value = -###linekey.X.type = -###linekey.X.xml_phonebook = -###linekey.X.label = - -###It configures the desired line to apply the key feature.Integer from 1 to 6 -linekey.1.line = - -###It configures the value of the line key feature. -###For example, when setting the key feature to BLF, it configures the number of the monitored user. -###The default value is blank. -linekey.1.value = - -###It configures the pickup code for BLF feature or conference ID followed by the # sign for Meet-Me conference feature. -###It only applies to BLF and Meet-Me conference features. -###The default value is blank. -linekey.1.pickup_value = - -###It configures the key feature for the line key X. -linekey.1.type = - -###It configures the desired local group/XML group/network group for the line key X. -###It only applies to the Local Group, XML Group and Network Group features. -###XML Group and Network Group features are not applicable to SIP-T20P IP phones. -linekey.1.xml_phonebook = - -###It configures the label displayed on the LCD screen for each line key. -###The default value is blank. -linekey.1.label = - -####################################################################################### -## Programable Key ## -####################################################################################### -###T20P X ranges from 1 to 9 -###T28P/T26P X ranges from 1 to 14 -###T41P/T42G/T19P/T21P X ranges from 1 to 11 -###T46G/T22P X ranges from 1 to 13 - -#programablekey.x.type--Customize the programmable key type. -#The valid types are: -#0-NA 2-Forward 5-DND 7-Call Return 8-SMS 9-Directed Pickup 13-Speed Dial -#22-XML Group 23-Group Pickup 27-XML Browser 28-History 30-Menu 31-Switch Account 32-New SMS -#33-Status 34-Hot Desking 38-LDAP 40-Prefix 41-Zero Touch 43-Local Directory 44-Network Directory 45-Local Group -#46-Network Group 47-XML Directory 50-Keypad Lock 51-Switch Account Up 52-Switch Account Down 55-Meet-Me Conference 61-Directory - -#40-Prefix (Not support T20) -#22-XML Group (Not support T20) -#31-Switch Account (Not support T19/T41/T42/T46) -#38-LDAP (Not support T19/T20) -#46-Network Group (Not support T20) -#8-SMS (Not support T41/T42/T20) -#32-New SMS (Not support T41/T42/T20) -#47-XML Directory (Not support T20) -#44-Network Directory (Not support T20) -#41-Zero Touch (Not support T41/T42/T46) -#34-Hot Desking (Only support T19/T46 -#51-Switch Account Up (Only support T41/T42/T46) -#52-Switch Account Down (Only support T41/T42/T46) - -###programablekey.X.type = -###programablekey.X.line = -###programablekey.X.value = -###programablekey.X.xml_phonebook = -###programablekey.X.history_type = -###programablekey.X.label = -###programablekey.X.pickup_value = - -###It configures the key feature for the programmable key X. -programablekey.1.type = - -###It configures the desired line to apply the programmable key feature. -programablekey.1.line = - -###It configures the value of the programmable key feature. -###For example, when configuring the key feature to be Speed Dial, it configures the number. -###The default value is blank. -programablekey.1.value = - -###It configures the desired local group/XML group/network group for the programmable key. -###It only applies to the Local Group, XML Group and Network Group features. -###XML Group and Network Group features are not applicable to SIP-T20P IP phones. -programablekey.1.xml_phonebook = - -###It configures the history type of programmable key. -###0-Local History,1-Network History. -###The default value is 0. -programablekey.1.history_type = - -###It configures the label displayed on the LCD screen for each soft key. -###The default value is blank. -programablekey.1.label = - -###It configures conference ID followed by the # sign for Meet-Me conference feature. -###It only applies to Meet-Me conference feature. -###The default value is blank. -programablekey.1.pickup_value = - -####################################################################################### -## Expansion Key(Only for T26P/T28P/T46G Models) ## -####################################################################################### -###T46G/T28P/T26P X ranges from 1 to 6, Y ranges from 1 to 40 - -###expansion_module.X.key.Y.type = -###expansion_module.X.key.Y.line = -###expansion_module.X.key.Y.value = -###expansion_module.X.key.Y.pickup_value = -###expansion_module.X.key.Y.label = -###expansion_module.X.key.Y.xml_phonebook = - -###It configures the key feature of the expansion module X key Y. -expansion_module.1.key.1.type = - -###It configures the desired line to apply the expansion module key feature.Integer from 1 to 6 -expansion_module.1.key.1.line = - -###It configures the value of the expansion module key feature. -###The default value is blank. -expansion_module.1.key.1.value = - -###It configures the pickup code for BLF feature or conference ID followed by the # sign for Meet-Me conference feature. -###It only applies to BLF and Meet-Me conference features. -###The default value is blank. -expansion_module.1.key.1.pickup_value = - -###It configures the label displayed on the LCD screen of the expansion module for each key. -###The default value is blank. -expansion_module.1.key.1.label = - -###It only applies to the Local Group, XML Group and Network Group features.Integer from 0 to 48. -expansion_module.1.key.1.xml_phonebook = - -####################################################################################### -## Forward Always ## -####################################################################################### -forward.always.enable = -forward.always.target = -forward.always.on_code = -forward.always.off_code = - -####################################################################################### -## Forward Busy ## -####################################################################################### -forward.busy.enable = -forward.busy.target = -forward.busy.on_code = -forward.busy.off_code = - -####################################################################################### -## Forward No Answer ## -####################################################################################### -forward.no_answer.enable = -forward.no_answer.target = -forward.no_answer.timeout = -forward.no_answer.on_code = -forward.no_answer.off_code = - -####################################################################################### -## Forward International ## -####################################################################################### -###It enables or disables the phone to forward incoming calls to international numbers. -###0-Disabled,1-Enabled. -###The default value is 1. -forward.international.enable = - -####################################################################################### -## ACD ## -####################################################################################### -acd.auto_available = -acd.auto_available_timer = - -####################################################################################### -## Hotdesking Startup ## -####################################################################################### -phone_setting.logon_wizard = -##The default value is 1.Except T19P/T21P -features.auto_exit_logon_wizard.enable = -############## -hotdesking.startup_register_name_enable = -hotdesking.startup_username_enable = -hotdesking.startup_password_enable = -hotdesking.startup_sip_server_enable = -hotdesking.startup_outbound_enable = - -####################################################################################### -## Hotdesking Dsskey ## -####################################################################################### -hotdesking.dsskey_register_name_enable = -hotdesking.dsskey_username_enable = -hotdesking.dsskey_password_enable = -hotdesking.dsskey_sip_server_enable = -hotdesking.dsskey_outbound_enable = - -####################################################################################### -## Alert Info ## -####################################################################################### -###X ranges from 1 to 100 -###distinctive_ring_tones.alert_info.x.text = -###distinctive_ring_tones.alert_info.x.ringer = - -###It configures the internal ringer text for distinctive ringtone. -###Example: distinctive_ring_tones.alert_info.1.text = Family -###The default value is blank. -distinctive_ring_tones.alert_info.1.text = - -###It configures the desired ring tones for each text. -###The value ranges from 1 to 8, the digit stands for the appropriate ringtone. -###Ring tones 6-8 are only applicable to SIP-T46G IP phones. -###The default value is 1. -distinctive_ring_tones.alert_info.1.ringer = - -####################################################################################### -## Call Waiting ## -####################################################################################### -call_waiting.enable = -call_waiting.tone = -call_waiting.on_code = -call_waiting.off_code = - -####################################################################################### -## Action URL ## -####################################################################################### -action_url.setup_completed = -action_url.registered = -action_url.unregistered = -action_url.register_failed = -action_url.off_hook = -action_url.on_hook = -action_url.incoming_call = -action_url.outgoing_call = -action_url.call_established = -action_url.dnd_on = -action_url.dnd_off = -action_url.always_fwd_on = -action_url.always_fwd_off = -action_url.busy_fwd_on = -action_url.busy_fwd_off = -action_url.no_answer_fwd_on = -action_url.no_answer_fwd_off = -action_url.transfer_call = -action_url.blind_transfer_call = -action_url.attended_transfer_call = -action_url.hold = -action_url.unhold = -action_url.mute = -action_url.unmute = -action_url.missed_call = -action_url.call_terminated = -action_url.busy_to_idle = -action_url.idle_to_busy = -action_url.ip_change = -action_url.forward_incoming_call = -action_url.reject_incoming_call = -action_url.answer_new_incoming_call = -action_url.transfer_finished = -action_url.transfer_failed = -action_url.setup_autop_finish = -action_url.held = -action_url.unheld = - - - -####################################################################################### -## Contact ## -####################################################################################### -local_contact.data.url = -###(Only T48G Model supports the parameter) -local_contact.image.url = -local_contact.icon.url = - -###(Only T46G Model supports the parameter) -local_contact.data_photo_tar.url = - -###(Except T20P Model) -directory_setting.url = -## Except T19P/T21P Model supports the parameter -directory.edit_default_input_method = -directory.search_default_input_method = -phone_setting.dsskey_directory_auto.enable = - -####################################################################################### -## Custom Factory Configuration ## -####################################################################################### -custom_factory_configuration.url = -features.custom_factory_config.enable = - -####################################################################################### -## Custom Configuration ## -####################################################################################### -configuration.url = - -####################################################################################### -## Custom Softkey(Except T20P Model) ## -####################################################################################### -phone_setting.custom_softkey_enable = -custom_softkey_call_failed.url = -custom_softkey_call_in.url = -custom_softkey_connecting.url = -custom_softkey_dialing.url = -custom_softkey_ring_back.url = -custom_softkey_talking.url = - -####################################################################################### -## Custom Input Method ## -####################################################################################### -gui_input_method.url = - -####################################################################################### -## Configure the access URL of firmware ## -####################################################################################### -###It configures the access URL of the firmware file. -###The default value is blank.It takes effect after a reboot. -firmware.url = - -####################################################################################### -## RTCP ## -####################################################################################### -###(Except T23 Model) -phone_setting.rtcp_xr_report.enable = -phone_setting.vq_rtcpxr.interval_report.enable = -phone_setting.vq_rtcpxr.session_report.enable = -phone_setting.vq_rtcpxr.states_show_on_gui.enable = -phone_setting.vq_rtcpxr.states_show_on_web.enable = -phone_setting.vq_rtcpxr_delay_threshold_critical = -phone_setting.vq_rtcpxr_delay_threshold_warming = -phone_setting.vq_rtcpxr_display_jitter.enable = -phone_setting.vq_rtcpxr_display_jitter_buffer_max.enable = -phone_setting.vq_rtcpxr_display_local_call_id.enable = -phone_setting.vq_rtcpxr_display_local_codec.enable = -phone_setting.vq_rtcpxr_display_moscq.enable = -phone_setting.vq_rtcpxr_display_moslq.enable = -phone_setting.vq_rtcpxr_display_packets_lost.enable = -phone_setting.vq_rtcpxr_display_remote_call_id.enable = -phone_setting.vq_rtcpxr_display_remote_codec.enable = -phone_setting.vq_rtcpxr_display_round_trip_delay.enable = -phone_setting.vq_rtcpxr_display_start_time.enable = -phone_setting.vq_rtcpxr_display_stop_time.enable = -phone_setting.vq_rtcpxr_display_symm_oneway_delay.enable = -phone_setting.vq_rtcpxr_interval_period = -phone_setting.vq_rtcpxr_moslq_threshold_critical = -phone_setting.vq_rtcpxr_moslq_threshold_warming = -####################################################################################### -## Reboot ## -####################################################################################### -auto_provision.reboot_force.enable = - -####################################################################################### -## Call Display ## -####################################################################################### -phone_setting.called_party_info_display.enable = -phone_setting.call_info_display_method = -##(Except T23 Model) -phone_setting.contact_photo_display.enable = - - - - - - -